Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Garage Doors in Antioch, CA: What They Cost and How the Install Runs
Impact garage doors in Antioch, CA typically run $4,500 to $11,000 installed for a standard two-car opening, and a single-car door lands closer to $2,800 – $6,000. Plan on one day for removal and rough prep, a second day for track and opener work, and a third for final adjustment and inspection sign-off. Call (888) 419-3650 and we’ll walk your opening and give you a written, line-item number before anyone touches the door.

The installation, stage by stage, and what you decide at each one
Garage door work here isn’t a swap-and-go job, and anyone quoting it like one hasn’t looked at an Antioch opener circuit. Here’s how it actually runs.
Stage 1: Measure and structure check (about 90 minutes, day 1)
We measure the rough opening in three places, check the header for sag, and confirm the jamb is plumb. On the older flats near downtown, the original 1950s – 1970s framing has usually moved enough that a factory-stock size won’t fit cleanly. You decide here whether we shim and re-face the jamb or reframe it. Reframing adds roughly $400 – $900.
Stage 2: Tear-out and prep (2 – 4 hours, day 1)
The old door, springs, and track come out, and we inspect what’s behind them: rotted jamb bottoms, corroded anchor plates, cracked concrete at the sill. This is where Antioch jobs surprise people. Delta humidity creeping into a north-facing opening lets the bottom of a steel jamb rust through years before the door itself fails. You’ll get photos of anything we find and a number before we fix it.
Stage 3: Tracks, hardware, and springs (half a day, day 2)
Tracks go up plumb, then hinges, rollers, and the torsion or extension spring system. Springs are the part we’re pickiest about here; the coastal-influenced air off the river eats bare steel fast, so we spec galvanized or powder-coated springs and stainless or coated fasteners by default. You decide between torsion (smoother, quieter, longer life) and extension (cheaper, more common on older single-car openings).
Stage 4: Door panels and opener (half a day, day 2)
Panels set into the tracks, then the opener and safety reversal test. If you’re adding a belt-drive opener or a battery-backup unit, this is when it goes in. We test the photo-eye and the force setting twice, because a door that reverses late is a real hazard, not a nuisance.
Stage 5: Balance, weather seal, and walk-through (2 – 3 hours, day 3)
We balance the door so it holds at the halfway point, seal the perimeter, and run the door a dozen times to check for binding. Then you get a walk-through of the manual release, the maintenance schedule, and anything we’d flag for later. A permit inspection, if required, gets scheduled here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the decision comes down to how much corrosion resistance and insulation you’re paying for. Here’s the honest trade-off on each:
- Steel, 24-gauge vs. 25/26-gauge: The thicker 24-gauge panels resist denting and hold paint better in wind-driven dust. It runs $600 – $1,200 more than thin-gauge builder stock, and it’s worth it on an opening that catches the afternoon Delta wind.
- Insulated vs. non-insulated: A polyurethane-core door (R-12 to R-18) keeps a garage-attached room cooler in a Delta summer and quieter year-round. Non-insulated saves $400 – $900 but you’ll hear every gust and feel the heat.
- Torsion vs. extension springs: Torsion is smoother and lasts longer; extension is cheaper and simpler to service. On a two-car opening we lean torsion.
- Galvanized or coated springs and stainless hardware: The single biggest corrosion upgrade for an Antioch door. Adds roughly $150 – $350 and can double spring life near the river.
- Nylon vs. steel rollers: Nylon rollers run quieter and don’t rust. Steel rollers are cheaper and squeak. We default to nylon.
- Opener: chain, belt, or jackshaft: Belt-drive for quiet under a bedroom; jackshaft where ceiling height is tight; chain for budget.
- Finish and glazing: Impact-rated glazing in the top section costs more but resists wind-borne debris. Faux-wood steel finishes have gotten good enough that most buyers skip real wood entirely.
What Impact Garage Doors cost in Antioch, CA
For a two-car impact-rated door, the installed range in Antioch is $4,500 – $11,000. Single-car runs $2,800 – $6,000. Those numbers include tear-out, new track and hardware, springs, and haul-away. Here’s what pushes a job from the low end to the high end:

| Line item | Typical range |
|---|---|
| Single-car impact door, installed | $2,800 – $6,000 |
| Two-car impact door, installed | $4,500 – $11,000 |
| Galvanized/coated spring & stainless hardware upgrade | $150 – $350 |
| Jamb reframing | $400 – $900 |
| New opener (belt or jackshaft) | $350 – $900 |
| Rotted jamb or sill repair | $200 – $700 |
What moves the number: opening size and whether it’s a stock or custom width; existing condition (a rotted jamb is a different job than a clean one); insulation and glazing choices; whether the opener needs replacing; and permit scope. What’s in a written estimate: door, track, hardware, springs, labor, haul-away, and a firm price. What usually isn’t: structural reframing discovered after tear-out, and opener upgrades you didn’t ask for. We list those as separate line items so there are no surprises.
One safety note worth saying plainly: torsion springs store enough energy to break a bone or worse. Never wind or unwind them yourself, and don’t let a handyman “adjust” one. That work belongs to someone trained for it.
See the difference
Before
After
Before
After
Before
AfterWhat Antioch homes specifically do to this job
Antioch sits on the Delta at the foot of the East Bay hills, and that geography attacks garage hardware first. The older flats, especially the blocks near the downtown and riverfront where the water table runs high, hold moisture in the air and in the ground, and the steel in a garage opening pays for it. Springs pit and snap years before you’d expect inland. Hinges seize. Anchor plates rust through the concrete. The 1950s – 1970s ranch tract homes on the flats were built with the original single-car openings and thin-gauge doors, so the jamb is often the weak link before the door is. Up in the southern hills, the 1980s – 2000s subdivisions have wider openings and better framing, but the afternoon winds off the river drive dust into tracks and rollers, and that grit wears nylon and steel alike. We build a corrosion inspection into every job here: we look at the spring, the hinges, the fasteners, and the opener chain, and we tell you what to replace now versus what can wait.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Impact Garage Doors in Antioch
Most jobs run three working days: one for tear-out and prep, one for track and door, one for opener and final adjustment. A straightforward single-car swap in good condition can wrap in a day and a half. Call (888) 419-3650 and we’ll give you a realistic schedule for your opening.
A like-for-like door replacement usually doesn’t require a permit, but a new opening, a reframe, or structural header work does, and we pull it. We handle the inspection scheduling so you’re not chasing the city. Call (888) 419-3650 to confirm what your job needs.
In most cases, yes. If the rough opening is plumb and the header is sound, the new door goes into existing framing and nothing else moves. Reframing only comes up when we find rot or sag, and you approve it before we proceed.
Expect $4,500 – $11,000 installed for a two-car opening and $2,800 – $6,000 for a single, depending on size, insulation, and hardware. Call (888) 419-3650 for a free written estimate with every line itemed out.
Every install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. The door itself carries the manufacturer’s warranty on top. Call (888) 419-3650 and we’ll spell out exactly what’s covered.
Get a free estimate on your Antioch impact garage door
We’ll come out, measure the opening, inspect the springs and jamb for corrosion, and hand you a written, line-item estimate with 0% financing for 18 months and $1,000 off projects over $10,000 available. Calls are answered by a live person, 24/7. Reach us at (888) 419-3650 to schedule your free estimate for impact garage doors in Antioch.
Written by the team at Groundwork Construction Co.