Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Antioch Owner’s Guide
Unilock kitchen remodeling in Antioch typically runs $14,000 – $45,000 installed, depending on layout, cabinet scope, and whether we’re working around existing plumbing and wiring. We install Unilock-compatible kitchen systems across Antioch and handle the full scope from tear-out to final walkthrough, with a free estimate and design consult before anything gets ordered. This page is for Antioch homeowners who already have a Unilock kitchen product and a part that’s failed or failing.
The symptoms usually show up the same way. A cabinet door that won’t stay shut, a soft-close hinge that slams, a drawer glide grinding as it pulls, a countertop seam that’s opened a hairline, or a backsplash tile lifting near the range. In Antioch’s dry summer heat, those failures accelerate. We see them most in kitchens that sit on the sunny south or west side of a house in the older neighborhoods near downtown, where interior temperatures swing hard between afternoon and evening.
Which Unilock Models This Applies To
Unilock produces kitchen products across several lines, and the part you need depends on which line and year your components came from. Before you order anything, pull the door or drawer and look for a stamped or stickered model code on the back face or inside the cabinet box. Measure the hinge cup bore (the round hole in the door back, commonly 35mm in Unilock’s frameless systems), the door overlay, and the drawer box height. Those three numbers narrow you down faster than a photo ever will.
The OEM-versus-aftermarket call matters here. Unilock’s own replacement parts match their tolerances exactly, especially on soft-close hinges and undermount drawer glides, but they carry a premium and lead times can stretch. A quality aftermarket equivalent (Blum, for example, in many compatible configurations) often installs cleanly and costs less, provided you match the mounting pattern and load rating. We always confirm the fit before quoting, because a near-match that doesn’t quite line up is worse than a wait.
To be clear: Groundwork Construction Co. of Antioch is an independent service provider. We are not affiliated with Unilock, and we don’t stock or carry Unilock parts. We source the correct part per job and install it to the manufacturer’s spec.
Alongside Unilock, we also work with KraftMaid, Cambria, and Silestone on kitchen systems, so if your project includes cabinet or countertop replacement in the same visit, the scope can move as one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
- Soft-close hinges that slam or stick. The damping mechanism inside the hinge has worn out. It’s the first component to go on any soft-close system, and in Antioch’s heat it happens faster than owners expect – typically within a few years of daily use, not a decade.
- Drawer glides that grind or won’t stay closed. Either the glide’s ball bearings have dried out or the cabinet box has shifted enough that the drawer runs out of alignment. In Antioch homes built before 1990, we often find both, and the fix needs to address the box, not just the glide.
- Doors sitting crooked or rubbing the frame. A single hinge has loosened or failed, which throws the whole door off square. This one is easy to catch early – the tell is a faint scuff line starting on the door edge.
- Countertop seams opening at the joint. Adhesive failure or seasonal movement. Antioch’s summer dry heat and winter rain push joints harder than a stable climate does, and a seam that’s opening a hairline will keep going if it isn’t reset.
- Backsplash tile lifting or hollow behind. The thinset bond has failed, often from moisture near the sink or range. Tap it with a knuckle; a hollow sound means it’s already loose and needs to come out before it cracks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Antioch, here’s what Unilock kitchen work runs, installed. These are honest ranges, not teaser numbers – and you get a written line-item quote before we start.
| Scope | Installed Range (Antioch) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: layout complexity, cabinet door count, whether we’re moving plumbing or electrical, and whether you’re matching an existing Unilock line or replacing a full run. Parts and labor are itemized separately so you see exactly what you’re paying for. Every job carries the 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
You can safely pull a door or drawer and check the model code, measure the hinge cup, and inspect glides for physical wear. That’s diagnostic work, and it helps us quote accurately. What we’d steer you away from is resetting countertop seams or re-bonding backsplash tile yourself – bad adhesive work at a seam fails again within a season, and re-tiling a backsplash that’s already delaminating can crack surrounding tile and turn a small repair into a larger job. In kitchens that have shifted at the cabinet box, the fix that looks right doesn’t stay right unless the underlying issue is addressed.
We use upfront pricing with no surprises: the number you see is the number you pay. Call (888) 419-3650 to schedule your free estimate and design consult – calls are answered by a live person, 24/7.
FAQs
A Unilock kitchen properly installed lasts 15 – 25 years on major components like cabinets and countertops, but the moving parts go far sooner. Soft-close hinges and drawer glides typically need replacing within 5 – 10 years, and Antioch’s heat cycles can shorten that on doors facing west. Call (888) 419-3650 for an exact assessment.
Often yes. A single hinge can sometimes be re-tightened or swapped without touching the rest of the door, and a drawer glide can be re-anchored if the box is sound. Countertop seams and lifted backsplash tile are usually replace-in-place, not repair, because adhesive failures tend to repeat. Call (888) 419-3650 and we’ll tell you honestly which side you’re on.
Most individual hinge or glide replacements are completed in a single visit, and a countertop or backsplash repair usually runs one to three days depending on cure time and scope. Larger cabinet or countertop replacements follow the full kitchen timeline. Call (888) 419-3650 for a window that fits your schedule.
We identify your Unilock line from the model code on the door or cabinet box, confirm the mounting pattern and load rating, then source either OEM or a matched quality aftermarket equivalent depending on lead time and your budget. We don’t claim to stock parts – we source per job and verify fit before installing. Call (888) 419-3650 to get started.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.