Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Discovery Bay, CA: What the Job Actually Involves
Custom & Geometric Windows in Discovery Bay usually means arched, angled, trapezoidal or half-round units set into stucco walls, and a typical install runs 3 to 6 weeks from template to final trim at $6,500 – $22,000 for a small grouping or $18,000 – $45,000+ for a whole-home package with impact-rated glass. The number moves with shape complexity, frame material and how much stucco has to be rebuilt around the opening. Call (888) 419-3650 to schedule a free on-site estimate; we’ll template the openings and put a written line-item quote in your hands before anything is ordered.

How We Build a Custom or Geometric Window Job, Stage by Stage
Shaped windows aren’t a stock swap. Every stage depends on the one before it, and the measurements you approve on day one are the measurements we build to.
Stage 1: Site measure and template (day 1, 2 – 3 hours)
We measure every opening and, for true radius and angled units, build a physical template of the rough opening so the factory cuts to the real wall, not to a plan. You decide the glass package and frame material at this visit; those two choices drive the lead time and the price.
Stage 2: Order and fabrication (3 – 6 weeks)
Shaped units are made to order. Arches, eyebrows and trapezoids take longer than rectangles, and impact-rated glass adds time. You’ll confirm finish color and grille pattern here, and we’ll set the install date so it lines up with any stucco or trim work.
Stage 3: Demo and rough-opening prep (day 1 of install, 4 – 8 hours)
We cut back stucco and lath, remove the old unit, and check the framing. On Discovery Bay’s 1980s – 2000s stucco homes this is where we find water damage or a header that needs sistering. We don’t hide that in a change order later; you see it before we close the wall.
Stage 4: Set, flash and seal (day 2, 4 – 6 hours)
The window goes in level and square, with proper flashing, a continuous weather seal, and a sill pan that actually drains. This stage is what keeps Delta wind-driven rain out of a wall.
Stage 5: Stucco, trim and final inspection (day 3 and any patch cure time, 1 – 3 days)
We rebuild the stucco around the shape, install interior trim, and finish with a water test and a walkthrough. You sign off only when the reveal lines are even and the unit opens and closes cleanly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions happen in the first week, and each one trades cost against how the window looks and how long it lasts in a Delta-facing wall.
- Frame material. Vinyl is the budget pick and handles humidity well but limits how tight a radius you can get. Fiberglass holds a shape with less bulk. Wood-clad aluminum is the premium choice for a Mediterranean or Spanish-style facade and costs the most.
- Glass. Standard dual-pane is fine on interior walls. On canal-facing elevations, impact-rated or laminated glass is worth the upgrade for wind-borne debris and UV.
- Shape configuration. Half-rounds and eyebrows are the most common. Trapezoids and angled units need custom framing and cost more per square foot.
- Grille and finish details. Simulated divided lites, custom colors and radius trim add cost but carry the look on a custom home.
Andersen and Marvin both build to template for shaped windows, which is why we start with a physical opening rather than a catalog number. Pick the material first and the rest gets easier.
What Custom & Geometric Windows Cost in Discovery Bay, CA
In Discovery Bay, expect $6,500 – $22,000 for a small grouping of shaped windows and $18,000 – $45,000+ for a full custom package, with impact-rated glass pushing toward the high end. Those figures are market-calibrated to this area and stay consistent with what we quote elsewhere on the site.

Four things push a job toward the high end:
- Shape complexity. A half-round is straightforward. A stacked arch over an angled transom multiplies fabrication time.
- Existing wall condition. Stucco cracks, old flashing or a rotted header add prep work once the wall opens up.
- Structural changes. Enlarging a rough opening or adding a header means structural work and a bigger permit scope.
- Glass and frame grade. Impact glass and wood-clad aluminum are the biggest cost levers.
A written estimate from us lists the units, glass, flashing, stucco patch, trim and permit line by line, so you can see exactly what you’re paying for. The number you see is the number you pay. Call (888) 419-3650 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Discovery Bay Homes Specifically Do to This Job
The houses here shape the work more than any checklist could. Discovery Bay is a water-oriented Delta community where most homes sit on man-made canals, sloughs or levee-backed waterfront lots, so a lot of our custom window work faces open water and Delta wind on at least one elevation. Those canal-front elevations take more sun, more wind-driven rain and more UV than a shaded inland wall, and the glass and finish we recommend reflects that. The housing stock runs 1980s – 2000s custom and semi-custom homes, many Mediterranean and Spanish-style stucco with tile roofs, and plenty of the original stucco around those arched and angled openings is now 20 to 40 years old. When we cut into it, we plan for patching and re-flashing rather than assuming the wall is sound. Permits go through the local building department for any structural change or new rough opening, and inspections cover framing, flashing and final. If you’re planning a wider exterior upgrade, this work is often part of a full Windows & Doors in Discovery Bay scope, and homeowners often pair it with Concrete Driveways & Concrete Work in Discovery Bay while crews and equipment are already on site.
Serving Discovery Bay, CA – Our Local Coverage Area
We serve Discovery Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Discovery Bay
Most jobs run 3 to 6 weeks from template to final trim, because the shaped units are fabricated to order. The install itself is usually 2 to 3 days once materials arrive. Call (888) 419-3650 to get a firm timeline on your openings.
Yes, if the rough opening changes size or any structural framing is involved; a straight like-for-like swap in an existing opening sometimes doesn’t require one. We pull the permit and handle the inspections so nothing is left to you. Call (888) 419-3650 for a free estimate that spells out the permit scope.
In most cases, yes, as long as the shaped unit fits the existing rough opening. When a new arch or angled unit needs a larger opening, some framing and header work is unavoidable, and we’ll flag that before you commit. Call (888) 419-3650 to find out which applies to your wall.
Plan on $6,500 – $22,000 for a small grouping and $18,000 – $45,000+ for a full custom package, with impact glass, complex shapes and wood-clad frames at the top end. Call (888) 419-3650 for an exact quote – estimates are free.
Every install we do is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. The fabricator’s window warranty is separate and we’ll hand you the documentation at the final walkthrough. Call (888) 419-3650 to talk through coverage on your project.
Get a Free Estimate on Custom & Geometric Windows in Discovery Bay
Call (888) 419-3650 and a live person answers, any hour, any day. We’ll set a time to walk your openings, template the shapes, and talk through glass and frame options, then send a written line-item estimate. Our Windows & Doors service covers the full range, and you can see the wider area we work in on our Discovery Bay page. Groundwork Construction Co. of Antioch – upfront pricing, no surprises.
Written by the team at Groundwork Construction Co.