Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Antioch Owner’s Guide
We install and service KraftMaid cabinetry and the parts that keep it working in Antioch, and our kitchen remodels here typically run $14,000 to $45,000 installed. Most of the KraftMaid calls we get in Antioch start the same way: a drawer that won’t stay closed, a soft-close door that slams, or a hinge that’s pulled loose from the cabinet frame and left a ragged screw hole behind. The owner usually lived with it for months before realizing the fix is a matched part, not a whole new kitchen. Groundwork Construction Co. of Antioch is an independent service provider and is not affiliated with KraftMaid.
Which KraftMaid Models This Applies To
KraftMaid has built cabinets across several lines over the decades, and the part you need depends on which one is in your kitchen. The common residential series most Antioch homes have are the company’s standard full-overlay and partial-overlay cabinet lines, plus the semi-custom lines sold through big-box design centers. The parts are not interchangeable between them. A soft-close under-mount drawer glide from one line has a different mounting pattern, screw spacing and travel length than another, and a hinge bored for a 35mm cup won’t fit a frame drilled for a different pattern. Before you order anything, find the label. KraftMaid places a manufacturing label inside the cabinet box, usually on the back wall or the inside of a side panel, and it carries the model and series codes you need to match a part. If the label is gone, measure: the hinge cup diameter, the door overlay distance, and the drawer box width and depth. On the OEM-versus-aftermarket call, our advice for KraftMaid specifically is to match OEM on hinges and drawer glides, because the aftermarket equivalents sold online often have different screw hole spacing and you end up re-drilling the frame. For finish-matched touch-up and decorative hardware, a quality aftermarket part is fine.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
These are the failures we see most in Antioch kitchens, each with what’s really going on behind it.
- Doors that hang crooked or rub the frame. The hinge has lost tension or the cup screws have stripped out of the door. Once a hinge starts drifting, adjusting it buys weeks, not years.
- Soft-close drawers that slam shut. The damping mechanism inside the glide has failed. It’s a sealed unit, so the fix is a replacement glide, not a repair.
- Sagging or stuck drawers. The glide’s roller or slide has worn flat, or the drawer box has racked out of square. In Antioch’s dry inland summers, wood drawer boxes shrink slightly and can make a marginal glide bind worse.
- Hinges pulling out of the cabinet frame. Screw holes in the particleboard or plywood frame have stripped. This is common when a door has been swung past its stop for years, and it needs a proper fix, not a bigger screw.
- Doors that won’t stay closed or pop open. The hinge spring has fatigued, or the cabinet is out of square from settling. Both show up in older Antioch homes where a kitchen was built before the slab or framing settled.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Replacing failed KraftMaid hardware is far cheaper than most owners expect, and a full Antioch kitchen remodel with new KraftMaid cabinetry is a different budget entirely. Here’s how our installed pricing breaks down.
| Scope | Installed Price Range (Antioch) |
|---|---|
| Full kitchen remodel with KraftMaid cabinetry | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation (Cambria, Silestone) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range on a full remodel is cabinet line and door style, layout changes (moving a sink or range means plumbing and electrical), and countertop material. We quote parts and labor as separate line items so you can see exactly what a matched KraftMaid hinge or glide costs versus the installation labor, and we give you a written line-item quote with the number you see being the number you pay. Every job is covered by our 730-Day Done Right Promise. Kohl
DIY or Call Us?
You can safely handle a few things yourself. Open the cabinet and read the manufacturer label to identify your series. Measure the hinge cup diameter and drawer box. Tighten a visibly loose hinge screw with a screwdriver, and note which drawer or door is failing so a technician knows exactly what to bring. Where DIY goes wrong is the stripped screw hole that needs a proper repair insert, a hinge pattern that doesn’t match the door you ordered, or a drawer glide swapped for one with the wrong travel length. Those mistakes cost more to undo than the original fix. None of this hardware is dangerous to handle, but a cabinet door that lets go under load is a real hazard in a working kitchen, so get a failed hinge or glide fixed rather than lived with. Call our team at (888) 419-3650 to schedule a free estimate, and a live person answers around the clock.
FAQs
How long do KraftMaid hinges and drawer glides last? A quality hinge or glide typically lasts 10 to 20 years with normal use, and soft-close units tend to fail sooner on the most-used cabinet, like the one under the sink or the silverware drawer. In Antioch’s dry summer heat, wood cabinets move with the seasons, which adds stress to hinges and glides over time. Call (888) 419-3650 for an exact quote on replacement, and estimates are free.
Can a failing hinge or glide be repaired instead of replaced? Sometimes, but a sealed soft-close glide can’t be repaired and a fatigued hinge spring won’t come back, so replacement is usually the honest answer. A stripped screw hole in the cabinet frame, though, can often be repaired with an insert rather than replacing the hinge. Call (888) 419-3650 and we’ll tell you which you’re dealing with.
How long does a KraftMaid hinge or glide swap take? A single hinge or drawer glide swap usually takes under an hour, and a full set across a kitchen is typically a few hours in a single visit. We confirm the part match before we start so there are no return trips. Call (888) 419-3650 to schedule your free estimate.
How do you source the right KraftMaid part for my cabinet? We identify your KraftMaid series from the label inside the cabinet or from measurement, then match the correct OEM hinge or glide to that line. We keep pricing transparent with a written line-item quote so you know the part and labor cost separately. Call (888) 419-3650 to get started.
Whether you need a single hinge matched or a full KraftMaid kitchen remodel in Antioch, we’ll give you straight answers, upfront pricing, and work covered in writing. Our technicians have up to 12 years of experience, and every project is backed by the 730-Day Done Right Promise. Call Groundwork Construction Co. of Antioch at (888) 419-3650 for a free estimate, and ask about 0% financing for 18 months and $1,000 off projects over $10,000. We also work with Cambria, Silestone and Kohler on kitchen and bath projects.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.