Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The Antioch Owner’s Guide
Home additions and ADU work in Antioch (garage conversions, detached units, in-law suites) typically runs $45,000 – $130,000 installed depending on scope, and scheduling a design consult is the fastest way to a real number. Belgard matters here specifically because their hardscape and structural wall systems (Belgard pavers, retaining wall block, and their affiliated hardscape lines) are common on Antioch lots, and owners searching for a Belgard “home additions & ADU” part are usually looking for something real and specific: a retaining wall cap, a paver edging channel, a wall block unit, or a hardscape fastener. The way most owners discover the failure is drainage. Water pools against the addition footing, a section of hardscape settles or heaves, and suddenly the paver system that frames the new addition isn’t doing its job.
Which Belgard Models This Applies To
Belgard hardscape is sold by product family, not one universal part number. The lines most relevant to Antioch additions and ADUs are the Belgard paver lines (used for walkways, patios, and aprons around new construction), Belgard retaining wall block (used for grade change around ADU pads and addition footings), and their cap and finishing units. Identifying the right part starts with the original install documentation or the block itself. Belgard molds a stamp into the bottom or back of most wall block, and paver units are dimensionally identifiable (length x width x height, usually in millimeters) with a caliper or tape. Spec ranges worth knowing: most Belgard wall block face dimensions run roughly 6″ to 18″ across, and paver thickness is typically 2 3/8″ to 2 3/4″ for standard units, 3″ plus for heavy-traffic or vehicular units. Where OEM matters vs. aftermarket: for color-matched cap and finishing units, stay with the Belgard OEM line because dye lots shift between production runs, and a mismatched dye lot is visible from the street. For hidden edging, base material, and fasteners, a quality aftermarket equivalent is functionally identical if it matches ASTM C936 for solid concrete pavers. Any block or paver sourced for a structural wall supporting an addition or ADU grade change must match the original wall system’s weight and interlock, because mixed systems fail at the interface.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
- Water pooling against the addition or ADU foundation. Usually a settled or displaced wall block course or a clogged under-drain. Standing water against a footing is the single most expensive problem to defer.
- Paver or wall block heave after a wet winter. Antioch’s clay-heavy soils swell when saturated. Block that heaves is sitting on inadequate base (usually too thin or not compacted in lifts).
- Wall block walking out at the face. A retaining wall pushing forward is an interlock or drainage failure, not cosmetic. It needs eyes on it before the next rainy season.
- Caps or edging loose or missing. Adhesive failure, or a fastener that was never rated for exterior exposure. Small part, real trip and displacement risk.
- Sunken or tilted steps and landing at the addition entry. Base failure under the entry hardscape. Common where the addition was framed before the hardscape was properly compacted.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Belgard-compatible hardscape repair and rebuild in Antioch, when part of an addition or ADU scope, generally falls inside the $45,000 – $130,000 installed range for the project. A standalone repair of failing edging, caps, or a section of wall runs at the low end; a full drainage and hardscape rebuild around a new addition runs at the high end. What drives the range: wall height and length, drainage scope (French drain, under-drain, grading), whether the failure is at the surface or at the base, dye-lot matching on visible units, and whether the addition or ADU final grade has to be re-established. Pricing is upfront, no surprises. The number you see is the number you pay, and all work is covered by the 730-Day Done Right Promise. We’re an independent provider, not affiliated with Belgard, so we source the exact compatible unit a Belgard-spec job needs rather than substituting whatever’s convenient.
DIY or Call Us?
The honest split: a homeowner can safely inspect and photograph the failure. Check that block faces are plumb, look for water staining or soil piping at the base of the wall, confirm caps are seated, and note the dimensions and mold stamp on any block that has to be replaced. Where DIY goes wrong is the repair itself. Retaining walls holding back grade around an addition or ADU fail from the base up, and surface patching hides the drainage failure underneath, which means the next wet season brings it back, often worse. A wall supporting a footing or grade change carries real load, and a collapse is a structural and safety event, not a cosmetic one. Take the photos, get a real assessment, and rebuild it once. Call (888) 419-3650 to schedule a free estimate.
FAQs
How long should Belgard hardscape around an addition last in Antioch? A properly based Belgard paver or wall system typically lasts 25 to 40-plus years in Antioch’s climate, but the base and drainage determine that, not the block. Our technicians have up to 12 years of experience assessing exactly where the base failed. Call (888) 419-3650 for an exact quote, and estimates are free.
Can the failing section be repaired instead of replaced? Yes, often. Localized wall block or edging failures can be repaired if the base and drainage are addressed at the same time. A repair that skips the base is a repeat failure waiting on the next rainy season.
How long does the swap take? A cap-and-edging repair can be done in a day or two. A wall or hardscape section rebuild that involves excavation, drainage, and compacted base takes several days to a couple of weeks depending on scope. We’ll give you a written timeline before work starts.
How do you source the right Belgard part? From the mold stamp and dimensions on the unit, or from the original install documentation, never from a guess. Belgard’s dye lots shift between runs, so matching the production series matters on any visible block. We source the compatible unit and confirm the spec before we order.
Whether it’s a paver repair around a new addition or a full Belgard-spec hardscape rebuild on an ADU, our team pulls the permits, passes the inspections, and guarantees the work in writing. Free project estimate and design consult, no-hassle upfront pricing, and 0% financing for 18 months with $1,000 off projects over $10,000. Our technicians are background-checked and arrive in uniform, and calls are answered by a live person 24/7. We also install KraftMaid, Cambria, and Silestone fixtures in the interior build-out and finish of additions and ADUs. Call (888) 419-3650 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.