Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Antioch Owner’s Guide
We install Boral-compatible driveway and paver systems across Antioch, and a full paver driveway typically lands between $7,000 and $18,000 installed, depending on square footage, base prep, and border detail. Most of that work is not a same-day job, but small repairs, resetting, and joint re-sanding on an existing Boral surface are often handled in a single visit. Homeowners usually find out something is wrong the same way every time: a paver rocks underfoot by the garage apron, a hairline crack spreads through a segment near the street, or the sand joints wash out every time the winter rains hit.
Key Takeaways
- Boral pavers are modular segments, not a single monolithic slab – the “part” you’re replacing is usually one segment, a border course, or the base and joint system underneath it.
- Antioch’s shrink-swell clay soils are the number one cause of paver failure here, not the paver itself.
- Installed paver driveway range in Antioch: $7,000-$18,000. Repairs and resets price lower and are quoted line by line.
- Groundwork Construction Co. of Antioch is an independent service provider, not affiliated with Boral.
Which Boral Models This Applies To
Boral’s paver lineup covers segmental retaining walls and paving units in several profiles, and matching a replacement segment to your existing field matters more than most homeowners expect. The two lines you’ll most often run into on an Antioch driveway are the larger-format slab-style pavers, which read as a clean modern surface, and the smaller tumbled or cobble-profile units, which are set in a running bond or herringbone. Each profile has its own nominal face dimensions and thickness, and thickness is the one people get wrong. A 60mm paver and an 80mm paver are not interchangeable in a driveway that sees vehicle loads; the joint depth, bedding sand, and edging restraint are all built around that number.
To identify what you have, pull one loose or damaged segment and measure it on all three axes, not just the face. Then look at the edge profile – chamfered, tumbled, or straight – because a straight-edge replacement next to chamfered field pavers will look like a patch from twenty feet away. Color lots matter too; Boral color blends shift slightly between production runs, so a single replacement segment ordered today may sit a shade off from pavers laid years ago. On the OEM-versus-aftermarket question: Boral-compatible aftermarket segments exist and can work for a hidden repair under a planter or along an edge, but for anything visible in the main field, matching the original Boral profile and blend is the call we make. We don’t stock parts and we don’t carry paver inventory on a truck – we source to the specific profile and color you have, then install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
Paver systems fail from the bottom up, so the symptom you see on the surface is usually telling you about the base, the joints, or the edge restraint. Here’s what we see walking Antioch driveways.
- Pavers rocking or dipping underfoot. This almost always traces to base compaction that wasn’t deep enough or bedding sand that washed out. Once a segment moves, the ones next to it start migrating, so a single rocking paver becomes a five-paver repair fast.
- Joint sand washing out every rainy season. Antioch gets concentrated winter rain after long dry stretches, and that cycle pushes joint sand out of the seams. If the joints are open, water gets under the pavers and the whole system starts to shift.
- Hairline cracks spreading across segments. Cracks in the paver itself usually mean point loading from an unstable base underneath – the paver is the messenger, not the problem. Replacing the cracked segment without fixing the base just cracks the next one.
- Heaving or lifting near the street and garage apron. Our clay soils swell when wet and shrink when dry, and the transition zones at the driveway ends take the worst of it. Heaving there is a base and drainage story, not a paver defect.
- Edges spreading or the border course pushing out. Missing or failed edge restraint lets the field creep outward over time. Without restraint, no joint sand in the world will hold a driveway together.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what paver work actually runs in Antioch, quoted line by line so you see where the money goes.
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation (full) | $7,000-$18,000 |
| Driveway replacement (tear-out and rebuild) | $5,000-$14,000 |
| Paver patio installation | $3,500-$11,000 |
| Driveway sealing (protect the joint system) | $250-$700 |
| Concrete driveway alternative (for comparison) | $4,500-$12,000 |
What drives the range: square footage, how much base has to be excavated and re-compacted, whether the existing edge restraint can be reused, border and soldier-course detail, and whether the old surface needs hauling off. The parts-plus-labor split is written into the quote – you’ll see the paver cost, the base material, the joint sand, the restraint, and the labor as separate lines, not one lump number. Every job is covered by our 730-Day Done Right Promise, so if a joint washes out or a segment moves inside that window, we make it right. Upfront pricing means the number on the quote is the number you pay, and projects over $10,000 qualify for $1,000 off plus 0% financing for 18 months.
DIY or Call Us?
There’s a real split here. What you can safely do yourself: sweep and top off joint sand once a season, keep the driveway clear of standing water, pull one loose segment to measure and photograph it for a quote, and check whether the edge restraint is still pinned. That’s useful information to bring to a call.
Where DIY goes wrong: resetting a paver over a bad base without compacting in lifts or re-establishing the bedding layer. A segment pressed back into soft, wet clay will move again within one rainy season, and if you’ve already paid for the segment, you’ve paid twice. Repacking base, setting the sand bed, and restraining the edge is the part that makes a repair last, and it’s the part most homeowners don’t have the plate compactor or the patience for. If your paver failure involves a retaining wall segment or anything taller than knee height, stop and call a professional – wall units carry real load and a failed wall is a genuine safety issue, not a weekend project. Call (888) 419-3650 and we’ll walk through what you’re seeing and quote it line by line. Estimates are free.
FAQs
The paver units themselves routinely last 30-plus years – the failure point in Antioch is almost never the paver, it’s the base and joint system under it. Clay soil movement and winter rain cycling wear out base compaction and joint sand long before the pavers themselves give up, which is why joint maintenance and edge restraint matter more here than in drier climates. Call (888) 419-3650 for a free assessment of your specific driveway.
Yes, in most cases – a localized repair with matching segments, re-compacted base, and fresh joint sand handles the majority of what we see. Full replacement is the answer when the base has failed across most of the driveway or the edge restraint is gone entirely. We quote the repair and the replacement side by side so you can see both numbers before you decide. Call (888) 419-3650 for your free estimate.
Most localized repairs and joint re-sanding are completed in a single visit, and larger sections can run two to three days depending on square footage and how much base has to be reworked. Full driveway installations run longer and get scheduled with the weather – we don’t tear up a driveway right before a forecasted rain. Written timelines go into the quote up front. Call (888) 419-3650 to schedule your free estimate.
We source to your measured profile, thickness, and color blend rather than assuming a match – you pull one segment, we match it against the Boral profile dimensions and current color lot, and we confirm compatibility before anything gets ordered. Waiting on a color-lot match is normal and worth it, because a mismatched segment in the main field never stops looking like a patch. Call (888) 419-3650 and we’ll get the measurements started. We’re also your source for KraftMaid, Cambria, and Silestone work when a remodel is part of the plan.
Whether it’s one cracked segment near the garage apron or a full paver driveway rebuild, you’ll get a written, line-item quote, an honest read on whether repair beats replacement, and the 730-Day Done Right Promise behind the work. Calls are answered by a live person 24/7, and our background-checked, uniformed technicians have up to 12 years of experience. Call Groundwork Construction Co. of Antioch at (888) 419-3650 for your free estimate.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.