Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Discovery Bay, CA: What They Cost and How Long They Take
Paver driveways in Discovery Bay typically run $7,000 to $18,000 for a standard canal-side or inland lot, and most jobs are finished in 4 to 6 working days once materials land on site. The number that matters most is base prep: Delta peat and fill soils settle differently than inland ground, so excavation, compaction, and drainage work usually account for 30 to 40 percent of the total. Call (888) 419-3650 for a free on-site estimate.

How We Build a Paver Driveway in Discovery Bay, Stage by Stage
Paver work is mostly base work. The Belgard or Unilock surface you see is the last 3 inches of a job that lives or dies on what’s underneath it.
Stage 1: Site walk and layout (day 0)
We measure the existing drive, check slope away from the garage and the front door, and confirm where the water will run. On canal-front lots, this is also when we figure out whether the rear yard has an equipment path or whether materials have to come overland from the street. You decide paver style, color, and pattern at this visit.
Stage 2: Demolition and haul-off (day 1)
Existing concrete, asphalt, or old pavers come out. A typical two-car drive in Discovery Bay generates 8 to 14 tons of debris, which we haul the same day. This is the noisiest part of the job, and it’s also when we discover what the last driveway was hiding – roots, cracked sub-base, or soft spots where irrigation lines ran.
Stage 3: Base and drainage (days 2-3)
We excavate 8 to 10 inches, lay woven geotextile fabric to keep Delta soil from pumping up into the base, and compact Class II base rock in 2-inch lifts. On lots where the water table sits high, this is where we add a channel drain or slope the base to daylight. You’ll decide at estimate time whether you want a drain – it’s an add, not a surprise.
Stage 4: Edge restraint and pavers (days 3-5)
We set a concrete or spiked edge restraint, then lay pavers on a 1-inch sand bed, cut the borders with a wet saw, and run a plate compactor across the field once to seat everything. Irregular patterns and curved borders take longer than a running bond. A 600-square-foot drive usually goes down in two days.
Stage 5: Polymeric sand and final walk (day 5 or 6)
We sweep polymeric sand into the joints, activate it with water, and walk the finished drive with you. Full cure takes about 24 hours before you drive on it. Anything you flag on that walk gets handled before we leave, and anything that shows up later is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the material conversation happens at the estimate, and it’s worth knowing the trade-offs before you’re sitting at the table.
- Concrete pavers vs. clay brick. Concrete pavers from Belgard or Tremron run less and hold color well. Clay brick costs more per square foot but ages into a look some buyers want. On a Delta lot with heavy winter rain, both handle freeze-free CA winters fine – the difference is budget and style.
- Standard 60mm vs. thicker 80mm pavers. 60mm is right for a residential drive. 80mm is worth considering if you park a heavy truck, an RV, or a boat trailer on the drive, which isn’t unusual on Discovery Bay canal lots.
- Permeable vs. solid pavers. Permeable systems with open joints handle runoff on lots where the drive slopes toward the house or the levee. They cost roughly 10 to 15 percent more but reduce the drainage you have to build around.
- Pattern: running bond vs. herringbone vs. ashlar. Herringbone locks pavers together and resists shifting under turning tires; running bond is faster to install and cheaper. Ashlar gives a more custom look at a middle cost.
- Edge restraint type. Concrete edge is durable and nearly invisible; spiked plastic edge is cheaper and easier to repair. Both work – we recommend concrete on any drive wider than 20 feet.
- Salt-and-pepper blends vs. single-color. Unilock and Techo-Bloc both make blended tones that hide tire marks and dust better than solid colors. On Discovery Bay’s dusty summer driveways, that matters.
What Paver Driveways Cost in Discovery Bay, CA
Plan on $7,000 to $18,000 for a full paver driveway installation here. Where you land on that range comes down to five things:

- Square footage. A single-car drive runs near $7,000. A three-car drive with a turnaround pushes past $16,000.
- Existing surface removal. Tearing out old concrete adds $1,500 to $3,500 depending on thickness and haul distance.
- Base conditions. Soft fill, high water table, or buried debris adds excavation depth and geotextile, which can add 15 to 25 percent to the job.
- Material grade. Premium Belgard or Techo-Bloc lines sit toward the top of the range; standard Tremron lines sit lower. Prices vary by SKU, so the estimate is line-item.
- Drainage and access. A channel drain, a slope change, or a canal lot with no rear equipment path adds labor and sometimes a barge or conveyor for materials.
Every written estimate we hand over lists base depth, fabric, drain, edge, pavers by name and color, polymeric sand, and haul-off as separate lines. What it does not include without a specific line: irrigation reroute, gas or electrical line relocation, driveway apron changes required by the county, and any HOA fees. Those get flagged before work starts, not after. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Discovery Bay Homes Specifically Do to This Job
Discovery Bay’s housing stock is mostly 1980s to 2000s custom and semi-custom homes, and a big share of those sit on man-made canals, sloughs, or levee-backed lots. That changes paver work in ways inland contractors don’t always plan for. The Delta peat and fill under many of these drives settles unevenly, so we go deeper on base and add fabric to stop the soil from pumping into the gravel. On canal-front streets, the rear yard often has no equipment path, which means a bobcat can’t reach the back of the drive – materials come off the street side or, on a few lots, by barge. And the drive apron often ties into a levee-maintained easement, which means a county inspection before we close up. If your project grows past the drive, it’s often part of a full Driveway & Pavers in Discovery Bay scope. We pull permits, we pass inspections, and we don’t hand you back a driveway that drains toward the garage.
Serving Discovery Bay, CA – Our Local Coverage Area
We serve Discovery Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Discovery Bay
Most paver driveways here finish in 4 to 6 working days once materials are on site, with another 24 hours before you can drive on them. Large drives with heavy base work or drainage add a day or two. Call (888) 419-3650 for a timeline built around your specific lot.
Yes, in most cases a driveway replacement or new installation on a Discovery Bay lot needs a permit, and apron work that ties into a levee easement gets inspected. We pull the permit and schedule the inspection. Ask about it at your estimate – it’s a line item, not a surprise.
Usually yes. We hand-dig around irrigation lines and mark utilities before excavation. Buried gas, electrical, or sewer lines that need relocation add cost, and we flag those before demo starts. Some homeowners pair this with Garage Conversion ADU in Discovery Bay work if they’re already reworking the front of the house.
The range is $7,000 to $18,000, driven mainly by square footage, base conditions, and material grade. Every quote we write is line-item and fixed. Call (888) 419-3650 for your exact number.
Every paver driveway we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Paver settling, joint sand loss, or edge failure within that window is on us. Call (888) 419-3650 to talk through the details.
Get a Free Paver Driveway Estimate in Discovery Bay
Call (888) 419-3650 for a free on-site estimate on paver driveways in Discovery Bay. We’ll look at your existing drive, check the base and drainage, and hand you a written line-item quote with material options and a firm timeline. A live person answers around the clock – no voicemail. If your project touches the wider property, our Driveway & Pavers service, our coverage across Discovery Bay, and our ADU Design & Permitting in Discovery Bay work all tie into the same conversation. Estimates are free, financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co..