A Groundwork company - serving Antioch, CA

Schluter Kitchen Remodeling in Antioch, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Kitchen Remodeling: The Antioch Owner’s Guide

We install Schluter-compatible kitchen remodeling in Antioch, and a full kitchen project typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material and square footage. Smaller scopes like a backsplash or island replacement land well below that. There’s no such thing as a same-day kitchen remodel, so expect a scheduled start after your free design consult, not a truck at the curb tomorrow.

Call (888) 419-3650

Homeowners usually find us after a different kind of failure. Schluter products are the concealed layer under your tile and counter, and when one lets go you don’t see the part fail. You see a hairline crack working across the backsplash grout. A tile edge lifts near the sink. A dark line creeps along the floor-to-cabinet joint after a winter of rain. That’s usually a waterproofing membrane, an edge profile or a bonding flange telling you it’s done its job and something under it has shifted.

Which Schluter Models This Applies To

Schluter isn’t a single product, it’s a family, and knowing which piece you’re working with changes everything about the repair. The common ones in Antioch kitchens are Kerdi and Kerdi-Band for waterproofing, Ditra and Ditra-Heat for floor uncoupling over a slab or wood subfloor, Kerdi-Board for shower and wall backer, and the edge and transition profiles like Schluter-RENO-U, SCHIENE and JOLLY that finish tile-to-drywall and tile-to-floor lines. Countertop and backsplash work often involves Kerdi-Board behind the tile and a trimmed profile at the exposed edge.

To identify what you have, look at the labels on any leftover packaging or the printed marking on the membrane fleece, then measure. Ditra and Ditra-Heat come in 1/8″ and 5/16″ thicknesses, and the gap they create at a threshold or cabinet toe kick is the tell if the print has worn off. Kerdi-Band runs in standard 5″ and 7″ widths. Bring a photo and a measurement and we can usually match it before we arrive.

On OEM versus aftermarket: for waterproofing and uncoupling membranes, we install genuine Schluter because the assembly is a tested system and mixing brands voids that test. For edge profiles and trim, a quality equivalent from a brand like Schluter’s own SCHIENE line or a matching anodized aluminum profile is fine as long as the height and finish match your existing run. We’re an independent service provider, not affiliated with Schluter, so we’ll tell you honestly when a genuine part is worth the cost and when it isn’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Kitchen Remodeling Is Failing

Here’s what actually shows up in Antioch kitchens, and what’s usually behind it.

  • Grout cracks along the backsplash or a wall seam. The membrane beneath has lost adhesion, often because the substrate moved or moisture got behind an unsealed edge. A crack that returns after re-grouting is the giveaway.
  • Hollow-sounding tile when you tap it. Tapping with a knuckle and hearing a dull thud instead of a solid click means the thin-set has debonded from the uncoupling layer. This is the earliest stage and the cheapest to catch.
  • Lifted or loose edge profiles. When a RENO-U or SCHIENE strip pops off the tile edge, the screw-fastened trim has lost its bite or the adhesive behind it failed. Small enough to fix, and a sign the surrounding tile needs a look.
  • Damp or discolored caulk at the floor-wall joint. In Antioch’s wet winters, water that gets past a failed Kerdi lap shows as dark caulk and a musty smell long before visible damage. That joint is where we find most leaks.
  • Lippage on a Ditra floor near the island. If tile edges sit uneven along the traffic path by the island, the uncoupling membrane may have compressed or separated from the subfloor. Heavy foot traffic on a poorly bonded floor brings this on faster than most owners expect.

Replacement Cost & What’s Included

Installed pricing for the work in Antioch depends on how much has to come apart before anything goes back down.

Scope Installed range (Antioch)
Backsplash repair / re-tile with membrane $800 – $2,500
Kitchen island install or rebuild $3,000 – $10,000
Countertop installation $2,000 – $6,500
Cabinet installation $4,000 – $13,000
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000

The range is driven by square footage, whether the failed membrane sits behind full tile walls, and how much of the counter and cabinetry has to come out to get to a sound substrate. We price parts and labor separately with a written line-item quote, so you see exactly what the Schluter material costs versus the install. Every project carries our 730-Day Done Right Promise, and we pull the permits the work requires.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this is safe to check yourself. You can tap for hollow tile, look for cracked grout, photograph the membrane labels, and measure the profile depth at a threshold. That work costs nothing and gives us a running start on the quote.

Where it goes wrong is re-waterproofing. Getting Kerdi laps right, sealing the flange, and setting thin-set at the correct coverage over a slab aren’t forgiving tasks, and a repeat leak behind full-height tile means tearing the wall out twice. It’s not a danger the way high-tension or electrical work is, but it is a job where doing it halfway costs more than starting over. If you’ve already re-grouted a crack and watched it come back, that’s your answer. Call us to schedule a free estimate and we’ll tell you honestly whether you’re looking at a repair or a rebuild.

FAQs

How long does a Schluter waterproofing membrane last in a kitchen? A correctly installed Schluter assembly should hold up 20 to 30 years in an interior kitchen with normal humidity. The weak point is rarely the membrane itself. It’s the seals, laps and penetrations where moisture starts finding a path.

Can a failed membrane be repaired instead of replaced? Often, yes. A localized debond or a single cracked seam can be cut out and patched with Kerdi-Band and a proper thin-set without touching the whole wall. Whether that’s realistic depends on how much area is affected and whether the leak has spread behind the tile.

How long does the swap take? A backsplash or edge profile repair usually finishes in one to two days, including dry time. A membrane that’s failed behind full tile walls in a larger remodel runs several days to a couple of weeks. We give you a real timeline before we start.

How do you source the part? We match your existing Schluter series and thickness from the original labels or measurements, then order the specific material for your job. We don’t carry parts on a truck, so everything is ordered and confirmed before the install date. Call (888) 419-3650 for an exact part match and a free quote.

Ready to Get Started?

If a cracked seam, a loose profile or a damp joint near your cabinets has you wondering what’s underneath, it’s worth finding out before it spreads. We handle Schluter-backed kitchen work across Antioch, along with KraftMaid, Cambria and Silestone for the cabinet and counter side of the project. Pricing is upfront, the work is backed in writing for 730 days, and a live person answers 24/7. Call Groundwork Construction Co. of Antioch at (888) 419-3650 to schedule your free estimate.

Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch