Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Concord, CA: What It Costs and How Long It Takes
An aluminum fence in Concord runs $4,000 – $10,000 installed, with most residential jobs landing between $3,500 and $9,000 for 100 – 150 linear feet of ornamental-grade aluminum. Plan on 2 – 4 days on site once materials are in: one day for layout and setting posts in concrete, one to two days for panels and gates, and a half day for cleanup and a final walkthrough. HOA pre-approval and City of Concord permits, when required, add 1 – 3 weeks before we break ground. Call (888) 419-3650 for a free on-site estimate with a written line-item price.

How We Install an Aluminum Fence in Concord, Step by Step
Aluminum fencing is a ground-up job. The panels are only as true as the posts underneath them, so the first day matters more than anything that happens after. Here’s the sequence we follow.
Day 1: Site walk, layout, and utility marking
We meet you on site to confirm the property line and any HOA setback rules before a single hole is dug. Layout gets marked with paint or stakes, and we call 811 to have underground utilities flagged. If the run crosses an existing irrigation line or a gas stub, we find out now, not with a shovel. You decide two things here: exact post spacing and whether the line follows the property line or sits back a foot or two.
Day 1 – 2: Demo and post setting
Old fencing comes out first if there’s anything to remove. Then we auger holes to depth, set posts in concrete, and check them with a level and string line. Posts need to cure before panels go up, so this stage usually wraps by the end of the second day. This is where the Concord soil matters: the valley floor near downtown and along the BART corridor is generally well-drained, but the clay-heavy pockets uphill toward the Mount Diablo foothills can hold water, so we set deeper and add drainage to the base when the soil calls for it.
Day 2 – 3: Panels, gates, and hardware
Rails and pickets go up section by section. Gate posts get extra bracing because a gate swings on them thousands of times. We hang the gate, adjust the hinges, and check that it latches clean. If you chose a self-closing or self-latching gate for a pool, we confirm it meets the latch height the code requires. You’ll walk the line with us before we finish.
Day 3 – 4: Touch-up, cleanup, and final walk
Any field-cut pickets get dressed, hardware gets a final pass, and we clean the site. You get a walkthrough of every section, gate, and post, plus the written workmanship coverage. Most aluminum jobs here finish in a single visit after materials arrive, though larger runs with multiple gates can stretch to a fourth day.
Before day 1: permits and HOA approval
In Concord, a fence under 6 feet generally doesn’t need a building permit, but anything over that, or anything in a front-yard setback, usually does. HOA architectural review is a separate approval and sometimes takes longer than the city. We’ll tell you which applies to your lot and what the submittal needs before we order material.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Aluminum fencing isn’t one product. The choices below drive both the look and the price, and each one has a genuine trade-off.
- Residential vs. industrial grade: Residential aluminum runs about 1/16 inch thick on rails and pickets. Industrial grade is heavier and costs more, but it’s the right call for a long span, a slope with wind exposure, or a gate that gets daily use. For most single-story Concord ranch homes, residential grade holds up fine.
- Picket spacing and height: Standard 4-foot heights suit a front corner. 5-foot is the most common privacy-leaning choice. 6-foot is the maximum most HOAs will approve without a variance. Tighter picket spacing adds cost per foot but reads more secure.
- Powder-coat finish: Black is standard and cheapest. Bronze and architectural colors add a modest premium and hide dust better on the sunny inland slopes. Powder coat is what keeps aluminum from oxidizing, so don’t cut it short.
- Rackable vs. stepped panels: If your yard slopes, rackable panels follow the grade in a smooth line; stepped panels jump down at each post. Rackable looks cleaner and costs a little more per section.
- Gates: A pedestrian gate is a single-panel swing. A double-drive gate adds cost and needs heavier posts and hardware. Self-closing and self-latching options are worth the money if there’s a pool on the property.
- Matching with other jobs: Homeowners often pair this with Driveway Repair & Replacement in Concord when the driveway meets the fence line, or with Patios, Walkways & Pool Decks in Concord when the fence encloses a new pool deck. If the fence is one piece of a wider yard rebuild, it’s often part of a full Fence Installation in Concord project.
What Aluminum Fence Costs in Concord, CA
Residential aluminum fence installation in Concord runs $4,000 – $10,000, and most jobs land in the $3,500 – $9,000 band for a typical 100 – 150 foot run. The variables below are what push a job toward the low or high end.

- Linear footage and height: Every additional 10 feet adds $250 – $500. Going from 4-foot to 6-foot pickets adds roughly 20 – 30% to the panel cost.
- Gates: A pedestrian gate runs $400 – $1,200 installed depending on width and hardware. A double drive gate can run $1,500 – $3,500.
- Site conditions: Sloped ground needs rackable panels or stepped layout. Rocky or clay-heavy soil means slower augering and deeper post holes.
- Demo and haul-off: Removing an existing wood or chain link fence adds $300 – $900 depending on length and disposal.
- Permits and HOA submittals: City permit fees and HOA architectural review add time and a modest fee; we itemize both in the estimate.
Every written estimate from us is upfront pricing, no surprises: the number you see is the number you pay, and nothing gets added mid-job without your written approval. The estimate includes posts, panels, concrete, hardware, gates, and cleanup. It doesn’t include landscape repair around the post line or repairing irrigation lines we uncover during digging, though we flag both before work starts. Call (888) 419-3650 for an exact quote. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Concord Homes Specifically Do to This Job
Concord’s housing stock shapes this job in ways a generic fence page won’t tell you. The city is dominated by post-WWII and 1950s – 70s single-story ranch tract homes, with denser mid-century apartments and condos near the downtown and BART corridors, plus newer infill and hillside builds toward the Mount Diablo foothills. On the older tracts, we regularly find original property lines marked by decades-old wood or chain link that’s long past its life, and posts sunk into soil that hasn’t been touched since the 1960s. That matters because old post holes often hide old irrigation stubs, old concrete footings, or gas lines running to a long-removed BBQ. We check all of it before we auger.
The microclimate gradient is the other local reality. Concord sits where the cool, fog-influenced Diablo Valley floor meets the hot inland slopes of Mount Diablo, so the same subdivision can see marine-layer moisture on the west side and extreme summer heat exposure uphill. Aluminum handles both far better than wood, but the powder coat still has to be a real one, and the footing depth has to account for soil that stays moist uphill and dries out hard downhill. Jobs we do in the 94519 and 94527 ZIP codes near the valley floor get set differently from jobs up toward the foothills. If you’re on a slope, allow extra time for the layout stage.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Concord
A typical residential aluminum fence in Concord takes 2 – 4 days on site once materials are delivered. Most jobs fit in a single visit after the posts cure, though longer runs with multiple gates and sloped ground can stretch to a fourth day. HOA and permit approvals add 1 – 3 weeks before that. Call (888) 419-3650 to schedule a free estimate and get a firm timeline for your property.
Usually no, if the fence stays under 6 feet and out of the front-yard setback. Anything taller or forward of the setback line typically needs a City of Concord building permit, and most HOAs require architectural review regardless of city requirements. We’ll tell you exactly which applies to your lot during the estimate. Call (888) 419-3650 to start.
Yes, in most cases. Aluminum posts sit in small augered holes, so the disturbance is limited to a narrow strip along the line, and we don’t need to relocate plumbing unless a post lands directly on a buried line. When that happens, we flag it before we dig and offer a workaround. Call (888) 419-3650 for a free on-site assessment of your layout.
Residential aluminum fence in Concord typically runs $4,000 – $10,000, with most jobs landing between $3,500 and $9,000 depending on length, height, gates, and site conditions. The price in our written estimate holds; nothing changes mid-job without your written approval. Call (888) 419-3650 for an exact quote. Estimates are free.
Every installation is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. The manufacturer’s powder-coat and structural warranty on the panels runs separately and varies by product line; we hand you the paperwork at the final walkthrough. Call (888) 419-3650 to ask about warranty terms for the specific product you’re considering.
Get a Free Aluminum Fence Estimate in Concord
We’ll come out to your property, walk the line with you, confirm HOA and permit requirements, and give you a written line-item estimate before any work starts. Our technicians have up to 12 years of experience, and calls are answered by a live person 24/7. Call (888) 419-3650 to schedule your free estimate for aluminum fence in Concord. For the wider scope of yard work, see our fence installation service or visit our Concord service area page.
Written by the team at Groundwork Construction Co.