Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Antioch Owner’s Guide
Wellborn bathroom remodeling is spec-built, and the parts inside it wear out on a schedule. A full Wellborn bathroom remodel in Antioch runs $9000 – $28000, and smaller scope work such as a vanity or shower refresh lands between $5000 – $12000. We work on Wellborn cabinetry and vanity systems every week across Antioch, matching the right hinge, drawer guide, or replacement component to the exact line and series.
Owners usually find the failure the same way: a vanity drawer that sticks in the morning humidity, a cabinet door that sags and won’t stay shut, or a hinge plate that has torn out of the box and won’t hold a screw anymore. In our experience, the discovery almost always happens mid-routine, which is why the call usually starts with “can you match this part?” rather than “how much for a remodel?”
Key Takeaways:
- Wellborn bathroom cabinetry and vanity parts are matched by series, not by look.
- Antioch’s wet winters and dry summers age hardware faster than the cabinets themselves.
- We install Wellborn-compatible parts and full bathroom remodels across Antioch.
- Live person answers every call at (888) 419-3650, 24/7.
Which Wellborn Models This Applies To
Wellborn builds multiple cabinet series and finish lines, and the hardware inside them is not universal. A drawer guide spec’d for one series won’t fit another series without also swapping the box, and a soft-close hinge from one line won’t retrofit cleanly to a door from a different one. Matching the part starts with matching the cabinet, not the photo on the hinge.
Here’s how we identify the right part in the field:
- Series label: Wellborn typically places a series and finish identifier on the inside of the cabinet box, often on the back wall of a base cabinet or behind a drawer. Pull a drawer and check.
- Door or drawer front measurement: Measure the exact overlay and thickness. A 3/4″ door with a full overlay takes a different hinge than a 3/4″ door with a partial overlay.
- Drawer box dimensions: Length, width, and height on the box itself, not the front.
- Hinge stamp: Most hinges carry a manufacturer stamp and model number on the plate.
On OEM versus aftermarket for Wellborn specifically: OEM parts are the safe match when the cabinet is under any warranty consideration or when the line has a distinctive hinge cup pattern. A quality aftermarket equivalent works fine in many applications, especially for drawer guides and basic hinges where the specs are standard. We install both and will tell you honestly which one your cabinet actually needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Bathroom Remodeling Is Failing
Hardware in a bathroom fails faster than in a kitchen, because the environment is harsher. Antioch bathrooms see high humidity from daily showers and cooler inland nights that push moisture into cabinet interiors. Here’s what we see:
- Door sag and drag. The top hinge has loosened or a hinge screw has stripped its hole. Usually the cabinet box, not the door, is the source.
- Drawer that sticks or grinds. The guide has worn through its roller or the track has collected grit. Common on vanity drawers under a sink where humidity is highest.
- Soft-close no longer closing soft. The damper inside the hinge has failed. It’s a small part, and it’s not a sign the cabinet is bad.
- Hinge plate torn from the box. Water intrusion or a stripped screw hole has enlarged the mounting hole. Often repairable with an insert, sometimes not.
- Vanity door that won’t stay aligned. The cam or plate has worked loose over years of use and seasonal wood movement. Antioch’s dry summer months open cabinet joints slightly, and the wet winters close them again.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full bathroom remodel pricing in Antioch runs $9000 – $28000. A small bathroom remodel with limited scope runs $5000 – $12000. Individual component work is more targeted:
- Bathroom vanity installation (including cabinet and top): $800 – $3000
- Walk-in shower installation: $4500 – $12000
- Tub-to-shower conversion: $3500 – $10000
- Shower replacement: $3000 – $8500
What drives the range: the size of the bathroom, whether the layout is changing, whether plumbing needs to move, tile selection, and how many fixtures are being replaced. We quote the whole job in writing before work starts. The number we give you at the estimate is the number you pay – no change-order creep unless you ask for scope that wasn’t in the original plan. All work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Call (888) 419-3650 to schedule a free project estimate and design consult.
DIY or Call Us?
Honest split: if the hinge plate has worked loose and the screw hole is intact, you can tighten it with a screwdriver. If a soft-close damper has gone stiff on a hinged door, that’s often a simple swap if you have the exact hinge model. Measuring and identifying the part is also fine for you to do.
Where DIY goes wrong: stripped hinge holes look fixable but aren’t always. If you drill, glue, or fill the hole wrong, you can weaken the cabinet box itself. Drawer guide replacements across the wrong track system can also damage the mounting points. And if the issue is plumbing-related – a vanity that’s leaking into the cabinet below and swelling the box – that’s not a hardware problem, that’s a water problem, and it needs to be diagnosed before we match any parts. If you’re not certain which issue you’re looking at, call us. A live person answers 24/7 at (888) 419-3650.
FAQs
Soft-close hinges typically last 8 to 12 years in a bathroom environment; drawer guides last 10 to 15 years. Antioch’s humidity cycle – wet winters, dry summers – puts cabinet hardware on the shorter end of that range compared to a dry inland climate.
Often, yes. Stripped hinge holes can frequently be repaired with a screw insert rated for the cabinet material. Worn-out drawer guides and failed soft-close dampers are almost always replace-only. We’ll tell you which yours is during the estimate.
Most single-door or single-drawer hardware swaps are done in a single visit. A full vanity replacement typically takes half a day to a full day depending on plumbing and countertop scope. Larger bathroom work is scheduled over multiple visits.
We match the part to your specific cabinet series and overlay by identifying the cabinet, reading the hinge stamp, and measuring overlay and box dimensions. We don’t claim to stock Wellborn parts – we source the exact match for your cabinet line and finish. Call (888) 419-3650 for a free estimate.
We’re an independent service provider and not affiliated with Wellborn. We also install and service KraftMaid, Cambria, and Silestone products across Antioch.
If you’re planning a Wellborn bathroom remodel in Antioch, or just need a failed part matched and installed correctly, call Groundwork Construction Co. of Antioch at (888) 419-3650 for a free estimate. Live person, 24/7. We stand behind every job with our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.