A Groundwork company - serving Antioch, CA

Barrette Bathroom Remodeling in Antioch, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Bathroom Remodeling: The Antioch Owner’s Guide

We install Barrette-compatible bathroom remodeling in Antioch, and a full bathroom remodel typically runs $9,000 to $28,000 installed, with smaller scopes landing between $5,000 and $12,000. Most Antioch homeowners don’t start with a budget question, though. They start when something fails: a vanity top that’s chipped at the edge and letting moisture into the cabinet, a shower surround that’s gone chalky and started to pit, or a glass shower door whose hinge has torn loose from the frame. Barrette products hold up well, but Antioch’s hard water and warm inland summers push surfaces harder than the coastal Bay Area does, and the failures show up as cracks, cloudiness, and loose hardware long before the rest of the bathroom is ready to be redone.

Call (888) 419-3650

Key takeaways:

  • Bathroom remodels in Antioch typically cost $9,000 – $28,000 installed; small bathrooms $5,000 – $12,000.
  • Barrette parts are matched by series and model number, not by photo, so identify the model before you order.
  • Glass and shower components are a safety item, not a weekend DIY fix.
  • Every project is backed by our 730-Day Done Right Promise.

Which Barrette Models This Applies To

Barrette makes a wide range of bathroom products, from cultured marble and solid-surface vanity tops to shower surrounds, tub decks, and glass shower enclosures. The version we need to identify depends on which of those you’re working with, and the only reliable way to do it is to find the model label. That label is usually stuck to the underside of the vanity top, inside the vanity cabinet on a side panel, or printed on the back edge of a shower surround panel. If the label is gone, we measure: the vanity top’s depth and width from cabinet edge to cabinet edge, the width of the existing shower opening, and the drain centerline offset. Those numbers, plus a photo of the profile and any visible stamp, are usually enough to match your piece to the right Barrette series.

Here’s where Antioch owners get tripped up. Barrette changes its molding, color batches, and glass patterns between production runs, and a part that “should fit” your model can arrive with a slightly different edge profile or a color that doesn’t match the batch in your bathroom. That’s why we match by model and, when the model is discontinued, confirm a compatible substitute before we order. On the OEM-versus-aftermarket question, our default is OEM for anything that carries water or a door: correct fit means fewer leaks and less costly callbacks. When a genuine part is discontinued, we source a quality equivalent and tell you plainly what changed. We also work with KraftMaid, Cambria, and Silestone on the rest of the bathroom.

We’re an independent service provider. We’re not affiliated with Barrette, and we don’t claim to be. What we do is match the right compatible part to your existing Barrette product and install it correctly.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Bathroom Remodeling Is Failing

Barrette products don’t usually fail overnight. They give you warning signs, and catching them early is what separates a $900 repair from a $9,000 remodel. These are the symptoms we see most often in Antioch:

  • Chalky or cloudy shower glass. Mineral scale from the water, especially on an older frameless panel, etches the surface and makes it impossible to clear with a squeegee. Once it’s etched, resurfacing fades fast, and replacement is usually the cleaner fix.
  • Cracks or chips at the vanity top edge. Barrette cultured marble and solid surface can chip at the front edge where it meets the cabinet. A small chip is a moisture entry point, and left alone it can swell the cabinet box underneath.
  • Loose or leaking shower door hinge. The hinge screws can pull free from the glass or the wall channel, so the door starts to sag. That’s a hardware and safety problem, not cosmetic, so don’t ignore it.
  • Discolored caulk or mildew in the surround seams. Failed caulk at corners lets water into the wall cavity. You’ll first notice it as a dark line, then as soft tile board or drywall around the surround.
  • Yellowed or pitted cultured marble. The gel coat on an older vanity top or tub deck can yellow and pit with age and sun exposure. Once the surface is pitted, it stains and can’t be cleaned back.

Replacement Cost & What’s Included

Here’s what Barrette bathroom work runs in Antioch, priced installed so there’s no guesswork:

Scope Installed Price Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

The price is driven mainly by scope: a single vanity top swap sits at the low end, while a shower replacement that involves glass, surround, and valve work pulls the number up. Every quote we give is upfront and line-item, so you see the part cost and the labor separately. If the number on the quote is the number we agreed to, that’s what you pay. Our technicians have up to 12 years of experience, and all work carries the 730-Day Done Right Promise. If it’s not done right, we make it right.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this you can check yourself with no risk: measure the vanity top, read the model label, photograph the cracked edge, and note whether the shower door hinge is loose. That information helps us quote accurately, and we’d rather you have it.

What we’d steer you away from is the install. Shower glass and enclosures are heavy, tempered, and unforgiving of a wrong measurement, and a hinge that’s misaligned or a panel that’s over-tightened can shatter. An electrical or plumbing change behind the wall is also a job for a licensed trade. We tell every Antioch homeowner the same thing: know your numbers, then let us handle the part, the fit, and the safety. Call (888) 419-3650 to schedule your free estimate; a live person answers around the clock.

FAQs

Get Your Barrette Project Priced in Antioch

Whether you’re facing a cracked vanity top, a shower door that won’t close right, or a full bathroom that’s due for a redo, we’ll give you an upfront, no-surprise quote and a part that actually fits. Calls are answered by a live person, day or night. Our Antioch crew is background-checked and uniformed, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 419-3650 today for your free estimate and design consult. From foundation to finish line, we’ve got your bathroom covered.

Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch