Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Antioch Owner’s Guide
We install CGI-compatible windows and doors for Antioch homeowners, with typical installed pricing from $4,500 to $15,000 for standard replacement and $8,000 to $25,000 for impact-rated units. Parts-level repairs (hardware, hinges, seals, rollers, glazing) run considerably less and most single-unit swaps finish in one visit. Owners usually find us after a symptom shows up first: a door that won’t latch square, fog between panes, a roller that grinds on a sliding unit, or water staining the interior sill after a Delta breeze pushes rain sideways against the glass.
Which CGI Models This Applies To
CGI windows and doors show up across a wide span of Antioch housing stock, from 1970s ranches off G Street to newer builds out toward Prewett Ranch and the Hillcrest corridor. The product line includes aluminum and vinyl sliders, single-hung and double-hung units, patio doors, and impact-rated assemblies built for the wind and debris exposure that comes with living near the Delta. Identifying your exact unit is the first step, and it’s where most homeowners get stuck.
Look for the certification label on the frame or sash. It lists the series, the glass package, and the performance ratings. If the label is gone, we measure the rough opening, the sash dimensions, and the frame profile, then compare against CGI’s spec sheets to match the right part.
OEM vs. quality aftermarket
For weatherstripping, rollers, and glazing, aftermarket equivalents from reputable suppliers often match CGI’s specs at lower cost, and we’ll tell you when that’s the smart call. For structural hardware, impact-rated glass, and anything tied to the unit’s performance rating, OEM is the safer path because the ratings were tested as an assembly. We’re an independent service provider, not affiliated with CGI, so we source by spec, not by brand loyalty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
- Fog or condensation between the panes. The sealed glass unit has lost its seal, letting moisture in. This is a glazing failure, not a cleaning problem.
- A door that drags or won’t latch. Usually a worn hinge, a sagging frame, or a shifted threshold. Left alone, the misalignment stresses the whole assembly.
- Grinding or stiff sliding. Rollers and tracks wear out first on sliders, especially when grit collects in the track. Replace the rollers before the track grooves out.
- Drafts and higher energy bills. Failing weatherstripping or a shrinking seal lets conditioned air escape. Antioch’s summer heat makes this show up fast on the bill.
- Water staining on the interior sill or drywall. This points to a perimeter seal or flashing failure. Catch it early or the damage moves into the wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Antioch depends on unit type, glass package, and how many openings you’re doing. Here’s what our market runs:
| Work | Installed Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
The range moves with unit count, frame material, and impact rating. Each quote is line-itemed: parts, labor, and disposal are separate so you see where the money goes. Upfront pricing means the number you see is the number you pay, and every job carries our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some checking is safe. You can clean and lubricate a track, test a latch, and look for a certification label. What goes wrong is the repair itself. Replacing a sealed glass unit or resetting a door frame requires getting the assembly square and the seal right, and a bad seal is what causes the water damage you were trying to prevent. On impact-rated units, the tested performance rating depends on correct installation, so a DIY swap can quietly void it. Our technicians, with up to 12 years of experience, handle the sourcing and the install in one visit. Call (888) 419-3650 to schedule your free estimate.
FAQs
Expect roughly 15 to 25 years for the frame, while the sealed glass unit and the hardware wear faster. In Antioch’s heat and Delta wind, seals and weatherstripping are usually the first items to fail, often within 8 to 12 years.
Yes. Rollers, hinges, weatherstripping, and latches are commonly repair items, and a fogged glass unit can often be re-glazed without a full window swap. We diagnose first and only recommend replacement when the frame or the assembly is genuinely past saving.
A single standard unit usually finishes in one visit. A full-house window replacement typically runs one to three days depending on unit count and access, and we confirm the schedule before we start.
We match by certification label, series, and measured rough opening, then cross-reference CGI’s spec sheets. Where an aftermarket equivalent meets spec, we say so; where OEM is needed for performance ratings, we source OEM. Call (888) 419-3650 for an exact quote, and estimates are free.
The same upfront pricing and 730-Day Done Right Promise apply across the brands we service, including KraftMaid, Cambria, and Silestone cabinetry and surfaces for the rest of your home. For windows and doors in Antioch, reach Groundwork Construction Co. of Antioch at (888) 419-3650 to schedule a free estimate and design consult.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.