A Groundwork company - serving Antioch, CA
C

CWS Driveway & Pavers in Antioch, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Driveway & Pavers: The Antioch Owner’s Guide

We install CWS-compatible driveway and paver systems across Antioch, and installed pricing runs about $7,000 – $18,000 for a paver driveway, $4,500 – $12,000 for concrete, and $3,500 – $9,000 for asphalt. When a CWS base, edge restraint, or paver field starts to fail, most Antioch owners spot it the same way: a lip where the driveway meets the garage slab, pavers that rock underfoot after a wet winter, or sand washing out along the curb line while the surface still looks fine at a glance. The damage is almost never the top layer. It’s what’s underneath.

Call (888) 419-3650

Which CWS Models This Applies To

CWS paver and driveway systems come in several families, and the part that fails depends entirely on which one you have. Interlocking concrete paver fields, permeable grid systems, and poured-in-place slabs each use different base prep, edge restraint profiles, and joint material. Getting the match right is the whole job.

To identify what you have, start at the edge. Look for the stamped markings on the restraint course and any expansion joint material visible at the driveway apron. Measure a single paver face and note the thickness in inches. For slab work, look for control joint spacing. These three details tell us the series and let us order the correct compatible base aggregate, joint sand, and restraint profile rather than a generic substitute that will fail again inside two seasons.

On OEM versus aftermarket: for pavers and base materials, quality aftermarket equivalents are often better than original spec if they match the plate size and compressive rating. For proprietary edge restraint and drainage components, we stick with the OEM-compatible part. The slight cost difference isn’t worth a mismatch that lets an edge course creep. If you’re also working with KraftMaid, Cambria, or Silestone elsewhere in the house, the same rule applies across every trade: match the spec, not just the look.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Driveway & Pavers Is Failing

  • Pavers rocking or shifting underfoot. The base aggregate has lost compaction or water is reaching the bedding layer. This shows up first after Antioch’s winter rains and gets worse each season.
  • Sand washing out at the joints and edges. Joint sand is migrating because the edge restraint has separated or the slope is draining wrong. Refilling joints without fixing the edge just delays the next washout.
  • A lip or step where the driveway meets the garage apron. The slab or paver field has settled relative to the foundation. That gap is a trip hazard and a sign the subgrade wasn’t compacted properly.
  • Cracks that reappear in the same place after patching. A crack that returns is a base failure, not a surface flaw. Patching the crack alone never solves it.
  • Standing water or puddling that wasn’t there before. The surface has lost its intended slope, often from settlement. Poor drainage accelerates every other failure on the list.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in Antioch depends on square footage, material choice, and how much base work is required once we open it up. The range below reflects typical residential jobs. Concrete and pavers always run higher than asphalt because of base prep and material cost.

  • Paver driveway installation: $7,000 – $18,000
  • Concrete driveway installation: $4,500 – $12,000
  • Asphalt driveway paving: $3,500 – $9,000
  • Full driveway replacement: $5,000 – $14,000
  • Driveway sealing: $250 – $700

The number that moves most is base excavation. If the subgrade is sound, you pay for surfacing. If it isn’t, you pay to fix what’s under it. Every quote we write is line-item, with no surprise change orders once work starts. The work is covered by our 730-Day Done Right Promise, so if it isn’t done right, we make it right.

DIY or Call Us?

An owner can safely check a few things. Look for rocking pavers, note where sand is washing out, and photograph the joint where the driveway meets the garage. That information helps your estimate go faster. Where DIY goes wrong is the base and the edge. Pulling up pavers to “just add sand” without addressing the compacted subgrade and restraint almost always leads to the same failure within a season, and re-lifting a compacted base by hand rarely gets close to proper density. For concrete and structural slab work, we recommend a professional because improper base prep leads to recurring cracks and settlement. Call us at (888) 419-3650 and we’ll give you an honest read on what’s actually failing before you spend a weekend on it.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch