Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Antioch Owner’s Guide
We build Boral-spec home additions and ADUs across Antioch, and installed projects here typically run $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, depending on square footage, foundation work, and finish level. Planning and permitting is a weeks-to-months process, not a same-day swap, and we quote it that way. Most Antioch owners don’t go looking for this page until something has already given them a reason to: a settled slab under a new addition, moisture wicking up through the base of a Boral-clad wall, or a contractor’s bid that can’t explain why the framing spec matters more than the siding color. When that first doubt shows up, the questions are always the same: correct Boral system for the structure, honest price, and a written guarantee on the workmanship.
Which Boral Models This Applies To
Boral makes a broad range of exterior cladding, trim, and masonry products, and the right part number depends on which system is on your wall or floor plan, not on a single catalog number. The most common cladding families we see on Antioch additions are Boral’s poly-ash and engineered siding lines, plus Boral trim profiles that must match the wall system you’re pairing them with. Compatibility is where owners get burned: a Boral trim profile sized for a 3/4-inch wall assembly won’t sit flush on a 5/8-inch sheathed addition without adjustment, and mixing Boral cladding with a non-Boral trim of the same nominal width can leave a visible lip at every seam. You identify the correct part by matching the profile stamped on the back of the board or trim, the manufacturer’s label, and the measured thickness of your existing wall – not by eyeballing the color.
On OEM versus aftermarket: Boral parts are OEM, made to a specific spec for a specific system. A generic PVC or composite trim that looks close at the lumberyard is not the same product, and on a permitted addition the inspector will check that the cladding and trim match the approved plans. When a Boral component is discontinued or back-ordered, a quality aftermarket equivalent can sometimes substitute for concealed trim, but exposed cladding should match the manufacturer’s spec. We’re an independent builder, not affiliated with Boral, and we source Boral components through licensed distributors so the label, part, and spec line up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
Boral cladding and trim are durable products, but they don’t fail in isolation – the failure is usually in the assembly behind them. Here’s what we see in Antioch:
- Moisture streaks or staining at the base of a Boral-clad wall. Water is wicking up from a slab or finding a gap in the weather-resistive barrier, and the cladding is hiding it. Fix the drainage, not the paint.
- Visible gaps or a lip where Boral trim meets the wall. The trim profile is the wrong thickness for the wall assembly, or it was installed over an out-of-plane surface. This is a compatibility and installation issue, not a product defect.
- Soft spots or movement when you press on a Boral trim board near a door or window. Behind it is a framing or flashing problem letting moisture in – the trim is the messenger, not the cause.
- Cracks at seams or corners of the cladding on a newer addition. Usually the framing has settled or the cladding was installed tight with no allowance for expansion. The crack tells you the assembly moved.
- Interior moisture, musty smell, or efflorescence near the addition. The wall system isn’t drying out. That’s a flashing, barrier, or ventilation failure under the cladding.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Because Boral failures are almost always assembly failures, the honest job is rarely a single part swap. Here’s how Antioch projects price out:
| Scope | Typical Installed Range |
|---|---|
| Trim or cladding repair (single elevation) | Included in larger project scope |
| Home addition (Boral-spec, mid-range finishes) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What drives the range: square footage, foundation type, whether the wall system needs re-sheathing or just re-cladding, permitting, and finish level. We give upfront pricing, no surprises – a written line-item quote before work starts, and the number you see is the number you pay. All workmanship is covered by our 730-Day Done Right Promise. Most jobs are not one-visit swaps; additions and ADUs run weeks to months, and we schedule them that way.
DIY or Call Us?
You can safely read the label, photograph the board profile, and measure the thickness of your existing wall – that information helps us source the correct Boral component. What you shouldn’t DIY is the wall assembly itself. Cladding and trim sit over structural framing, weather-resistive barriers, and flashing, and getting the layering wrong traps moisture in a wall that can rot for years before you see it. Additions and ADUs also require permits and inspections in Antioch, and a homeowner-installed assembly that fails inspection costs more to fix than to do right. When a Boral-clad wall is showing staining, gaps, or cracks, get it looked at by someone who can open it up safely. Call (888) 419-3650 – the estimate is free, and we’ll tell you straight whether it’s a trim fix or a wall rebuild.
FAQs
How long does Boral cladding and trim last in Antioch? Twenty to forty years is a reasonable expectation for Boral cladding when the wall assembly, flashing, and drainage behind it are done right. The cladding often outlasts the assembly beneath it, which is why we inspect what’s behind the board before quoting a replacement.
Can I repair the Boral part instead of replacing it? Sometimes yes, if the damage is isolated to one trim board or a single section of cladding with a sound wall behind it. But if the failure traces to the barrier or framing, a patch over the visible symptom just hides the problem. Call (888) 419-3650 and we’ll tell you which one you’re looking at.
How long does an addition or ADU take? A home addition in Antioch typically runs several weeks to a few months; a full ADU runs longer, often several months to most of a year, because of permitting, foundation, and inspection schedules. This is a planned construction project, not a same-day repair.
How do you source the Boral component? We identify the correct Boral profile and system by the manufacturer’s label, the stamped profile, and measured wall thickness, then order through authorized distributors. If a component is discontinued, we tell you the OEM part is unavailable and show you the aftermarket or revised-spec options in writing. Call (888) 419-3650 for a free estimate.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.