Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Bay Point, CA: What to Expect
Cabinets & countertops in Bay Point usually run $14,000 to $45,000 for a full run of new cabinetry with stone or quartz tops, and most of that work is finished in three to five weeks once the boxes land. The price moves with cabinet line, countertop material, and whether the layout changes. Call (888) 419-3650 and we’ll walk your kitchen, measure it, and put a written line-item number in front of you. No cut sheets, no ballpark guesses over the phone.

How the job actually runs, from demo to the last caulk bead
Cabinets and counters aren’t a one-day installation, and anyone who tells you otherwise hasn’t done one. Here’s the sequence we follow in Bay Point homes, with the timing you should hold us to.
Stage 1: site check and templating (day 1). We confirm the wall is plumb and the floor is level before a single box comes in. In older single-story homes here, that check regularly turns up out-of-square walls and a floor that’s dropped a quarter inch across the run. You decide right here whether we shim and scribe to fit the existing room or open a wall and correct the framing. That one decision is usually the difference between a clean fit and a fight at the end.
Stage 2: demo and prep (days 2 to 3). Old cabinets and counters come out, we cap the plumbing, and we inspect what’s behind them. Water damage at the sink base, scorched outlets behind the range, a missing shutoff valve: this is when we find it. You approve any repair before we keep going, in writing, at a fixed price.
Stage 3: cabinet install (days 4 to 6). Bases go in first, leveled and fastened to studs, then uppers hung to a laser line. You’ll want to have picked your door style and finish weeks earlier, because most lines, KraftMaid included, run two to four weeks from order to delivery. This is the stage where you confirm hardware placement and any pull-out or drawer-insert choices.
Stage 4: countertop template and fabrication (days 7 to 14). Stone is templated after the boxes are in, not before. Digital template, then fabrication, then install. You choose the edge profile and the sink cutout here, and you sign off on the slab layout so the veining lands where you want it.
Stage 5: final fit and walkthrough (days 15 to 21). Sink set, faucet tied in, appliance panels on, toe kick and trim closed out. We run water, check every drawer front for alignment, and hand you the warranty paperwork. Most Bay Point jobs, counters and all, finish inside three weeks once materials are on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that decide how this looks in ten years
Cabinet and countertop picks aren’t aesthetic-only. Each one carries a real trade-off in cost, upkeep, and how it handles a working kitchen. Here’s how we lay them out.
- Stock vs. semi-custom cabinets. Stock boxes are fast and cheap but limited in size, so you’ll fill gaps with filler strips. Semi-custom, which is where KraftMaid sits, lets you hit the ceiling exactly and pick interior fittings. The price gap is real, and it’s mostly worth it if your walls aren’t standard.
- Quartz vs. granite counters. Quartz is non-porous, doesn’t need sealing, and holds a consistent pattern. Granite is natural, unique per slab, and needs resealing roughly once a year. Cambria-grade quartz lands at the higher end of the countertop range; a mid-grade granite can come in lower per square foot.
- Plywood vs. particleboard boxes. Plywood handles a Bay Point kitchen that sees real cooking and occasional humidity swings better over the long haul. Particleboard is fine and less expensive, but keep it away from the sink and dishwasher where moisture lives.
- Full-height backsplash vs. a 4-inch splash. A short splash is faster and cheaper. A full-height splash behind the range looks finished and is easier to wipe down, but it adds a step, and we plan for it up front rather than retrofitting it.
- Slab edge profiles. Eased and bullnose are standard. A waterfall or mitered edge on an island looks sharp and adds labor and material waste, so budget for it before you fall in love with a photo.
What Cabinets & Countertops costs in Bay Point, CA
Expect $14,000 to $45,000 for a full cabinet and countertop replacement in Bay Point, with most jobs landing somewhere in the middle. Here’s where the line items sit in our written estimates:
| Line item | Typical range |
|---|---|
| Cabinet installation (supply + install) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Full cabinets & countertops job | $14,000 – $45,000 |
Four things push a number toward the top of that range. First, kitchen size: a galley versus an L-shape with an island changes the cabinet count fast. Second, existing condition: if the wall behind the old cabinets is water-damaged or out of square, repair adds cost. Third, material grade, from a stock line to semi-custom with quartz. Fourth, scope: relocating the sink, adding a circuit for a new range, or moving a wall means permits and trade work on top of the install.

Every written estimate lists cabinets, counters, demo, disposal, and labor as separate lines. What it typically doesn’t include: appliance costs, flooring, and any structural work uncovered during demo. We don’t spring those on you mid-job. If something turns up, you approve it at a fixed price before we touch it. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Bay Point homes specifically do to this job
Bay Point is unincorporated, which changes the paperwork before it changes the work. Permits go through Contra Costa County rather than a city building department, and that matters when your project includes moving plumbing, adding a circuit, or opening a wall. A straight cabinet swap usually doesn’t pull a permit. Relocating a sink or adding an outlet does, and we handle that filing and the inspection that follows.
The housing stock adds its own wrinkle. A lot of Bay Point homes date to the post-WWII and mid-century tract era, and those older single-story kitchens were framed when a 24-inch range was standard. Walls are frequently out of plumb by an inch or more over an eight-foot run, and floors have settled. We plan for shimming and scribing rather than pretending the room is square. Newer infill homes are tighter, but their kitchens are smaller, so layout matters more than repair. The delta breezes that sweep through here also mean we watch for moisture coming in around older windows while we’re in the room, since a cabinet run jammed against a leaky window frame doesn’t last. Curious about the wider scope? See our Kitchen Remodeling in Bay Point page.
Serving Bay Point, CA – Our Local Coverage Area
We serve Bay Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about Cabinets & Countertops in Bay Point
Three to five weeks from demo to finish, with the cabinet lead time (two to four weeks) being the longest wait. Installation itself is about two to three weeks once materials arrive. Call (888) 419-3650 for a timeline tied to your specific kitchen.
A straight replacement usually doesn’t require one, but moving plumbing, electrical, or a wall does, and Bay Point projects file through Contra Costa County. We tell you up front which applies and pull what’s needed. Call (888) 419-3650 and we’ll confirm your scope.
Yes, and it’s the most common way we do it. Keeping the sink and range in place keeps the job in the $14,000 to $24,000 range and avoids a permit. Moving them means re-routing supply and drain lines, which adds cost and inspection time.
A partial run, like bases only or counters only, lands lower than a full replacement. Cabinet-only work starts around $4,000 and counters start around $2,000; a full kitchen renovation runs $14,000 to $45,000. Call us for an exact quote, free and in writing.
Our workmanship carries the 730-Day Done Right Promise: if a cabinet run isn’t level or a counter seam isn’t right, we come back and make it right. Manufacturer warranties on the cabinets and slabs run separately. Call (888) 419-3650 and we’ll spell out both in writing.
Get a real number for your Bay Point kitchen
Call (888) 419-3650 to schedule a free on-site estimate for cabinets & countertops in Bay Point. We’ll measure the room, check the walls and floor, and hand you a written line-item quote with the cabinet line, counter material, and timeline spelled out. Ask about the $1,000 off projects over $10,000 and 0% financing for 18 months while you’re on the call. We answer live, day or night. Homeowners in Bay Point often pair this with a Walk-In Showers & Shower Remodeling in Bay Point or a Tub-to-Shower Conversion in Bay Point while the dust is already flying; ask us to bundle the estimates. You can see all the areas we cover on our Bay Point service page, and read more about our full Kitchen Remodeling service if you’re weighing a bigger scope.
Written by the team at Groundwork Construction Co.