Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Bay Point: What the Job Really Involves
Patios, Walkways & Pool Decks in Bay Point usually run $3,500 to $11,000 for a paver patio, with walkways and pool surrounds priced by the square foot inside that same band. A typical patio takes three to six working days from demo to sealer, longer if the base needs re-grading or the layout has to be staked against a slope. Call (888) 419-3650 and we’ll walk your yard, talk through materials, and put a line-item number in writing.

How We Build a Patio, Walkway or Pool Deck, Stage by Stage
The sequence below is what actually happens on a Bay Point job. It doesn’t change much from one yard to the next, but the time each stage takes does.
1. Site walk and layout (day 1)
We mark the patio or walkway footprint with stakes and string, check the fall for drainage, and confirm setbacks against the property line. This is where you decide final shape, square footage, and whether the walkway ties into the existing drive or runs separate. Half a day, and it’s the decision that locks the price.
2. Demo and excavation (days 1-2)
Out comes old concrete, sod, or failing pavers, and we dig down to the depth the base needs. Bay Point’s soft bay-fill soils often mean digging deeper than a homeowner expects, because a thin base over shifting ground cracks within a season. We haul spoils off-site the same day. One to two days depending on how much is being removed.
3. Base prep and compaction (day 3)
Class II aggregate goes in lifts, watered and plate-compacted between each one, then checked with a laser for slope. This is the stage nobody sees and the one that decides whether the patio is flat in three years. You don’t have to decide anything here; you do get to walk the base before we set a single paver.
4. Paver or slab install and cutting (days 4-5)
Field pavers go down, then the border or soldier course, then all cuts at edges, steps and the pool coping. Pool decks get extra attention at the waterline, where the coping has to sit level and the pitch has to shed splash away from the shell. You’ll pick the pattern and border ahead of this stage; the cutting is ours.
5. Polymeric sand, sealer and final walk (days 5-6)
We sweep polymeric sand into the joints, mist it to set, and apply sealer once the surface is dry. The final walk is where we hand you the written workmanship terms and flag anything that needs a follow-up visit after the first rain.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Patio, Walkway and Pool Deck Options, and What Each One Costs You
Most of the budget conversation comes down to material and pattern. Here’s how the real choices shake out.
- Concrete pavers (Belgard, Tremron): the workhorse choice for patios and pool surrounds. Holds color, individual units can be lifted and reset if a utility line needs digging, and the interlocking pattern handles minor ground movement. Higher upfront than poured concrete, but repairable.
- Clay brick pavers: warmer look, excellent for a walkway leading to the front door. Slightly more per square foot and a little more demanding on base prep because the units are smaller.
- Techo-Bloc and Unilock slab systems: large-format slabs that read closer to natural stone with cleaner joints. Great for a modern pool deck. Heavier units mean more cutting time, which shows up in labor.
- Natural stone (flagstone, travertine): the most expensive per square foot, and travertine around a pool needs sealing to survive splash and sun. Beautiful, and the least forgiving of a bad base.
- Pattern and border: a simple running bond is the cheapest layout. Herringbone, basketweave, or a contrasting border course adds labor and a modest material upcharge, but it’s what makes a patio look designed rather than poured.
Around a pool, add coping and a non-slip finish to the equation. That’s typically a separate line item and worth pricing early rather than discovering mid-job.
What Patios, Walkways & Pool Decks Cost in Bay Point, CA
A paver patio in Bay Point runs $3,500 to $11,000. Walkways are usually quoted by length and width, and a pool deck sits at the upper end of that band once coping and drainage are included. Five things push a job toward the low or high number:
- Square footage: the biggest single variable. A 200-square-foot patio and a 600-square-foot one share almost no cost structure.
- Existing condition: tearing out old concrete, hauling sod, or correcting a slope that drains toward the house all add demo and re-grading time.
- Base depth: soft soil in parts of Bay Point means deeper excavation and more aggregate, which is material and labor you can’t skip.
- Material grade: a standard Tremron paver set in running bond sits at the low end; large-format Techo-Bloc slabs with a border course climb toward the top.
- Permit scope: a simple ground-level patio is often exempt, but anything structural, elevated, or tied into a pool shell may require a Contra Costa County permit and inspection.
Our written estimate includes demo, haul-off, base material, pavers, polymeric sand, sealer, and the workmanship terms. It excludes anything we find under the surface, like a root system or an old footing, and we tell you before we touch it. That’s the no-hassle upfront pricing we work by: the number you see is the number you pay.

See the difference
Before
After
Before
After
Before
AfterWhat Bay Point Homes Specifically Do to This Job
Bay Point sits where delta breezes hit the Diablo Range, and that afternoon wind does real work on an outdoor surface. Loose sand blows out of joints fast, so we use polymeric sand rather than plain sand on every patio and walkway here, and we seal. The bigger factor is the ground: much of Bay Point is built on soft bay-fill soils, and patios poured or laid over thin base settle and crack within a season or two. We dig deeper and compact in lifts because of it.
Permitting is the other local wrinkle. Bay Point is unincorporated, so there’s no city building department – permits go through Contra Costa County. That changes the timeline and the paperwork, and we handle it. Much of the housing stock here dates to the post-WWII and mid-century tract era, so we’re often working around older single-story homes, upgraded electrical, and yards that have settled unevenly over decades. Newer infill lots behave differently and usually need less correction.
If your patio is part of a full Driveway & Pavers in Bay Point plan, or you’re adding a walkway while an ADU goes in, we coordinate the phases so the yard isn’t torn up twice – homeowners often pair this with ADU Site Prep & Utilities in Bay Point when utilities and grading are happening anyway.
Serving Bay Point, CA – Our Local Coverage Area
We serve Bay Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Patios, Walkways & Pool Decks in Bay Point
A standard patio takes three to six working days from demo to final sealer. Larger pool decks, deep base corrections, or a permit through Contra Costa County can stretch that to two weeks. We give you a day-by-day schedule in the estimate so you know when the yard will be clear.
Ground-level patios and walkways are often exempt, but elevated decks, structures, and pool-related work usually need a Contra Costa County permit. Because Bay Point is unincorporated, there’s no city hall to check with – the county is the authority. We confirm the requirement before work starts and pull what’s needed.
Yes, in most cases. A patio or walkway can usually be laid around existing sprinkler lines, pool equipment, and conduit. If a line sits where the base needs digging or a slope needs correcting, we flag it before we start and quote the relocation as a separate line, never a surprise.
Pool decks fall at the upper end of the $3,500 to $11,000 patio range, with coping and drainage included. Material choice moves it most: pavers and standard coping sit lower, large-format slabs or natural stone climb toward the top. Call (888) 419-3650 for an exact quote – estimates are free.
Every patio, walkway, and pool deck we build is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right, and that’s in writing before we break ground. Our technicians have up to 12 years of experience, and every project is background-checked and uniformed.
Homeowners in Bay Point often ask about pairing an outdoor project with interior work, and we handle those too – Full Kitchen Remodeling in Bay Point is a common one. For the broader outdoor scope, see our Driveway & Pavers service, and for the full list of what we cover, visit our Bay Point service area page.
Get a Written Estimate for Patios, Walkways & Pool Decks in Bay Point
Call (888) 419-3650 for a free on-site estimate. A live person answers, day or night, and we’ll schedule a visit to measure, stake the layout, and talk through materials. You’ll get a written line-item quote with no change-order games, plus 0% financing for 18 months and $1,000 off projects over $10,000. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co.