Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Kitchen Remodeling: The Antioch Owner’s Guide
Therma-Tru kitchen remodeling in Antioch covers two different jobs, and the word “part” means something different in each. If you’re matching a replacement part for a Therma-Tru door or entry system that’s part of your kitchen or patio access, we source OEM-spec or verified aftermarket components and install them; if you’re planning the kitchen itself, a full remodel in Antioch runs $14,000 – $45,000 installed, with a small kitchen landing at $9,000 – $20,000. Therma-Tru makes doors and door systems, not cabinets or counters, so most owners landing here have a Therma-Tru exterior or patio door tied to their kitchen and a hinge, threshold, sill, weatherstrip, or glass unit that has started to fail. You usually find out the hard way: a patio door that won’t latch square, a sill that weeps during the first real Contra Costa rain, or daylight you can see under the slab after the summer heat has done its work.
Which Therma-Tru Models This Applies To
Therma-Tru builds entry doors, patio and French doors, and door systems across several lines – Fiber-Classic, Smooth-Star, Classic Craft, and the fiberglass and steel entry families – plus the frames, sills, hinges, thresholds, and glass inserts that go with them. The part you need is matched to the door, not picked off a shelf. The fastest way to identify it is the label on the door slab’s hinge edge or top edge: it carries the model and door-hand information a supplier needs to pull the correct sill, sweep, or hinge. If the label is painted over or gone, we measure. Slab widths, hinge spacing, and sill profiles vary by series and by door thickness, and a threshold that looks identical to the eye can be a quarter inch off and leak. On OEM versus aftermarket for Therma-Tru specifically: OEM is the safe default for thresholds, sills, and anything load-bearing, because the extrusion profile and weather seal are matched to the series. For hinges, sweeps, and weatherstrip, a quality aftermarket equivalent from a recognized door-hardware line is often identical in function and less expensive. We quote both and tell you which one we’d put on our own house. One gotcha: the same Therma-Tru series changed sill and sweep profiles across production years, so a “fits Therma-Tru” aftermarket part online can be right for one year and wrong for the next. We confirm the profile against your actual door before ordering. We’re an independent service provider and not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Kitchen Remodeling Is Failing
In Antioch, doors tied to the kitchen take a beating from hot, dry summers and wet winters, and the failures show up in a predictable order. Here’s what to look for:
- The door drags or won’t latch square. Hinge screws loosen or the frame has shifted with seasonal movement, so the door rides against the strike and the latch never fully seats. Left alone, the hinge plate tears out of the jamb.
- Water on the floor at the threshold after rain. The sill pan or threshold seal has failed, letting water wick in from the exterior. This is the one that quietly rots subfloor and framing if it isn’t caught.
- Daylight under the slab. The door sweep or bottom seal has worn flat, or the adjustable sill has dropped. You’ll feel it as a draft and see it as a thin line of light when the door is closed.
- The glass fogged from the inside. The insulated glass seal on a Therma-Tru patio or French door has broken, letting moisture between the panes. The glass is a replaceable unit; the fogging won’t clear on its own.
- Weatherstrip peeling or flattened. The gasket around the frame has compressed or lost its grip in the track. It’s a small part, but it drives the drafts, the noise, and the water intrusion you’ll notice at the corners.
Replacement Cost & What’s Included
For the door and part work, pricing depends on which component failed and how much trim and finish have to come off to reach it. Threshold and sill replacement typically lands in the lower hundreds to around the four-figure mark depending on scope; a full glass insert swap runs higher because the unit itself is the bulk of the cost. Labor is quoted line by line: remove the old part, inspect and treat any rot behind the frame, install the new part, reset and adjust the door so it latches square, seal the exterior, and finish the interior trim. The number you see is the number you pay, and the work is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. For a whole kitchen remodel in Antioch, the installed range is $14,000 – $45,000, with cabinets at $4,000 – $13,000, countertops at $2,000 – $6,500, a backsplash at $800 – $2,500, and an island at $3,000 – $10,000. We also coordinate Ka
See the difference
Before
After
Before
After
Before
After