Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Antioch Owner’s Guide
Wellborn-compatible driveway and paver systems installed in Antioch typically run $7,000 – $18,000 for a paver driveway, $3,500 – $11,000 for a paver patio, and $250 – $700 for a reseal, and most residential installs are completed in a single visit or two. We source the correct Wellborn-series profile or paver unit, pull the required permits through the City of Antioch, and back the finished work with our 730-Day Done Right Promise. Groundwork Construction Co. of Antioch is an independent service provider and is not affiliated with Wellborn.
Owners usually find out something’s wrong in one of two ways. Either a driveway edge has started to shift and separate after a wet winter, or a paver face has spalled and the surface is shedding grit every time a car rolls over it. By the time the joint sand washes out twice in one rainy season, the base has usually already moved and the fix moves from a topcoat to a rebuild. In Antioch, we see this most often on driveways that were laid over compacted fill without a proper aggregate base, which is common in the newer subdivisions along the Highway 4 corridor.
Which Wellborn Models This Applies To
Wellborn paver and driveway products are specified by profile, thickness, and finish line rather than a single model number. For a driveway, the unit is almost always a 60mm or 80mm interlocking concrete paver; patios and walkways can use the 60mm profile, and the 80mm is the driveway-grade spec that handles vehicle load. What you need to match is the exact face profile (the shape stamped into the surface), the color lot, and the dimensional module, because a mismatched lot will read as a different shade in sun and shadow even if the profile is identical.
To identify the right part, check the underside of a loose paver for a stamped manufacturer mark and look for the original project documentation, which lists the product line and color. Measure a single unit cold-joint to cold-joint and confirm thickness with a tape at the edge, because two profiles can look alike on top and differ by 4 – 6mm underneath. On the OEM-versus-aftermarket call: matching the actual Wellborn profile and lot is worth it when you’re patching a visible field or edge course, while a compatible aftermarket paver is fine for a hidden soldier course under a fence line or a corner that will be covered by landscaping. Color-lot drift is the classic gotcha: a “close enough” color from a different production run will stand out once it weathers, and you can’t undo that by sealing it. Choose quality, not just availability.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
- Edge settling and visible drop-off. The paver field has dropped along the driveway apron or garage approach because the base aggregate wasn’t compacted in lifts. Once the edge loses support, the interlock fails and individual units start to rock.
- Joint sand washing out after rain. Repeated loss of joint sand means water is moving through the surface instead of draining off it. Underlying cause is usually a grade or slope issue, not a sand problem, and re-sanding alone won’t hold.
- Spalling and surface flaking on the paver face. Freeze-thaw cycles are mild in Antioch, but our wet winters and summer heat put real stress on a low-density unit or a poorly cured lot. Flaking exposes aggregate and accelerates wear under tire traffic.
- Widespread efflorescence that won’t clear. White mineral bloom that keeps returning after cleaning points to moisture trapped in the base or units. That’s a drainage or base-moisture problem that will keep coming back until the source is fixed.
- Rutting, rocking, or a hollow sound underfoot. A hollow tap means the paver has lost contact with the bedding layer. In Antioch, we regularly see spring failures on driveways laid over expansive clay fill that swells and shrinks with the wet-dry season, which is why base prep matters more here than in drier inland markets.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Antioch runs $7,000 – $18,000 for a paver driveway, $4,500 – $12,000 for a concrete driveway, $3,500 – $9,000 for asphalt paving, $5,000 – $14,000 for a full driveway replacement, $3,500 – $11,000 for a paver patio, and $250 – $700 for a reseal. What drives the range is square footage, base depth and soil conditions, whether the old surface gets demoed and hauled, edge restraint and drainage work, and whether you’re matching an existing Wellborn lot or installing a full new field. Hardscaping is heavy work, so labor is a real share of the number, not padding.
You get a written, line-item quote before anyone shows up: parts, labor, demo, haul-away, and permits broken out so you can compare bids honestly. The number you see is the number you pay. And the work is covered by our 730-Day Done Right Promise, so if a paver shifts or a joint fails inside that window because of how it was installed, we make it right.
DIY or Call Us?
You can safely handle the diagnostics. Tap across the field to find hollow units, photograph the spalled faces, measure your existing units, and check whether the joint sand is washing toward the street or pooling at the garage apron. That last check tells you whether you have a drainage problem or a surface problem, which is the difference between a $300 reseal and a base rebuild.
Where DIY goes wrong on a paver driveway is in the base and the edges. Running a plate compactor over an under-prepared subgrade looks fine in July and fails in February, and this is physical, load-bearing work with real injury risk if a stack of pavers or a demo edge gets away from you. Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked, and calls are answered by a live person 24/7. Call (888) 419-3650 for a free estimate.
FAQs
How long do Wellborn pavers last in Antioch? A properly installed Wellborn paver driveway should hold 25 – 50 years, while a paver on an under-built base can fail in as little as 5 – 10 wet seasons. Antioch’s clay soils and winter rain put the base prep to the test, so installation quality matters more than the paver itself. Call (888) 419-3650 for an exact quote: estimates are free.
Can a failing driveway or paver be repaired instead of replaced? Often yes. Single-unit replacement and spot re-basing are real options when the damage is isolated, and a reseal in the $250 – $700 range can buy time on a surface that’s sound underneath. If the failing units span a whole wheel path or the edge has dropped out, patching just moves the problem two feet down the drive. Call (888) 419-3650 and we’ll tell you which one you’re looking at.
How long does the swap or install take? A reseal is usually a single visit, spot paver replacement is typically one day, and a full paver driveway install runs two to four days depending on square footage, demo, and base depth. Wellborn or matching-lot sourcing can add lead time, and we’ll give you the real timeline in your written quote instead of guessing on the phone. Call (888) 419-3650 to schedule your free estimate.
How do you source the Wellborn part? We identify the profile, thickness, and color lot first, then source through Authorized Wellborn distribution channels or a confirmed matching lot, and we tell you in writing when an exact match isn’t available before you commit. We don’t claim to stock parts or carry pavers on a truck; every project is sourced to your specific driveway. We also work with KraftMaid, Cambria, and Silestone on other trade scopes. Call (888) 419-3650 for a free estimate.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.