A Groundwork company - serving Antioch, CA

Boral Bathroom Remodeling in Antioch, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Bathroom Remodeling: The Antioch Owner’s Guide

Bathroom remodeling with Boral products in Antioch typically runs $9,000 – $28,000 installed, with smaller scope projects landing between $5,000 – $12,000. That range covers tear-out, waterproofing, tile, fixtures, and finish work on a full bath. Groundwork Construction Co. of Antioch is an independent service provider and is not affiliated with Boral.

Call (888) 419-3650

Owners usually discover a Boral material problem the same way: a hairline crack in a tile starts spreading after a wet winter, or a grout line near the shower pan turns dark and won’t scrub clean. Boral’s product lines are built for durability, but Antioch’s hard water and the seasonal swing between wet winters and dry, hot summers put real stress on bathroom surfaces. When the failure shows up, the question isn’t whether to fix it. It’s which part, which grade, and who installs it right the first time.

Key takeaways:

  • Installed Boral bathroom remodel cost in Antioch: $9,000 – $28,000.
  • Most Boral failures show up as cracked tile, failed grout, or water intrusion behind the wall.
  • We source the correct Boral product for your model, pull permitting where required, and back the work with the 730-Day Done Right Promise.
  • Call (888) 419-3650 for a free estimate. Live person, 24/7.

Which Boral Models This Applies To

Boral’s bathroom-facing product lines center on tile, stone, and cultured marble, plus the shower pans and vanity tops that pair with those surfaces. If your bathroom has Boral tile on the floor or walls, or a Boral cultured marble vanity top or shower surround, this page applies. Labels and packaging rarely survive a remodel, so the reliable starting point is physical identification: tile dimensions (Boral runs common formats like 12×12, 12×24, and 18×18), surface finish (matte, polished, honed), and shade name on the original spec sheet if you have it.

On the OEM-versus-aftermarket decision: for a true Boral match, the product number matters more than the brand name. Boral discontinues shades and formats periodically, and a “close enough” aftermarket tile in the same dimensions will often read as a slight color and sheen mismatch under bathroom lighting. If an exact Boral match isn’t available for a repair, the honest options are to re-tile the whole field or to shift to a complementary tile at a natural break line. We source through Boral’s distribution channels and independent suppliers, and we’re upfront when a discontinued shade means changing scope.

One compatibility gotcha worth knowing: Boral tile thickness varies by series, and a 3/8″ product won’t sit flush against existing 5/16″ material at a transition without proper substrate work. Measure before you buy anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Bathroom Remodeling Is Failing

  • Hairline cracks spreading across tile or grout: Often a sign of substrate movement or insufficient deflection under the tile. Antioch homes on expansive clay soils see this more than owners expect.
  • Grout that darkens and won’t clean: Usually water getting behind the tile, not topical staining. Sealed Boral tile doesn’t absorb on the surface – if it’s dark, the moisture is coming from the back side.
  • Loose or hollow-sounding tile: The thinset bond has failed. Tap a suspected area with a plastic handle; a hollow sound means the tile is no longer bonded and will eventually pop.
  • Cultured marble vanity top crazing or yellowing: UV exposure through an unshaded window and years of caustic cleaners degrade the gel coat. Once crazing starts, refinishing buys time but won’t stop it.
  • Shower pan flex or a soft spot near the drain: The pan has lost structural support or the waterproofing membrane has failed. This is the highest-priority symptom because water is already reaching the framing.

In Antioch, we regularly see tile failures near exterior walls where the temperature differential across the wall assembly is widest. The tile itself is rarely the problem. What’s behind it is.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Boral bathroom work in Antioch breaks down by scope. Our pricing is upfront and the number you see is the number you pay:

Scope Installed Range
Full bathroom remodel with Boral tile and fixtures $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Vanity installation $800 – $3,000

What drives you toward the top of a range: tile complexity (large-format tile and intricate patterns take longer and require tighter substrate prep), plumbing relocations, and whether the substrate is sound or needs repair once we open the wall. Every quote we write is line-item, so you see material cost, labor, and any permitting separately. No change orders from a vague base bid. The whole job is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.

DIY or Call Us?

There’s a short list of things you can safely check yourself: confirm the tile dimensions and look for a Boral label on a leftover box, tap suspect tile for hollow spots, and note where water is pooling or darkening. Photograph everything before you touch it.

Where it stops being a DIY call: any sign of water behind the tile, a soft shower pan, or a substrate that’s moving. Opening that wall without a plan to re-waterproof correctly will turn a small failure into a framing and mold problem. And a bathroom that’s been leaking slowly behind a wall for two years has a good chance of needing more than cosmetic work once it’s open. Our technicians have up to 12 years of experience with tile, waterproofing, and bathroom systems, and we pull the permits. If permitting or code compliance is part of your job, we handle that entirely.

Call (888) 419-3650 to schedule a free estimate. Live person, 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch