A Groundwork company - serving Antioch, CA
M

Mr-Glass Bathroom Remodeling in Antioch, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Bathroom Remodeling: The Antioch Owner’s Guide

We install Mr-Glass bathroom fixtures and remodeling components for Antioch homeowners, with full bathroom remodels typically running $9,000 – $28,000 installed and single fixtures or shower replacements landing between $3,000 and $12,000. We’re an independent service provider and not affiliated with Mr-Glass, so we match your exact model and present a written line-item quote before any work starts. Most Antioch owners find us after a door seal stops closing, a frame looks chalky and dull, or water starts collecting where it never used to.

Call (888) 419-3650

Key Takeaways

  • Full bathroom remodels in Antioch: $9,000 – $28,000 installed.
  • Shower replacement $3,000 – $8,500; walk-in shower $4,500 – $12,000; tub-to-shower $3,500 – $10,000.
  • We quote a fixed, written, line-item price. No change orders.
  • Work backed by our 730-Day Done Right Promise.

Which Mr-Glass Models This Applies To

Mr-Glass products show up in Antioch homes in a range of finishes and configurations, and matching the right component comes down to identification, not guesswork. Before we quote anything, we photograph and measure the existing unit, check the manufacturer label for the model and series stamp, and confirm the geometry of the opening. That matters because a shower door or enclosure component built for one series often won’t seat on another, even when the two look identical from three feet away. Sizes drift between production runs, and a seal, roller, or frame trim from a different spec line will fit loosely, fail early, or leave a gap that lets water through.

The OEM-versus-aftermarket call is real and worth talking through. Factory-correct components carry the exact tolerances and glass spec Mr-Glass designed for, which is what we reach for when the original is under the manufacturer’s own coverage or the fit is unusual. Quality aftermarket equivalents make sense for common hardware and for hardware that’s likely to wear again in ten years anyway. We don’t stock parts and we don’t carry them on a truck; we source to your confirmed model so what arrives is the right part the first time. The same disciplined sourcing applies when a project touches KraftMaid, Cambria, or Silestone surfaces.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Bathroom Fixture Is Failing

Antioch’s hard water and the seasonal swing between damp winters and dry, hot summers put real stress on bathroom hardware, glass seals, and frame finishes. Here’s what we see first:

  • Water pooling at the shower base or door track. Usually a worn sweep, seal, or gasket that’s no longer meeting the glass edge, letting spray escape. A $30 part becomes a rot and mold problem if it’s ignored for a season.
  • A door that drags, sticks, or won’t close flush. Failing rollers, worn hinges, or a frame that’s shifted slightly out of plumb. In older Antioch homes, settle of the surrounding wall is often the real culprit.
  • Chalky, cloudy, or pitted surfaces. Mineral scale and the finish degrading from years of hard water and cleaning products. Sometimes it’s cosmetic; sometimes it signals the coating is gone and the surface is exposed.
  • Loose, squeaking, or drifting hardware. Fasteners backing out of substrate that’s softened or wasn’t anchored correctly, common in remodels done by whoever got there first.
  • Cracks, chips, or crazing in the glass or enclosure panel. Thermal stress and age. A crack in tempered glass is a real safety issue, not a patch job, and it needs attention before someone is standing under it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Antioch, most Mr-Glass-related bathroom work lands in our lead range of $9,000 – $28,000 for a full remodel, with targeted components priced individually:

Scope Typical installed range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the number: part or fixture cost, whether the opening needs reframing or plumbing moved, tile and finish selections, and any hidden damage behind the wall. We present upfront pricing in a written, line-item quote, so the number you see is the number you pay. The work carries our 730-Day Done Right Promise.

DIY or Call Us?

Some of this you can safely check. Tightening exposed hardware, cleaning mineral scale, re-seating a sweep or gasket, and confirming your model label are all reasonable. Where DIY goes wrong is the moment you’re dealing with tempered glass, a shifting frame, a door under spring or hinge tension, or anything behind the wall. Glass under stress can fail suddenly and without warning, and a dropped panel or a door that swings free is a genuine injury risk. That’s the point to stop and hand it to someone trained for it.

Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and we answer the phone with a live person 24/7. Call (888) 419-3650 for a free estimate; no-hassle upfront pricing, plus $1,000 off projects over $10,000 and 0% financing for 18 months.

FAQs

How long does Mr-Glass bathroom hardware or a fixture typically last? Most well-made fixtures give 10 – 20 years, with seals, sweeps, and rollers wearing out first. Antioch’s hard water and heavy seasonal use tend to push hardware toward the shorter end.

Can it be repaired instead of replaced? Often yes. Worn seals, rollers, hinges, and hardware are frequently a repair rather than a full replacement. Call (888) 419-3650 and we’ll tell you honestly which it is, with free estimates.

How long does the swap take? A hardware or seal repair is often a single visit. A shower or fixture replacement is usually one to two days; a full bathroom remodel runs longer. We give you a firm timeline in the quote.

How do you source the part? We confirm your model and series from the label and measurements, then source the OEM or quality aftermarket component to that spec. We don’t keep parts in stock or on trucks. Call (888) 419-3650 for an exact quote; estimates are free.

Ready to sort out your Mr-Glass bathroom component? Call Groundwork Construction Co. of Antioch at (888) 419-3650 for a free estimate and design consult. Live person, 24/7, no voicemail. We serve Antioch and the surrounding area with upfront pricing and a 730-Day Done Right Promise. From foundation to finish line.

Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch