A Groundwork company - serving Antioch, CA

Atlas Kitchen Remodeling in Antioch, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Kitchen Remodeling: The Antioch Owner’s Guide

If you own an Atlas kitchen and a component has failed, we install Atlas-compatible kitchen remodeling components throughout Antioch, and a full kitchen remodel here typically runs $14,000 – $45,000 with cabinet installation alone at $4,000 – $13,000. Most Antioch owners notice the problem the same way: a cabinet door that won’t stay shut, a drawer that grinds halfway out, or a countertop seam that’s started to catch a fingernail. We’re Groundwork Construction Co. of Antioch, an independent service provider, not affiliated with Atlas, and we’ve handled enough of these kitchens to know which failures are cosmetic and which mean the hardware is done. The good news is most single-part problems cost far less than a remodel, and we’ll tell you honestly which one you’re facing.

Call (888) 419-3650

Key Takeaways

  • A full Atlas kitchen remodel in Antioch runs $14,000 – $45,000; single-part replacements cost a fraction of that.
  • Cabinet hardware and hinges fail first in Contra Costa County’s dry summers and humid winters.
  • We install Atlas-compatible parts, not Atlas-branded OEM parts, and we source them to your measurements.
  • Most hardware and door swaps finish in a single visit.
  • Our technicians have up to 12 years of experience and every job is covered by the 730-Day Done Right Promise.

Which Atlas Models This Applies To

Atlas cabinetry shows up across a wide range of Antioch homes, and the parts that fail are rarely interchangeable between lines. The first thing we do on a call is identify your specific box. Look inside a cabinet door for a manufacturer label or a series code stamped on the back panel or the inside of the face frame. If there’s no label, we measure the door overlay and the hinge cup bore (the round hole the hinge sits in) because those two numbers tell us which hinge platform your cabinet uses. Standard European-style concealed hinges use a 35mm cup bore, but Atlas used a few different overlay patterns over the years, and a hinge that looks identical on the shelf can sit your door 1/8 inch off if it’s the wrong overlay.

Here’s the decision most owners have to make: OEM or aftermarket. Atlas-branded replacement parts, where you can still find them, keep the original look exactly. Quality aftermarket hardware from established hinge and slide makers often outlasts the original part and costs less. For a door or drawer front, you’ll want to match the finish and profile, which usually means going back to the series spec. We don’t claim to stock Atlas parts and we don’t carry a parts inventory on a truck. We identify your model, quote the right part, and bring it to the job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Kitchen Remodeling Is Failing

  • A cabinet door sags or won’t stay closed. That’s almost always a worn hinge or a stripped screw hole in the frame, not the door itself. The hinge loses tension, or the mounting screws have wallowed out the soft wood behind them.
  • Drawers grind or pull out crooked. The slide has lost a ball bearing or the track has bent. Undermount slides fail this way after years of a heavy pot drawer being overloaded. Once the race is gone, the drawer will keep jumping the track.
  • A countertop seam opens or a corner lifts. In Antioch’s hot, dry summers, laminate and solid-surface seams expand and contract, and a poorly bonded seam can separate. A lifted section near the sink often points to moisture getting under the edge.
  • Caulk lines at the backsplash crack or pull away. This is the most common kitchen failure we see in Antioch, and it’s usually a movement issue, not a leak. The gap between backsplash and counter flexes and the old caulk gives out, opening a channel where water can get behind the counter.
  • Cabinet boxes separate at the joints or the toe kick pulls loose. This happens when the original install didn’t anchor the boxes to studs properly or when particleboard swells from a past leak. It’s a structural fix, not a cosmetic one.

Replacement Cost & What’s Included

Cost depends on how much of the kitchen the failure touches. A full Atlas-compatible kitchen remodel in Antioch runs $14,000 – $45,000, but you may only need a piece of it. Here’s how the line items break down for the most common jobs:

Scope Installed Price Range
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000
Full kitchen remodel $14,000 – $45,000

What drives the range is door and drawer count, counter material (we install Cambria, Silestone and other trusted brands), and whether the boxes themselves need repair or full replacement. We quote the part plus labor as a line item so you see exactly what you’re paying for. Upfront pricing, no surprises: the number you see is the number you pay. Every install is covered by our 730-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely do a few checks yourself. Open and close every door and drawer and note which ones stick or sag. Look at the hinge cup and count the screw holes. Run a finger along the counter seam and backsplash caulk line to feel for gaps. Photograph your cabinet labels so we can match the part before we arrive.

Where DIY goes wrong: cabinet boxes and countertops aren’t dangerous, but they’re heavy and unforgiving. A hood or upper cabinet that comes loose mid-removal, a countertop that shifts off level, or a stripped hinge screw that needs a proper insert repair are the spots where a weekend job turns into a two-week one. And a water line to the refrigerator or a gas line behind the range is not a DIY project, period. We’d rather you call us than hurt yourself. Call (888) 419-3650 and we’ll schedule a free estimate in Antioch.

FAQs

Get a Free Estimate on Your Atlas Kitchen

If your Atlas kitchen needs a part replaced or the whole layout retooled, we’ll come out, look at the failure, and give you a written line-item quote at no cost. The consultation and design consult are free. We don’t pressure you into a full remodel when a hinge and a hinge plate is what you actually need. Call Groundwork Construction Co. of Antioch at (888) 419-3650 to schedule your free estimate today. Financing is available at 0% for 18 months, and we take $1,000 off projects over $10,000.

Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch