Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Pleasant Hill: What the Job Actually Involves
Vanities, tile and fixtures work in Pleasant Hill typically runs $9,000 – $28,000, and most of that money lands in the wet area: the vanity and its plumbing, the tile on floor and walls, and the fixtures you touch every day. A straight fixture-and-vanity swap can finish in under a week; tile that means new backer board, waterproofing and layout takes two to three. Call (888) 419-3650 and we’ll scope it on site.

How We Sequence the Work, Stage by Stage
Bathroom surface work goes wrong when the order gets rushed. Here’s the order we hold to, and what you’ll be deciding at each point.
Stage 1: Measure, scope, and layout (day 1, half a day)
We measure the room wall to wall, check whether the floor is level enough for large-format tile, and pull the shutoffs to see what the existing supply lines look like. You’ll decide the vanity width and whether it’s freestanding or built-in. This is the day to settle tile size, because a 12×24 format and a 3-inch hex change the prep and the schedule.
Stage 2: Demo and substrate (days 2 – 3)
Out comes the old vanity, the toilet if we’re tiling under it, and any failed backer. We inspect what’s behind it: water staining, soft drywall, a flange that’s been leaking quietly for years. You approve any hidden repair before we close it up. Schluter waterproofing membrane goes down over cement board on the wet walls and the shower pan, and it cures before a single tile is set.
Stage 3: Tile setting (days 4 – 6)
Floor tile first, then walls, then the shower. We set with a consistent grout line and check lippage as we go, not after. Grout and sealant come last in this stage so the joints cure undisturbed. On Pleasant Hill jobs we often schedule tile for the middle of the week so the cure time doesn’t eat a weekend.
Stage 4: Vanity, fixtures, and trim (days 7 – 9)
The vanity goes in, then the faucet, the drain, the toilet, and the shower trim. You’ll choose fixture finish here if you haven’t already: brushed nickel and matte black hold up best to hard water spotting, polished chrome shows every drop. Grohe and Toto are the two lines we fit most often because their cartridges and flush valves are serviceable years down the road.
Stage 5: Inspection and walkthrough (day 10)
If the scope triggered a permit, we schedule the inspection and meet the inspector on site. Then we walk the room with you: every grout line, every fixture, every door swing. You sign off, and the 730-Day Done Right Promise starts the day we hand you the keys back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions on this job come down to four material choices. Here’s the honest trade-off on each, in the order people usually make them.
- Vanity type and top. A stock freestanding vanity runs $800 – $3,000 installed and gets you a finished room fast. A built-in with a Cambria or quartz top costs more but fits an oddly sized alcove and resists the staining a painted MDF top won’t. If the room is 5 feet wide, the built-in is usually the right call.
- Tile material. Porcelain is the workhorse: dense, water-resistant, and $4 – $12 per square foot for mid-grade. Natural stone (travertine, marble) looks warmer and costs $10 – $30 installed, but it needs sealing every year or two and shows etching from shampoo bottles. Ceramic is the budget pick and fine on walls, thin on floors.
- Fixture finish and brand. Toto and Grohe sit in the sweet spot of serviceable and durable. Sterling is a solid value line for tubs and surrounds. Finishes range from chrome to matte black, and the practical difference is how much water spotting each one hides.
- Waterproofing system. Schluter is the standard we specify on wet walls and pans. A roll-on membrane costs less upfront but takes longer to cure and is less forgiving at corners. This isn’t a place to save $200.
What Vanities, Tile & Fixtures Costs in Pleasant Hill, CA
Plan on $9,000 – $28,000 for the full scope: vanity, tile on floor and shower walls, and all fixtures. That’s a real range, not a placeholder, and here’s what moves a job from the bottom of it to the top.

- Room size and tile area. A 5×8 hall bath and a 10×12 primary bath are different jobs. Every extra square foot of wall tile adds material and labor.
- Existing condition. Rotted subfloor, a failed shower pan, or galvanized supply lines that crumble when touched all add scope. We quote hidden repair as a line item, not a surprise.
- Moving plumbing or electrical. Relocating the drain for a new vanity position, or adding a GFCI outlet, pushes cost up. Keeping fixtures in place keeps the number down.
- Material grade. Porcelain versus natural stone, stock vanity versus custom, entry-level versus premium fixtures. Each step up is real money.
- Permit scope. A cosmetic refresh may not need one. Moving a drain or adding a circuit does, and that adds inspection time and fees.
Your written estimate itemizes the vanity, tile, fixtures, prep, waterproofing, and any permit. It doesn’t cover structural surprises we can’t see until demo, and we tell you that upfront. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Pleasant Hill Homes Specifically Do to This Job
Pleasant Hill is a built-out, post-WWII Contra Costa suburb, and most of the bathrooms we open here sit in 1950s – 1970s single-story ranch and Eichler-adjacent tract homes. That matters for tile work. Original mid-century baths often have a shallow, daylight-style or slab-on-grade foundation, and we regularly find mud-set beds, aging galvanized supply lines, and cast-iron drains that have been quietly seeping for decades. The city’s small-city permitting culture means a drain relocation or a new circuit gets reviewed closely, so we build that timeline into the schedule. Homes near the open-space ridges along the oak-studded hills also run into fire-resistant detailing expectations on exterior-facing work that flat-lot blocks near downtown don’t face the same way. When the tile work is part of a bigger Bathroom Remodeling in Pleasant Hill, we sequence the trades so the fixtures and tile land last and the room isn’t torn up twice.
Serving Pleasant Hill, CA – Our Local Coverage Area
We serve Pleasant Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Pleasant Hill
Most jobs run 7 – 10 working days from demo to walkthrough. A vanity-and-fixture swap without new tile can finish in 3 – 4 days; a full tile floor and shower adds a week. Call (888) 419-3650 for a schedule based on your room.
A cosmetic refresh usually doesn’t, but moving a drain, adding an electrical circuit, or relocating the toilet does. We tell you which side of that line your job falls on before we quote, and we pull the permit when it’s needed. Call (888) 419-3650 to talk through your scope.
Yes, and that’s the most common way we work. Keeping the vanity, toilet, and shower in their existing positions keeps the drain and supply lines untouched and holds the project to the low end of the $9,000 – $28,000 range.
The full scope runs $9,000 – $28,000, with the vanity, tile area, and material grade driving the spread. A vanity-only install sits at $800 – $3,000 of that. Call (888) 419-3650 for an exact quote.
Every job we do is covered by our 730-Day Done Right Promise: if something isn’t right, we come back and make it right. That covers workmanship for two full years, and our technicians have up to 12 years of experience behind it.
Get Your Free Vanities, Tile & Fixtures Estimate in Pleasant Hill
We’ll come to your Pleasant Hill home, measure the room, look at what’s behind the old tile, and give you a written line-item estimate you can hold us to. No pressure, no vague bids. Calls are answered by a live person 24/7, and we also offer 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 419-3650 to schedule.
Written by the team at Groundwork Construction Co..