Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Oakley, CA: What It Costs and What the Job Looks Like
Walk-In Showers & Shower Remodeling in Oakley typically runs $9,000 – $28,000 for a full rebuild with new tile, waterproofing and glass, and most jobs take 3 to 6 working days once we’re on site. A straight shower replacement without moving the drain lands at $3,000 – $8,500, while a walk-in install in a new footprint falls in the $4,500 – $12,000 band. Call (888) 419-3650 and we’ll give you a straight number for your Oakley shower before anyone touches a tile.

How Oakley’s Lots Shape a Shower Remodel
Oakley is mostly 1990s and 2000s tract housing sitting on former Delta farmland and expansive clay, which means the showers we open up here often hide movement a homeowner didn’t expect. Slab-on-grade foundations in the subdivisions along the Hwy 4 corridor settle over time, and when a shower pan has cracked or a wall has bowed, it’s usually tied back to soil movement, not a bad install. We plan for that in Oakley so the rebuild accounts for what’s actually under the floor instead of just covering it. The hot, dry summers also mean a lot of dry-season demo work, and we schedule wet-area waterproofing around the cooler months so the membrane cures right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Walk-In Shower & Shower Remodeling Process, Stage by Stage
A walk-in shower rebuild is a wet-area project more than a cosmetic one, so the work runs on a fixed sequence. Here’s what a typical Oakley job looks like from demo through walkthrough.
Stage 1: Demo and Damage Assessment (Day 1)
We tear out the old shower components, tile, and any failed backing board, and we open the floor and walls far enough to see what’s really there. If the pan has shifted with the clay soil underneath, we find it during demo, not after the new tile goes down. You’ll decide at this point whether to address a soft subfloor or leave the existing framing.
Stage 2: Rough-In and Plumbing (Day 2)
We set the drain, valve, and any new showerhead or body spray locations. If the drain stays put, this is fast. If you want a linear drain or to move the fixture wall, this is where the added cost lives. You’ll finalize the valve brand and trim here.
Stage 3: Waterproofing (Day 2 – 3)
We install a bonded waterproofing membrane over the shower walls and a sloped mud bed or foam pan with a sealed drain connection. This is the step that separates a shower that lasts from one that leaks into the ceiling below. A code inspection on the waterproofing and drain connection happens at this stage when the permit requires it.
Stage 4: Tile and Glass (Day 3 – 5)
Wall tile goes up first, then the floor with a slip-resistant set, then grout and sealant. The glass panel or door is templated and typically installed a day or two after tile, so the measurement is accurate to the finished opening. You’ll pick the glass style and hardware finish before templating.
Stage 5: Walkthrough (Day 5 – 6)
We test the drain, check every seam, walk you through the finished shower, and hand over care instructions. Any punch items are handled on the spot under our 730-Day Done Right Promise.
The Walk-In Shower Options You’ll Choose Between
The materials you pick drive both the look and where the final number lands. Here’s the honest trade-off on each.

- Acrylic or fiberglass pan and surround: The budget choice at the low end of the range. Fast to install, easy to clean, but it looks like a builder-grade unit and won’t take custom tile.
- Porcelain tile walls: The standard for most Oakley walk-ins. Durable, water-resistant, customizable, and priced in the middle. Large-format tiles reduce grout lines and cleaning.
- Natural stone (travertine, marble): The high end. Beautiful, but requires sealing and careful waterproofing, and adds to both material and labor cost.
- Frameless glass panel or door: The look most homeowners want. A full frameless enclosure runs higher than a framed one but opens up the room visually and lasts.
- Linear vs. center drain: A linear drain allows a single large tile on the floor and a sleeker look. It costs more to install because the drain has to be set precisely.
- Bench seat and niche: A built-in bench and recessed niche are popular in Oakley homes and add labor but make the shower far more usable day to day.
See the difference
Before
After
Before
After
Before
AfterWhat Walk-In Showers & Shower Remodeling Costs in Oakley, CA
Plan on $9,000 – $28,000 for a full walk-in shower remodel in Oakley, with the median job landing between $12,000 and $18,000. Five things push a job toward either end of that range.
| Line Item | Typical Oakley Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement (same footprint) | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Full walk-in remodel with tile and glass | $9,000 – $28,000 |
The variables: shower size (a 4×4 vs. a 5×6 walk-in with a bench), existing condition (a failed pan or water-damaged framing adds demo and repair), plumbing relocation (moving the drain or valve wall adds cost), material grade (acrylic vs. porcelain vs. natural stone, framed vs. frameless glass), and permit scope (structural changes and waterproofing inspections add time and fees). A written estimate from us lists every line locked, with no change orders unless you ask for one. What isn’t included unless you add it: vanity work, flooring outside the shower, and fixture upgrades beyond the trim you choose.
What Oakley Homes Do to This Job
Oakley’s newer subdivisions and the older ranch homes near downtown along Main Street are two different jobs, and we plan for both. In the 1990s and 2000s tract homes, the original showers are often past their service life, and the clay soil underneath the slab can leave a shower pan slightly out of level. We check for that before we pour a new one. In the older ranch and farmhouse stock near the historic downtown, we’re more likely to find galvanized plumbing and a shower built into a wall with no proper waterproofing, so the rebuild includes bringing the connection and drain up to current code. Permits are pulled through the City of Oakley, and the waterproofing and drain inspection is scheduled before tile goes on. If you’re already planning other work, homeowners often pair this with Roof Replacement & Installation in Oakley so the heavy trades are handled in one season, or with Metal Roofing in Oakley if they’re upgrading. We cover the full Oakley area, and if the shower is part of a full Bathroom Remodeling in Oakley project, we coordinate the trades as one scope. Our Bathroom Remodeling team can also advise on tile and fixture selections that match the rest of the bath.
Serving Oakley, CA – Our Local Coverage Area
We serve Oakley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Oakley
A walk-in shower remodel takes 3 to 6 working days once we start, and 2 to 4 weeks total from the first call to the finished shower. Demo, rough-in, waterproofing, tile, and glass install each run in sequence, and the permit inspection adds a scheduled window.
Yes, you need a permit for a walk-in shower remodel in Oakley when you’re changing plumbing, the drain, or the shower footprint, and the waterproofing and drain connection get inspected before tile. A straight tile-and-fixture refresh on the same footprint sometimes doesn’t require one, and we’ll tell you which applies before we bid.
Yes, most walk-in shower remodels in Oakley stay on the existing drain and framing, which keeps the project in the $3,000 – $8,500 replacement band and shortens the timeline. Moving the drain or relocating a wall is what pushes the job into the higher range.
A walk-in shower remodel in Oakley runs $9,000 – $28,000 depending on size, materials, plumbing changes, and existing condition. Call (888) 419-3650 for an exact quote – the on-site estimate is free and the number is locked.
Every walk-in shower we build in Oakley is covered by our 730-Day Done Right Promise, so if the waterproofing, tile, or glass fails within that window, we come back and make it right.
Get a Free Walk-In Shower Estimate in Oakley
Call (888) 419-3650 and we’ll schedule a free on-site estimate for your Walk-In Showers & Shower Remodeling in Oakley, measure the shower, and walk you through the materials and total before you commit. A live person answers around the clock, and the number you see on the written estimate is the number you pay. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.