Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Antioch Owner’s Guide
We install and service KraftMaid windows and doors in Antioch, and the honest answer on cost is this: most window replacement for a typical Antioch home runs $4,500 to $15,000 installed, while impact-rated windows for the wind-exposed hillside neighborhoods run $8,000 to $25,000. Small parts repairs – a failed sash balance, a worn hinge, a door sweep or weatherstripping – are far less than a full replacement. We’re an independent service provider and not affiliated with KraftMaid, but we know these products and order the correct components for your exact configuration.
Owners in Antioch usually find out something’s wrong the same way. The window that used to glide now sticks halfway up and won’t stay put. A door that closed cleanly in March drags on the threshold by August. Or the draft along the jamb shows up in the form of a higher winter bill and a cold spot you can feel with the back of your hand. None of that means the whole unit has to go. Most of the time it’s a balance, a hinge, a seal, or the hardware set that needs attention.
Key Takeaways
- Window replacement in Antioch: $4,500 – $15,000 installed. Impact windows: $8,000 – $25,000.
- Most first failures are moving parts – balances, hinges, seals – not the glass or the frame.
- Bring your model or serial label info and a photo; that’s the fastest path to the right part.
- Every job backed by our 730-Day Done Right Promise.
Which KraftMaid Models This Applies To
KraftMaid windows and doors span a wide lineup, and the part you need depends on the series, the opening size, and the hardware style. The way to identify yours is to find the manufacturer label. On windows it’s typically on the upper jamb or in the sash channel once you open the unit; on doors it’s usually on the hinge jamb or the top edge. Photograph that label along with a full view of the unit. The model number, size code, and series designation are what let us match a balance, hinge, or seal to the exact unit rather than guessing.
Here’s the compatibility gotcha that trips people up: two KraftMaid windows of the same visible size can take different sash balances if they were built in different production runs. Order the balance by visible length alone and you’ll get one that doesn’t carry the sash weight. The correct approach is to match by the stamp on the existing balance and the label model code together – not by tape measure in the window. The same applies to door hinges: bore spacing and hinge radius vary across lines, and a hinge that looks identical can sit a fraction off and throw the door out of alignment.
On the OEM-versus-aftermarket question, it’s not always about brand loyalty. For balances, hinges, and multi-point door hardware, matching to the KraftMaid spec is usually the right call because the tolerances are tight. For seals, sweeps, weatherstripping, and glazing gaskets, a quality aftermarket equivalent from a reputable supplier does the job and saves money. We tell you which is which before we order. We also service Cambria, Silestone, and Kohler products, so homeowners who are remodeling a space around these windows or doors can keep it all with one contractor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Windows & Doors Is Failing
- The sash won’t stay up or slides down on its own. That’s a worn or broken balance spring. The balance carries the weight of the sash, and once it loses tension the window can’t hold its position.
- A door drags, sticks, or won’t latch flush. Usually a hinge that’s worn, sagging, or sat slightly out of alignment with the bore. Left alone, a dragging door wears the frame and the strike plate.
- You feel a draft along the jamb or the meeting rail. Worn weatherstripping, a flattened sweep, or a failed glazing gasket. In Antioch, the summer heat and dry air age seals faster than most people expect, and the draft shows up as a cold winter room or a whistling edge on wind.
- Condensation or fog between the panes of a window. A failed seal on the insulated glass unit. The moisture is inside the glass assembly, not on the room side, and wiping won’t clear it.
- The window or door is hard to operate, squeaks, or feels loose in the track. Worn rollers, a clogged or damaged track, or hardware that’s worked loose at the fasteners. A loose roller can also drop a sliding door out of plumb over time.
Left unaddressed, any of these gets worse. A dragging door wears the strike side. A failed balance stresses the sash frame. A leaking glazing seal fogs further and eventually compromises the glass unit. Catching it early usually means a parts fix; waiting usually means a bigger one.
Replacement Cost & What’s Included
We price with upfront numbers, no surprises – the figure you see is the figure you pay. For a full window replacement in Antioch, expect $4,500 to $15,000 installed depending on how many units, what type, and the opening conditions. Impact window installation runs $8,000 to $25,000. A parts-and-labor repair on a window or door that just needs a balance, hinge, seal, or hardware set is a much smaller number, and we’ll quote it line by line before we touch anything.
What drives the range: the number of windows and doors, the size and style of each opening, whether it’s an impact-rated unit, existing trim conditions, and whether the opening needs any repair before the new unit goes in. Doors around the home push the project cost up more than windows do. All of that is spelled out in the written estimate. Same day isn’t a promise we make on a full install – nobody replaces a house of windows in an afternoon – but parts repairs often land in a single visit, and we schedule so you know exactly what to expect.
Every job comes with our 730-Day Done Right Promise. If it’s not done right, we make it right – and that’s in writing, on the estimate, not buried in fine print.
| Item | Installed Price Range (Antioch) |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Parts repair (balance, hinge, seal, hardware) | Quoted line by line |
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can check safely yourself. Look at the label and photograph it. Test which sash or door is dragging. Note where the draft is. Feel for a loose hinge or a wandering roller. That’s information that helps us quote the right part, and you’re not risking anything to gather it.
Here’s where DIY goes wrong. Balances are under real tension and releasing one wrong can snap it back into your hand or face. Doors are heavy, and a hinge swap on a door you’re holding in place alone is how back injuries happen. Impact windows and large units are heavy and unforgiving of a slip. If you’re not sure what’s failed, let us diagnose it – a wrong part costs more than a service call. Most jobs are completed in a single visit, and calls are answered by a live person 24/7, so you’re never stuck waiting until Monday. Call (888) 419-3650 for a free estimate.
FAQs
KraftMaid windows generally hold up through the openings themselves for decades, but the moving parts don’t last as long – balances, hinges, seals, and weatherstripping wear in five to fifteen years depending on exposure. In Antioch’s dry, hot summers, seals and gaskets age faster than in milder climates, so drafts and fogging often show up well before the window itself is a problem. Call (888) 419-3650 for an honest read on whether it’s time to repair or replace.
Yes, often. A sash balance, hinge, seal, or hardware set can be replaced on its own without touching the window or door itself. That’s the cheapest route and usually keeps the original unit intact for years more. Once the glass seal has failed on an insulated unit or the frame is cracked, replacement makes more sense. We’ll tell you which is which and quote both if it’s close.
A parts repair on a single window or door typically happens in one visit. A full window replacement depends on how many units you’re doing – a handful of windows may be scheduled across a day or two, while a whole-home job runs longer. We give you the schedule up front so there are no surprises on the calendar.
We match parts to your exact model by the label code and the existing hardware stamp, then order the correct balance, hinge, seal, or hardware set from suppliers who carry the KraftMaid spec. We don’t claim to stock KraftMaid parts locally or carry them on a truck, so we confirm the part against your model before ordering rather than hoping a generic one fits. That’s how you get the right part the first time. Call (888) 419-3650 with your label info and we’ll quote it.
Get Your KraftMaid Windows & Doors Fixed in Antioch
If a window or door in your Antioch home is sticking, drafting, fogging, or dragging, don’t let it wait until it turns into a bigger job. We’re the full-scope construction partner for homeowners who refuse to gamble on their biggest investment, and that includes the details most contractors skip – like tracking down the right part instead of swapping the whole unit. Our technicians have up to 12 years of experience, arrive background-checked and uniformed, and every job is backed by our 730-Day Done Right Promise and our upfront pricing with no surprises. Right now we’re offering $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 419-3650 to schedule your free estimate – a live person answers 24/7.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.