Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Antioch Owner’s Guide
A full American Standard kitchen remodel in Antioch runs $14,000 to $45,000 installed, with most projects landing between $22,000 and $32,000 once you factor in cabinets, counters, and the plumbing fixtures American Standard is known for. American Standard doesn’t make a kitchen “part” the way it makes a toilet fill valve – what you’re really shopping is the fixture package: the faucet, the sink, and the supply connections, matched to cabinets from KraftMaid, Cambria or Silestone counters, and a layout that fits your actual square footage. Most Antioch owners land on this page after one of two things happens: a twenty-year-old American Standard faucet starts weeping at the base, or a kitchen remodel bid comes back vague enough that they want real numbers before they sign anything.
We’re an independent service provider, not affiliated with American Standard. Our technicians have up to 12 years of experience matching fixtures to the cabinet runs and counter cuts we install across Antioch, from the older ranch homes off G Street to the newer builds out toward Hillcrest Avenue.
Key Takeaways
- Installed American Standard kitchen remodels in Antioch: $14,000 – $45,000
- Smaller galley kitchens run $9,000 – $20,000
- Cabinet installation alone: $4,000 – $13,000; countertops $2,000 – $6,500
- Every project carries our 730-Day Done Right Promise
- Calls answered by a live person, 24/7 – no voicemail
Which American Standard Models This Applies To
American Standard’s kitchen lineup splits into three buckets that matter when you’re ordering parts or planning a swap. The Colony Pro and Fairbury single-handle faucets are the most common in Antioch homes built through the 1990s and 2000s – they use a ceramic disc cartridge that’s model-specific, not interchangeable with the cheaper Colony base series. The Austin and Bristol pull-down models (roughly 1.5 to 1.8 GPM) show up in newer remodels and take a different cartridge assembly than the single-handle lines. If you’re replacing a sink rather than a faucet, American Standard’s Cambridge and Portsmouth drop-in sinks come in undermount and top-mount variants with different rough-in hole patterns – a 33-inch drop-in won’t fit a cut-out sized for a 32-inch undermount, and that quarter inch is where a weekend project turns into a countertop repair.
To identify what you have, shut the water off, look for the model stamp on the faucet body under the handle or on the tailpiece beneath the sink, and measure the sink cut-out corner to corner. OEM cartridges for American Standard run $18 to $45 depending on the series. Quality aftermarket equivalents (Danco, for one) run $8 to $15 and hold up fine in most cases – but for anything under a decade old still on a factory warranty, OEM is the safer call. Skip the bargain-bin universal cartridges; they’re the single biggest reason we get called back to a faucet we just touched.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
- Water pooling at the faucet base. The cartridge O-ring has dried out or the disc has scored. This is the most common American Standard faucet failure we see in Antioch kitchens, usually after seven to twelve years of daily use.
- A handle that won’t shut off cleanly. Sediment has scored the ceramic disc inside the cartridge. Antioch’s water runs moderately hard, and that mineral load accelerates the wear.
- Low flow at the pull-down sprayer. The diverter in the spray head has failed or the screen is clogged. On the Bristol and Austin lines, this often means replacing the spray head assembly rather than the whole faucet.
- Cabinets that have swelled or delaminated near the sink. A slow faucet leak you never noticed has been soaking the cabinet floor for months. This one is the expensive symptom – the cabinet repair often costs more than the faucet.
- Countertop separating from the cabinet run. Caulk failure at the backsplash or an improperly shimmed base. Once water gets behind the counter, the fix moves from a $20 tube of caulk to a backsplash replacement in the $800 to $2,500 range.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing in Antioch depends on what’s actually being replaced. A faucet-and-cartridge swap is a one-visit job. A full kitchen remodel is a weeks-long project and priced accordingly.
| Scope | Installed Range (Antioch) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet grade and linear feet, counter material (Cambria quartz sits at the high end, Silestone mid-range), whether plumbing has to be relocated, and whether the layout changes. The number we quote is the number you pay – no change orders once work starts, unless you change the scope. Every project carries our 730-Day Done Right Promise: if it’s not done right, we make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
If you’re chasing a dripping American Standard faucet, you can safely shut the water off under the sink, pull the handle cap and retaining screw, and look at the cartridge to confirm the model. That’s the honest limit of what we’d suggest without a professional. Here’s where it goes wrong: a seized cartridge that a homeowner forces out with pliers can crack the faucet body, and a cross-threaded supply line under a full sink is a slow leak you won’t see until the cabinet floor is ruined. There’s no high-tension danger here – no springs, no gas, no live electrical panel – but there is a real risk of turning a $40 cartridge swap into a $600 faucet replacement plus cabinet repair. If the cartridge won’t release by hand, stop and call.
For anything past a cartridge, we recommend a professional. Call (888) 419-3650 to schedule your free estimate – a live person answers 24/7, and there’s no pressure and no sales pitch.
FAQs
Expect 10 to 15 years from an American Standard faucet in Antioch’s water conditions. The moderate mineral content wears ceramic discs and O-rings faster than soft-water markets, so a cartridge replacement at year 7 to 10 is normal, not a sign of a bad product.
Yes, and often we do. A scored cartridge, a failed spray head, or a worn O-ring is a repair, not a replacement. If the faucet body is sound and the finish is intact, we’ll fix the internals and save you the cost of a new fixture. Call (888) 419-3650 for a look.
A faucet or cartridge swap is a one-visit job, typically under two hours. A full kitchen remodel runs several weeks depending on cabinet lead times and counter fabrication. We’ll give you a clear timeline before we start, and a live person is available 24/7 if anything comes up along the way.
We source OEM American Standard parts through certified supply channels and verify the model against the stamp on your existing fixture before ordering. For older or discontinued series, we’ll recommend a quality aftermarket equivalent (Danco among them) and tell you plainly which one we’d put in our own home.
Ready to stop guessing? Call (888) 419-3650 for a free project estimate and design consult. Our team also handles KraftMaid, Cambria, and Silestone cabinets and counters as part of a full kitchen remodel, and we stand behind all of it for 730 days. From foundation to finish line, upfront pricing, background-checked technicians in uniform, and a live person on the phone whenever you call.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.