A Groundwork company - serving Antioch, CA
S

Sterling Bathroom Remodeling in Antioch, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Bathroom Remodeling: The Antioch Owner’s Guide

We install Sterling-compatible bathroom remodeling in Antioch at a typical installed cost of $9,000 – $28,000, depending on whether you’re refreshing a hall bath or rebuilding a primary suite. When a Sterling fixture or finish starts to fail, most Antioch homeowners notice it the same way: a hairline crack spreading across the shower pan, a vanity top that’s chipped at the edge, or caulk that won’t stay sealed no matter how many times it’s redone. That’s usually the moment a small repair turns into a full remodel decision, and it’s worth knowing the numbers before you commit.

Call (888) 419-3650

Which Sterling Models This Applies To

Sterling makes bathroom fixtures across several lines, and the compatibility question matters most for shower pans, tub surrounds, and vanity top assemblies. The model number is stamped on a label on the underside of the pan or the back of the surround panel, and it’s also cast into the unit itself on most series. Write it down before you call anyone. Sterling’s pans and surrounds are sized to their own spec, so a generic replacement pan from a box store often won’t line up with the existing drain rough-in or the wall studs the surround is anchored to. That measurement mismatch is where most DIY swaps go sideways.

On the OEM-versus-aftermarket decision: for a Sterling surround panel or decorative finish, aftermarket equivalents rarely match the profile exactly, and the visible gap is what homeowners notice first. For a standard shower valve cartridge or drain assembly, a quality aftermarket part is fine and we’ll say so. We’re an independent service provider, not affiliated with Sterling, so we match your model to the right part without a brand agenda. We also work with KraftMaid, Cambria, and Silestone when a remodel moves past fixtures into cabinetry and counters.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Bathroom Remodeling Is Failing

  • Hairline cracks at the shower pan drain. Flex from an unsupported subfloor, common in older Antioch homes where the floor joists have settled. A crack here leaks into the ceiling below before you see it from above.
  • Chipping or delamination on the vanity top edge. Usually years of water sitting at an unsealed seam. Once the laminate or solid-surface layer lifts, sealing it is a temporary fix at best.
  • Caulk joints that fail every season. Antioch’s hot, dry summers and wet winters move the framing enough that a rigid caulk line cracks. Repeated failure points to a joint that needs backing rod, not more caulk.
  • A shower surround pulling away from the wall. The adhesive behind the panel has let go, often because moisture got behind it. Left alone, it’s a mold problem inside the wall cavity.
  • Water staining on the ceiling below the bathroom. The clearest sign a pan or drain connection has failed. This one moves from “schedule it” to “address it now.”
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A bathroom remodel in Antioch runs $9,000 – $28,000 installed, and a smaller hall bath lands in the $5,000 – $12,000 range. If you’re replacing just the shower assembly, a shower replacement is $3,000 – $8,500, a walk-in shower installation is $4,500 – $12,000, and a tub-to-shower conversion is $3,500 – $10,000. A vanity install alone is $800 – $3,000 when the rest of the room is staying put.

What drives the range is what’s behind the wall: whether the subfloor needs repair, whether the drain rough-in lines up with a new pan, and whether you’re keeping the existing tile. We give you a written line-item quote so the parts and the labor are both visible. Every install is covered by our 730-Day Done Right Promise, and pricing is upfront with no change orders after the work starts.

DIY or Call Us?

You can safely pull the model label, measure the pan and the drain location, and check whether the caulk failure is surface-level or hiding water damage. That’s useful information to have ready. Where DIY goes wrong is the part that involves cutting out a pan, re-setting a drain, and re-flashing the waterproofing behind the surround. A shower pan that isn’t set level or isn’t tied into the waterproofing will leak, and the leak shows up months later in the room below.

Our technicians have up to 12 years of experience on this work, and they’re background-checked and arrive in uniform. If you’re past the point of a quick fix, call (888) 419-3650 for a free estimate. We answer live, 24/7, so you’re not waiting on a callback.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch