A Groundwork company - serving Antioch, CA
T

Therma-Tru Driveway & Pavers in Antioch, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Driveway & Pavers: The Antioch Owner’s Guide

We install Therma-Tru-compatible driveway and paver systems throughout Antioch, and most full paver driveways here land between $7,000 and $18,000 installed, with concrete driveways running $4,500 to $12,000. Most Antioch homeowners don’t discover a problem with the paver-to-threshold connection until water starts pooling at the garage door or a section of pavers settles and rocks underfoot. That’s when the call comes in. Therma-Tru builds the door and threshold system; the driveway and paver work around it is what keeps that system dry and level, and in Antioch’s clay-heavy soil, that’s the piece that fails first.

Call (888) 419-3650

Key Takeaways

  • Paver driveways in Antioch: $7,000 – $18,000 installed; concrete: $4,500 – $12,000.
  • Therma-Tru threshold heights and sill specs must match your paver or concrete surface.
  • Antioch’s expansive clay soil is the leading cause of settled driveways that pull away from the door.
  • Most paver repairs and threshold adjustments are completed in a single visit.
  • We’re an independent contractor, not affiliated with Therma-Tru.

Which Therma-Tru Models This Applies To

Therma-Tru entry and garage-adjacent door systems, including the Fiber-Classic, Smooth-Star, and Classic-Craft lines, all share a threshold specification that matters for driveway and paver work. The sill height on the door frame, typically measuring 4-1/2 to 6-5/8 inches depending on the model, sets how the driveway surface must meet the door. Get that wrong and you get water intrusion, threshold rot, or a door that won’t seal. To identify your model, check the label on the door edge or jamb; it lists the series and rough opening. Measure the existing surface-to-sill gap before ordering anything.

The OEM-versus-aftermarket decision is real here. Therma-Tru thresholds and sill extensions are engineered to specific profiles. Aftermarket sill pans and threshold adapters can work, but off-brand pieces often sit a fraction low or high and compromise the seal. For pavers, we match the joint and paver selection to the required drainage slope away from the Therma-Tru threshold. We keep Therma-Tru-compatible components and knowledge on hand; we don’t stock or carry parts on a truck, but we source what your specific model needs. As an independent contractor, we’re not affiliated with Therma-Tru.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Driveway & Pavers Is Failing

Most failures show up at the point where the driveway meets the Therma-Tru door threshold. Here’s what to watch for in Antioch:

  • Water pooling against the threshold. Pavers or concrete have settled or lost slope, letting rain run toward the door instead of away. In Antioch, the clay soil expands and contracts with our wet winters and dry summers, which is why so many driveways here lose grade within a few seasons.
  • A gap between the door sill and the pavement. Settling foundation or compressed base material leaves a visible gap where air and water get in. This is one of the clearest signs the driveway surface and Therma-Tru threshold are no longer aligned.
  • Rocking or loose pavers near the garage door. Failed base prep or washed-out joint sand causes individual pavers to shift. Left alone, the movement spreads and can crack the door frame seal.
  • Wood rot at the door jamb or threshold. Persistent moisture from poor driveway drainage rots the Therma-Tru sill and frame. Rot at the base is the most expensive failure to ignore.
  • Cracks radiating from the door area in concrete driveways. Soil movement and poor subgrade compact the slab against the threshold. Once the crack reaches the door, water intrusion accelerates.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Antioch, paver driveway installation runs $7,000 – $18,000; concrete driveway installation runs $4,500 – $12,000; driveway replacement costs $5,000 – $14,000. Where the work involves bringing the surface back to proper Therma-Tru threshold grade rather than a full replacement, expect to land in the $3,500 – $9,000 range for asphalt or repair-focused paving work. We price parts and labor separately (line-item) so you see the actual cost of the threshold component and the driveway work, not a bundled guess.

What moves the price up: existing driveway demolition, base repairs, drainage correction toward the door, and the paver or concrete selection you choose. What’s included: surface prep, correct slope to your Therma-Tru threshold, edge restraints where needed, and cleanup. Every project is covered by our 730-Day Done Right Promise, and upfront pricing means the number you see is the number you pay. Call (888) 419-3650 for a free estimate on your Antioch driveway.

DIY or Call Us?

A homeowner can safely check a few things: measure the gap between your Therma-Tru threshold and the driveway, look for low spots where water sits after rain, and spot loose pavers or cracked joints. Those checks cost nothing and help you describe the problem. Where DIY goes wrong is in the base and grade work. Re-leveling pavers or re-pouring a slab to the exact slope a Therma-Tru threshold requires is precise work; get the drop-off wrong and you create water intrusion into the door system that costs far more to fix later. Concrete work near an existing door frame also risks damaging the sill seal if done carelessly. If the driveway has settled, cracked at the threshold, or left a gap at the door, call us at (888) 419-3650. We’ll tell you straight whether you need a repair or a replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch