Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in Walnut Creek, CA: What It Takes and What It Costs
Fence repair in Walnut Creek typically runs $3500 – $9000 when you’re replacing failed posts, re-setting a leaning run, swapping rotted boards, or rebuilding a section that winter storms and dry-rot finally finished off. A single-post or small gate repair lands at the low end; a long shared boundary line behind a Lamorinda-area ranch, where the original redwood has aged out at the posts and the stringers, sits at the top. Most repairs we schedule finish in one to three days of on-site work. Call (888) 419-3650 for a free on-site estimate.

How our fence repair process actually runs
Repair isn’t a scramble-and-patch job. Done right, it’s a sequence, and knowing the sequence is how you avoid paying twice for the same stretch of fence.
Stage 1: The on-site inspection (day 1, roughly 45 – 60 minutes)
We walk the whole fence line, not just the broken part. Posts get a push test and a probe at the soil line, because in Walnut Creek a post that looks solid above grade is often soft six inches down. You’ll get a written line-item estimate before anyone touches a board, so you’re deciding from a real number, not a verbal guess.
Stage 2: Demolition and post extraction (day 1, half a day)
Failed boards and panels come off first, then the bad posts. Concrete-set posts from the 1960s and 70s tract homes here are usually the slow part, since the original footings were set deep and wide. We haul everything away the same visit. You decide at this point whether to salvage usable boards or replace full sections for a consistent look.
Stage 3: Footings, posts, and framing (day 1 – 2)
New posts get set in concrete and plumbed. We over-build the footing depth, because Walnut Creek’s clay-heavy soil moves with the wet-dry cycle and shallow footings are why so many fences lean after a wet winter. Stringers and rails go up next. If a section is shared with a neighbor, this is when you’ll want to confirm the boundary line before we commit posts to the ground.
Stage 4: Boarding, gates, and hardware (day 2 – 3)
Boards go on, gates get hung and adjusted so they swing true, and hardware is set with the gate’s weight in mind. A heavy gate sagging six months later is almost always a hinge or post problem decided at this stage, not a board problem.
Stage 5: Final walkthrough and sign-off (day 3)
We walk the line with you, check every gate, and confirm the finished height and alignment. Anything that isn’t right gets fixed before we leave. The work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The repair options you’ll choose between
Most fence repair decisions come down to how much of the run you’re touching and what you’re repairing it back to. Here’s the honest trade-off on each:
- Post-and-section replacement in kind: matches the existing fence, cheapest path, and the right call when only one or two posts have failed. Catch: if the rest of the fence is the same age, you may be back in a couple of years for the next weak point.
- Full-run rebuild with new posts and reusing sound boards: gives you a solid structural spine without paying for all-new material. Suits older redwood runs that are still sound in the boards but failing at the ground.
- Repair with cedar or pressure-treated pine: cedar holds up beautifully and looks right on a Walnut Creek ranch property, but it costs more. Pressure-treated pine is the workhorse choice and the better value when budget is the driver.
- Composite or capped board repair: worth it on a fence you plan to keep for decades, since it won’t rot or need staining. Higher upfront cost, and it only makes sense if the frame underneath is sound.
- Gate and hardware replacement: a new gate frame, hinges, and latch is often the fastest fix on a fence that’s otherwise fine. Heavy gates need heavier hardware, and that’s a spec decision, not a cosmetic one.
If the existing fence has reached the point where repair no longer pays, that’s the moment to step back and look at the wider project. We cover that in our Fence Installation in Walnut Creek page, and our Fence Installation service has the full scope.
What Fence Repair costs in Walnut Creek, CA
Expect $3500 – $9000 for a typical fence repair in Walnut Creek, with most jobs landing in the middle of that band. Here’s what pushes a job toward one end or the other:

- Linear footage and post count: the single biggest lever. A 60-foot run with two failed posts is a different job than a 200-foot boundary with eight.
- Existing condition: dry-rot that’s spread into the stringers, or posts set in deep original concrete, adds labor hours.
- Material grade: pressure-treated pine at the low end, cedar or composite at the high end, and that gap widens as the run gets longer.
- Access and slope: hillside lots in the Diablo Valley foothills mean more hand-carrying and more careful footing work.
- Gates and hardware: a heavy gate with quality hardware adds to the number, but a poorly hung gate costs you more over time.
A written estimate from us itemizes posts, boards, hardware, labor, and haul-away. Upfront pricing, no surprises: the number you see is the number you pay, and it doesn’t move once work starts. The estimate is free.
See the difference
Before
After
Before
After
Before
AfterWhat Walnut Creek homes specifically do to this job
Walnut Creek’s housing stock shapes fence repair here in ways you won’t see in newer subdivisions elsewhere. Much of the city is 1950s – 1970s single-story ranches and split-levels, and many of those fences are original to the house. That means we’re regularly working on redwood that’s fifty-plus years old, where the boards still look fine in the middle but the posts have rotted at the soil line. The hot, dry summers and mild, wet winters here drive that failure pattern: the ground swells and dries, posts shift, panels lean, and by the time a homeowner notices, two or three posts are gone.
Hillside properties carry an extra consideration, because wildfire risk in the surrounding hills makes fire-resistant fencing and defensible-space compliance worth planning for when you’re already rebuilding a stretch. In neighborhoods like the ones around the Ygnacio Valley and Rudgear corridors, shared boundary fences are common, and confirming the property line before posts go in saves a headache later. If your fence repair is part of a bigger backyard project, homeowners often pair this with ADU Design & Permitting in Walnut Creek, and the same holds true for Garage Conversion ADU in Walnut Creek. We cover the full Walnut Creek area, including ZIP codes 94596, 94598, 94597, and 94595.
Serving Walnut Creek, CA – Our Local Coverage Area
We serve Walnut Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Fence Repair in Walnut Creek
A typical fence repair in Walnut Creek takes one to three days of on-site work, depending on how many posts and sections are involved. Small post and gate repairs can finish in a single day. Call (888) 419-3650 for a timeline specific to your fence.
Most like-for-like fence repairs don’t require a permit, but repairs that change height, footprint, or placement near a property line can trigger one. We confirm what your specific job needs and pull what’s required before work starts. Call (888) 419-3650 and we’ll walk through your situation.
Yes. In most cases we can replace only the failed posts and boards and keep the sound sections, which keeps cost down. Whether that’s the right call depends on how much of the run has aged out at the ground. Call (888) 419-3650 for a free estimate that tells you which path actually makes sense.
Fence repair in Walnut Creek runs $3500 – $9000 for most jobs, with small post and gate repairs at the low end and longer runs with new cedar or composite toward the top. You’ll get a written line-item estimate before work begins. Call (888) 419-3650 for an exact quote.
Every fence repair we do is covered by our 730-Day Done Right Promise, so if something isn’t right, we make it right. That guarantee stands behind the finished work, not just the day it’s installed. Call (888) 419-3650 to schedule your free estimate.
Get a free fence repair estimate in Walnut Creek
If your fence is leaning, rotting at the posts, or losing boards, call (888) 419-3650 to schedule a free on-site estimate for fence repair in Walnut Creek. A live person answers 24/7, we walk the line with you, and you get a written line-item estimate before anything starts. Background-checked, uniformed technicians on every job. Upfront pricing, no surprises.
Written by the team at Groundwork Construction Co.