Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The Antioch Owner’s Guide
Bathroom remodeling with Boral products in Antioch typically runs $9,000 – $28,000 installed, with smaller scope projects landing between $5,000 – $12,000. That range covers tear-out, waterproofing, tile, fixtures, and finish work on a full bath. Groundwork Construction Co. of Antioch is an independent service provider and is not affiliated with Boral.
Owners usually discover a Boral material problem the same way: a hairline crack in a tile starts spreading after a wet winter, or a grout line near the shower pan turns dark and won’t scrub clean. Boral’s product lines are built for durability, but Antioch’s hard water and the seasonal swing between wet winters and dry, hot summers put real stress on bathroom surfaces. When the failure shows up, the question isn’t whether to fix it. It’s which part, which grade, and who installs it right the first time.
Key takeaways:
- Installed Boral bathroom remodel cost in Antioch: $9,000 – $28,000.
- Most Boral failures show up as cracked tile, failed grout, or water intrusion behind the wall.
- We source the correct Boral product for your model, pull permitting where required, and back the work with the 730-Day Done Right Promise.
- Call (888) 419-3650 for a free estimate. Live person, 24/7.
Which Boral Models This Applies To
Boral’s bathroom-facing product lines center on tile, stone, and cultured marble, plus the shower pans and vanity tops that pair with those surfaces. If your bathroom has Boral tile on the floor or walls, or a Boral cultured marble vanity top or shower surround, this page applies. Labels and packaging rarely survive a remodel, so the reliable starting point is physical identification: tile dimensions (Boral runs common formats like 12×12, 12×24, and 18×18), surface finish (matte, polished, honed), and shade name on the original spec sheet if you have it.
On the OEM-versus-aftermarket decision: for a true Boral match, the product number matters more than the brand name. Boral discontinues shades and formats periodically, and a “close enough” aftermarket tile in the same dimensions will often read as a slight color and sheen mismatch under bathroom lighting. If an exact Boral match isn’t available for a repair, the honest options are to re-tile the whole field or to shift to a complementary tile at a natural break line. We source through Boral’s distribution channels and independent suppliers, and we’re upfront when a discontinued shade means changing scope.
One compatibility gotcha worth knowing: Boral tile thickness varies by series, and a 3/8″ product won’t sit flush against existing 5/16″ material at a transition without proper substrate work. Measure before you buy anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
- Hairline cracks spreading across tile or grout: Often a sign of substrate movement or insufficient deflection under the tile. Antioch homes on expansive clay soils see this more than owners expect.
- Grout that darkens and won’t clean: Usually water getting behind the tile, not topical staining. Sealed Boral tile doesn’t absorb on the surface – if it’s dark, the moisture is coming from the back side.
- Loose or hollow-sounding tile: The thinset bond has failed. Tap a suspected area with a plastic handle; a hollow sound means the tile is no longer bonded and will eventually pop.
- Cultured marble vanity top crazing or yellowing: UV exposure through an unshaded window and years of caustic cleaners degrade the gel coat. Once crazing starts, refinishing buys time but won’t stop it.
- Shower pan flex or a soft spot near the drain: The pan has lost structural support or the waterproofing membrane has failed. This is the highest-priority symptom because water is already reaching the framing.
In Antioch, we regularly see tile failures near exterior walls where the temperature differential across the wall assembly is widest. The tile itself is rarely the problem. What’s behind it is.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Boral bathroom work in Antioch breaks down by scope. Our pricing is upfront and the number you see is the number you pay:
| Scope | Installed Range |
|---|---|
| Full bathroom remodel with Boral tile and fixtures | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What drives you toward the top of a range: tile complexity (large-format tile and intricate patterns take longer and require tighter substrate prep), plumbing relocations, and whether the substrate is sound or needs repair once we open the wall. Every quote we write is line-item, so you see material cost, labor, and any permitting separately. No change orders from a vague base bid. The whole job is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
There’s a short list of things you can safely check yourself: confirm the tile dimensions and look for a Boral label on a leftover box, tap suspect tile for hollow spots, and note where water is pooling or darkening. Photograph everything before you touch it.
Where it stops being a DIY call: any sign of water behind the tile, a soft shower pan, or a substrate that’s moving. Opening that wall without a plan to re-waterproof correctly will turn a small failure into a framing and mold problem. And a bathroom that’s been leaking slowly behind a wall for two years has a good chance of needing more than cosmetic work once it’s open. Our technicians have up to 12 years of experience with tile, waterproofing, and bathroom systems, and we pull the permits. If permitting or code compliance is part of your job, we handle that entirely.
Call (888) 419-3650 to schedule a free estimate. Live person, 24/7.
FAQs
Properly installed Boral tile can last 30+ years. The variable is what’s behind it. Boral tile on a correctly waterproofed, deflection-compliant substrate installed to spec in Antioch holds up for decades. Tile that’s bonded to a moving or under-prepped substrate develops cracks and loose tiles in the first few years.
Sometimes, yes. A single cracked tile can often be replaced if the bond below is intact and a matching product is available. Grout near the shower pan that’s failing can be cut out, cleaned, and re-grouted if the waterproofing behind it is sound. Once water is behind the tile or the shower pan flexes, replacement of the affected area is usually cheaper than repeated repairs.
A spot tile repair is often a single-day job. A full bathroom remodel is typically two to four weeks depending on scope and permitting timeline. Most smaller repairs are completed in a single visit.
We source through Boral’s distribution channels and independent suppliers, matching your existing product number or shade name where it’s still available. If a discontinued Boral product no longer exists, we’ll tell you at the estimate and lay out the realistic replacement options, not after we’ve torn out the tile.
Call (888) 419-3650 for a free estimate and design consult. We also service KraftMaid, Cambria, and Silestone for kitchen and countertop work across Antioch. Upfront pricing, no surprises, and the work backed in writing for 730 days. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.