Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Concord: What It Takes and What It Costs
Replacing a vanity, tile and fixtures in a Concord bathroom usually runs $9,000 – $28,000 for a full tear-out and rebuild of the wet zone, or $2,000 – $6,000 for a vanity-and-fixtures refresh with the existing tile left in place. A straight vanity swap with no plumbing relocation runs $800 – $3,000. Call (888) 419-3650 for a free on-site estimate. Most of these jobs move from demo to finished in two to three weeks once materials are on site.

How We Handle Vanities, Tile & Fixtures: The Stage-by-Stage Process
This isn’t a vague “we’ll handle it” job. The sequence is fixed, and knowing what happens each day tells you what decisions land on you and when.
Stage 1: Site walk and measurement (day 1)
We measure the rough opening, check the wall for plumb, and look under the existing vanity at the shutoff valves and drain line. In Concord ranch homes, that look often turns up a cracked tile or a shutoff that won’t close, and we build those contingencies into the written estimate. You leave this visit with a line-item number, not a ballpark.
Stage 2: Material selections (days 1 – 5)
You pick the vanity cabinet (stock, semi-custom, or custom), the countertop slab or top, the tile field and accent, the faucet, and the fixture finishes. This is the decision that moves budget most. We bring samples and photos of real installs. Nothing gets ordered until you sign the selection sheet.
Stage 3: Demo and prep (days 3 – 5)
We pull the old vanity, tile, and fixtures, cap the plumbing, and check the substrate. Rotted backer board gets replaced. We set the new waterproofing membrane over the shower and wet walls and let it cure per spec. Any framing or subfloor repair happens here, before the first tile goes down.
Stage 4: Plumbing rough-in and tile (days 5 – 12)
If you’re relocating the vanity, the sink drain, or the shower valve, this is where the plumbing and electrical rough-in happen, followed by inspection. Then we set tile, grout, waterproof the transitions, and install the fixtures and vanity top. Tile layout and grout spacing get finalized with you before the first course.
Stage 5: Fixtures, trim, and final walkthrough (days 12 – 15)
Faucet, mirror, towel bars, and shower trim go in. We caulk the wet joints, clean up, and walk the room with you. Any punch items get written down and scheduled before we leave. The 730-Day Done Right Promise covers the work from that walkthrough forward.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh for Vanities, Tile & Fixtures
- Vanity cabinet: stock cabinets are the cheapest and fastest but come in fixed widths. Semi-custom lets you hit the exact wall dimension and choose the door style. Custom is the highest cost but the only way to fit an awkward Concord alcove or a plumbing chase.
- Countertop: quartz is the default for a reason (durable, low maintenance). Marble looks better but etches and stains. Solid surface is the budget move and forgives a lot.
- Tile material: porcelain is the value pick; ceramic is thinner and cheaper but chips at edges. Natural stone (travertine, marble) costs more, needs sealing, and shows every grout line. Schluter trim on outside corners keeps the edge crisp.
- Tile size: large-format (12×24 or bigger) means fewer grout lines and a cleaner look but drives up installation cost because the substrate has to be perfectly flat. Small mosaic is cheaper to install but busier.
- Fixtures: a Toto toilet and a Grohe or Sterling shower trim are the practical mid-high tier. Lower-cost builder fixtures work, but the finishes wear and cartridge replacements come sooner.
What Vanities, Tile & Fixtures Costs in Concord, CA
The realistic range in Concord is $9,000 – $28,000 for a full bathroom rebuild, with a smaller scope (vanity, tile, and fixtures without moving anything) landing between $2,000 and $6,000. A vanity-only swap is $800 – $3,000. What moves the number:

- Size of the room. A 5×8 hall bath and a 10×12 primary bath are two different jobs.
- Existing condition. Rotted subfloor, failed waterproofing, and cracked tile all add labor before the new materials go down.
- Relocating plumbing or electrical. Moving the drain, supply lines, or a GFCI outlet adds real cost. Keeping the fixture locations where they are is the single biggest money saver.
- Material grade. Porcelain and a stock vanity cost half what natural stone and a custom cabinet do.
- Permit scope. A like-for-like swap often doesn’t need a permit. Moving plumbing or adding a shower valve does, and that’s a line on the estimate.
The written estimate lists materials and labor line by line. It does not include lead-time delays from a back-ordered fixture, structural repairs found after demo (we quote those separately, never surprise you), or HOA approval fees if your Concord community requires them. Call (888) 419-3650 for an exact quote on your vanities, tile & fixtures before you commit to a number.
See the difference
Before
After
Before
After
Before
AfterWhat Concord Homes Specifically Do to This Job
Concord’s housing stock shapes vanities, tile & fixtures work more than most people expect. Most of the city is post-WWII and 1950s – 70s single-story ranch tracts, and that means original slab foundations, aging galvanized or early copper plumbing, and a lot of shallow-pitch construction. Open the wall behind a 1962 ranch vanity in the neighborhoods off Clayton Road or in the older parts of the 94519 ZIP, and you may find galvanized supply lines that need to be replaced before the new vanity goes in. You may also find a 1950s or 1960s addition that was built without permits, which means the plumbing you’re reworking may not be where any drawing says it is. Seismic requirements are real work in Concord too: soft-story and unbolted foundation retrofits are ongoing across the East Bay, and if we find that while we’re in the wall, we tell you and quote it separately. The microclimate matters here as well. Concord sits between the cool Diablo Valley floor and the hot inland slopes of Mount Diablo, so the same neighborhood can have moisture-driven substrate failures on one side and heat-stressed grout and caulk on the other. Summer heat also affects how fast thinset cures, and winter rain pushes any older drainage issue into the wall cavity. We cover all of Concord. For a larger scope that includes the rest of the room, this becomes part of our Bathroom Remodeling in Concord, and the tile selection process often overlaps with what homeowners pair with Tile Roofing in Concord or Specialty Roofing in Concord when the exterior is also being updated.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vanities, Tile & Fixtures in Concord
Two to three weeks from demo to finished walkthrough, depending on scope. A vanity-and-fixtures refresh moves in three to five days, while a full tile rebuild with relocated plumbing runs closer to three weeks. Material lead times (custom cabinets, natural stone slabs) sit on top of that, so call (888) 419-3650 to slot a start date and avoid sitting on an open bathroom.
A like-for-like swap usually does not require a permit; moving plumbing, relocating a drain, or adding a shower valve does. We pull the permits and pass the inspections as part of the job, and the cost shows up as a line item on the estimate, not a surprise. Call (888) 419-3650 and we’ll tell you what your specific scope needs.
Yes. Keeping the sink drain and supply lines where they are is the single biggest cost saver, dropping a vanity job into the $800 – $3,000 range. A new vanity can often be set over the existing shutoffs and drain stub with minimal wall work.
$9,000 – $28,000 is the realistic range, driven by room size, material grade, and how much the existing plumbing and substrate need. A smaller-scope tile and fixture update lands between $2,000 and $6,000. Call (888) 419-3650 for a line-item quote; estimates are free and there’s no change-order surprise.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, one of the longest workmanship guarantees in the residential construction space. Our technicians are background-checked and uniformed, and someone answers the phone 24/7 if anything comes up. Call (888) 419-3650 to schedule your free on-site estimate.
Get a Free Estimate on Vanities, Tile & Fixtures in Concord
Call (888) 419-3650 to schedule a free on-site estimate for your vanities, tile & fixtures. A live person answers 24/7, we bring samples and measurements to the visit, and you leave with a written line-item quote and no surprise charges. Groundwork Construction Co. builds vanities, tile & fixtures from foundation to finish line, and every job is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.