A Groundwork company - serving Antioch, CA

Tremron Windows & Doors in Antioch, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Windows & Doors: The Antioch Owner’s Guide

We install and service windows and doors for Antioch homeowners, and for failed glass, frames, and hardware we work from a typical installed range of $4,500 – $15,000 for a window replacement and $8,000 – $25,000 for impact-rated window installation, depending on the size of the opening and the series of the unit. For a single cracking or sticking panel, the fix is usually the frame, the seal, or the hinges, not the whole system. Most owners in Antioch discover the problem the same way: a window that won’t stay shut through a Delta wind evening, or a door that dragged all summer and now has daylight showing at the strike side.

Call (888) 419-3650

We’re an independent service provider, not affiliated with Tremron. That distinction matters: we source Tremron-compatible parts by measurement and application, and we tell you honestly when a generic drop-in will do the job and when it won’t.

Which Tremron Models This Applies To

Tremron’s window and door lines run across a range of series, and the parts inside them are not interchangeable between them. The hinge style, the roller sizing, the weatherstrip profile, and the sill height all change with the series and the opening. Before we quote anything, we check the Tempered/Laminated glass etch mark, the sill label, and the frame print stamp, then measure the opening at both the head and the sill, because Antioch’s older homes have settled more than most, and a single measurement often misses a sagging jamb by a quarter inch or more.

For Tremron, the OEM versus aftermarket call is usually straightforward. The hardware (rollers, strikes, lock sets) is often interchangeable with a quality aftermarket equivalent and saves money. The glass, the frame extrusions, and the weatherstrip should match the original series, or you lose the wind-load rating and the water intrusion barrier that made the unit code-compliant in the first place.

The part that fails first also depends on the line. On sliding units, the rollers and the weatherstrip go. On casement and awning units, the crank operator and the hinge arm. On hinged doors, the strike plates and the tail of the lock. If you can read the brand label or the glass etch, you’re halfway to a correct match.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Windows & Doors Is Failing

  • A window that drags or won’t shift without a shove. The roller, the track, or the weatherstrip has worn or swollen; the seam between the sash and frame is often the giveaway.
  • Fogging or clouding between the panes. The sealed unit’s perimeter seal has failed, and moisture from the air has gotten between the glass. That’s a unit swap, not a cleaning job.
  • Water on the interior sill or on the drywall beneath. The weatherstrip, the glazing seal, or the sill flashing has broken down, and Antioch’s wet-season wind-driven rain will find it. Fix this early.
  • A door that drags at the head or squeaks at the hinges. The hinge or the frame may have shifted with the foundation; the anchor screws and the strike alignment are usually the root cause.
  • A draft you can feel when the wind blows from the west. The perimeter seal or the gasket around the frame has compressed and no longer closes the gap. It’s one of the most common calls we get from Antioch.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window replacement in Antioch runs $4,500 – $15,000 for a typical whole-home set; impact-rated glass pushes it to $8,000 – $25,000. A single-unit repair, glass swap, or hardware kit is a fraction of that, and we price it as parts plus labor, itemized on the written quote before anyone touches the frame. What drives the range: the number of openings, whether the glass is tempered or laminated, the series of the existing unit, and whether the sill and flashing need to be rebuilt.

Every job is covered by our 730-Day Done Right Promise; if the fit isn’t right, we come back and make it right. The number on the quote is the number you pay, no change orders.

DIY or Call Us?

You can safely check a few things: read the glass etch, look at the drain slots in the sill, clean the track, and see whether the sash settles back in place. What you shouldn’t attempt is replacing a sealed glass unit, re-flashing the sill, or rehanging a door frame that’s out of square. Those go wrong in the same way every time, and the water damage from a bad sill repair costs far more than the repair itself. On a second-floor window or a door with a glass sidelight, the risk is height and weight, not just the part.

Call (888) 419-3650 and we’ll tell you which of the two it is. No-hassle upfront pricing, a live person 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch