Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Pleasant Hill: What It Costs and How Long It Takes
A tub-to-shower conversion in Pleasant Hill runs $3,500 to $10,000 and usually takes 5 to 10 working days once the permit clears. The job means pulling the old tub and its surround, reworking the valve and drain to shower height, waterproofing the wet area, and setting a new shower pan and walls. Most Pleasant Hill homes we open up still have their original 1950s to 1970s plumbing behind the tub, so the first day is often where surprises live. Call (888) 419-3650 and we’ll walk your bathroom and give you a written number.

What actually happens between demo day and your first shower
This isn’t a five-stage sales funnel. It’s the sequence a real conversion follows, and each stage is where you make one decision that locks in cost.
Stage 1: Tear-out and the truth behind the wall (1 – 2 days)
We pull the tub, surround, and any old drywall or cement board down to the studs. This is where we find out whether the drain is cast iron or ABS, whether the valve is original or has been swapped, and whether there’s water damage at the tub apron. You decide nothing yet – you just get the honest report before we quote the fix.
Stage 2: Rough plumbing and electrical (2 – 3 days)
The tub drain sits low; a shower drain sits at the pan. That means re-plumbing the drain line and raising the valve to shower height, plus adding a dedicated circuit if you want a heated floor or a lighted niche. You choose fixture finish and valve brand here. If the wall behind the tub is load-bearing or the drain is slab-embedded, this is the stage that adds days.
Stage 3: Waterproofing and inspection (1 – 2 days, plus inspection window)
We install a bonded waterproofing membrane or a pre-sloped pan system, then the rough plumbing gets inspected before anything gets closed up. This is the step that separates a conversion that lasts 25 years from one that leaks in year three. Pleasant Hill’s building department wants to see it, and we schedule that inspection as part of the job.
Stage 4: Tile and finish (3 – 5 days)
Wall tile, pan tile or a solid-surface pan, grout, and trim go in. You’ve already picked tile and fixtures in stage 2, so this stage runs without decisions slowing it down. Curing time for thinset and grout is real – we don’t rush the first shower.
Stage 5: Glass, trim, and walkthrough (1 day)
Enclosure, showerhead, grab bars if you want them, and a final inspection. We walk it with you and hand over the written workmanship guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make (and what each one costs you later)
Most of the price swing in a conversion isn’t labor – it’s what you pick. Here’s the honest trade-off on each.
- Acrylic or fiberglass pan and surround: the fastest, cheapest route, often $3,500 – $5,500 all in. Cleans easily, but it flexes, it can crack at the drain, and it looks like a hotel bathroom. Fine for a rental or a quick flip; less so for the shower you’ll use for 20 years.
- Tile pan with a bonded waterproofing membrane: the durable middle ground, roughly $6,000 – $8,500. More grout lines to maintain, but it can be repaired and re-grouted instead of replaced.
- Full porcelain or ceramic tile walls to the ceiling: adds $1,000 – $2,500 over a partial-height install. Better moisture control in a small Pleasant Hill bathroom where steam has nowhere to go.
- Frameless glass: a real upgrade in how the room feels, $800 – $2,000 of the budget. Heavier, needs solid blocking behind the tile.
- Bench, niche, and grab bars: $300 – $900 combined. Aging-in-place buyers should budget the grab bars now – retrofitting blocking later means opening the wall again.
We stock KraftMaid and Kohler lines through our brand partnerships, so finish and fixture choices come from catalogs we already trust, not whatever the supply house has on the shelf that week.
What Tub-to-Shower Conversion costs in Pleasant Hill, CA
The realistic range for a tub-to-shower conversion in Pleasant Hill is $3,500 to $10,000, with most full-tile jobs landing between $6,000 and $8,500. A simple acrylic conversion in an intact bathroom can come in near the bottom. A job that uncovers rotted framing, moves the drain, or adds glass and tile to the ceiling pushes toward the top.
Four things move the number:

- Size and configuration: a standard 60-inch alcove is the cheapest to convert. A tub in a corner or with a window in the shower wall adds framing and waterproofing detail.
- Existing condition: original 1960s cast-iron drain lines, galvanized supply pipes, or water damage behind the tub add $500 – $2,500.
- Relocating plumbing or electrical: moving the drain or adding a circuit costs more than keeping the wet wall where it is.
- Material grade and glass: the tile, pan, and enclosure choices above are the single biggest lever you control.
A written estimate from us includes demo, rough plumbing, waterproofing, tile or pan install, permit and inspection coordination, and cleanup. It doesn’t include hidden structural repair or a changed fixture selection – and we tell you that up front rather than surprising you mid-job. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Pleasant Hill homes specifically do to this job
Pleasant Hill is a built-out, post-WWII Contra Costa suburb. Almost all the work here is remodel and rebuild rather than new construction, which means the bathrooms we open are original mid-century stock. The dominant pattern is the 1950s – 1970s single-story ranch, and behind those tubs we routinely find galvanized supply lines, cast-iron drains, and a valve that’s been patched at least once. Homes near the open-space ridges backing the oak-studded hills also sit on hillside or engineered foundations where the drain runs under a slab, which changes how much plumbing we can move without breaking concrete.
The city’s small, strict permitting culture matters too. Pleasant Hill inspects the waterproofing and rough plumbing before close-up, and we build that inspection window into the schedule. That’s why we quote 5 to 10 days rather than promising a weekend job. Because the city sits on the Concord fault, older bathrooms sometimes need a closer look at how the shower pan and tile tie into the framing, especially after a seismic retrofit – a detail flat-land neighbors in Concord and Walnut Creek’s newer edges don’t face the same way. Zip 94523 covers the whole city, from the homes near downtown to the hillside lots above the open space.
If the conversion is part of a wider scope – new vanity, new tile floor, better lighting – that pulls in Bathroom Remodeling in Pleasant Hill, and we handle both under one permit and one crew. Homeowners planning exterior work alongside often pair this with Metal Roofing in Pleasant Hill or Tile Roofing in Pleasant Hill. For the full menu of bathroom services we offer across the area, see our Bathroom Remodeling service hub. We cover all of Pleasant Hill and the surrounding Contra Costa communities, including Concord, Walnut Creek, Alamo, and Bay Point.
Serving Pleasant Hill, CA – Our Local Coverage Area
We serve Pleasant Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Tub-to-Shower Conversion in Pleasant Hill
Most conversions take 5 to 10 working days from demo to final inspection. The low end is an acrylic conversion in an intact bathroom; the high end includes tile to the ceiling, glass, and a permit inspection window. Call (888) 419-3650 for a schedule built around your bathroom.
Yes. Moving or reconnecting the drain and valve is plumbing work, and Pleasant Hill requires a permit and an inspection of the rough plumbing and waterproofing before the walls close up. We pull the permit and coordinate the inspection as part of the job. Call (888) 419-3650 to talk through the permit scope for your address.
Often, yes. If the existing drain can be reworked in place and the valve can be raised to shower height on the same wall, we leave the rough-in where it is, which keeps the job toward the $3,500 – $6,000 end. Moving the drain across the floor or relocating the wet wall adds cost and time. We confirm which route your bathroom allows during the estimate.
The range is $3,500 to $10,000, with most full-tile jobs at $6,000 to $8,500. Hidden water damage, a drain move, or premium glass and tile push the total toward the top. Call (888) 419-3650 for a written line-item estimate – estimates are free.
Every conversion is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on the waterproofing, tile, and plumbing we install for two full years. Call (888) 419-3650 and we’ll put the terms in writing before work starts.
Get a free estimate for your Pleasant Hill conversion
Call (888) 419-3650 for a free on-site estimate for your tub-to-shower conversion in Pleasant Hill. We’ll measure the bathroom, open nothing up yet, and give you a written line-item quote with the plumbing, waterproofing, tile, and permit spelled out. Calls are answered by a live person 24/7, and every technician who shows up is background-checked and in uniform. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off, so a bigger conversion stays manageable.
Written by the team at Groundwork Construction Co.