Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Windows & Doors: The Antioch Owner’s Guide
We install and replace Boxabl-compatible windows and doors for Antioch owners, and a standard window swap here typically runs $4,500 – $15,000 installed, while impact-rated units land at $8,000 – $25,000. Most jobs can be scheduled within days of your estimate, not weeks. We’re an independent service provider and are not affiliated with Boxabl.
Owners usually find out something’s wrong the same way. A window that won’t latch shut all the way. A door that scrapes the frame after the first hot week of summer. Fog trapped between the panes on a Casita unit that sat through a Delta breeze. Water staining the drywall under a corner that “looked fine” in spring. By the time you notice, the part has usually been failing quietly for a season or two.
Key Takeaways
- Boxabl windows and doors are sized to the unit’s steel frame, not to standard residential rough openings, so off-the-shelf replacements rarely drop in.
- Installed window cost in Antioch: $4,500 – $15,000 standard, $8,000 – $25,000 impact-rated.
- Contra Costa County heat and summer dust are the two biggest killers of seals and weatherstripping on these units.
- Every job is covered by our 730-Day Done Right Promise, with upfront pricing so the number you see is the number you pay.
Which Boxabl Models This Applies To
Boxabl’s production has centered on the Casita, and the window and door package on a Casita is built around the unit’s folded steel frame. That matters for Antioch owners because the frame dictates the opening dimensions, the mounting depth and the anchor pattern. A replacement part has to match the opening as built, not the opening as drawn on a generic spec sheet.
To identify what you actually have, look for three things. First, the data plate or label inside the unit near the electrical panel, which carries the model and build information. Second, measure the visible glass and the frame depth at three points per opening, top, middle and bottom, because a folded-and-unfolded steel frame can be a fraction off from one corner to the other. Third, photograph the hinge side and the latch side of any door, since hardware style changed across production runs.
The OEM-versus-aftermarket call is real here. A factory part is the safest dimensional match but comes with a lead time and a price premium. A quality aftermarket unit from a manufacturer like Andersen or Pella can be specified to the measured opening and often installs cleaner than a factory part on a unit that’s already settled. We quote both and tell you which one we’d put in our own unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Windows & Doors Is Failing
- Fogging or condensation between the panes. The insulated glass seal has failed and moisture is inside the unit. It won’t dry out on its own, and the glass has to be replaced.
- A door that drags or won’t latch in summer. Heat expansion against a frame that’s out of square, usually from settling on a pier-and-pad foundation. Adjusting hardware buys time; the frame alignment is the real fix.
- Daylight or a draft around the frame edge. Failed weatherstripping or a sealant joint that cracked through a dry Antioch summer. Cheap to fix early, expensive once water gets behind the frame.
- Water staining or soft drywall below a window. The flashing or the sill pan has failed and water is tracking inside the wall. This is the symptom that turns a window job into a repair job if you wait.
- Sticking, cracking or a hinge that pulls loose. UV degradation of the seal or hardware fatigue. Common on west-facing openings that take full afternoon sun in Antioch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Window replacement in Antioch runs $4,500 – $15,000 for a typical scope, and impact window installation runs $8,000 – $25,000. Door replacement sits inside the same window line depending on size and hardware. What drives the range: how many openings, whether the unit is impact-rated, glass package (dual-pane versus low-E versus laminated), and whether the opening needs to be re-squared before the new part goes in.
Every quote is line-item and upfront. You’ll see the part cost, the labor, disposal and any frame prep, and that’s the number you pay. No change orders for work we should have caught at the estimate. The installation is backed by our 730-Day Done Right Promise, so if a seal fails or a door starts dragging again inside that window, we come back and make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
There’s a short list of things you can safely do yourself on a Boxabl window or door. Check and replace weatherstripping. Clean and re-caulk a failed exterior sealant joint. Tighten or adjust a hinge or latch. Photograph and measure every opening before you call anyone, which saves time on the estimate.
Where it goes wrong is the actual swap. These units are built on a steel frame with specific anchor patterns, and a window or door installed without the right flashing and sill pan detail will leak, usually within the first rainy season. Glass units are heavy and awkward, and a dropped pane is a cut hazard. That’s the point where a trained installer earns their keep. Call (888) 419-3650 and we’ll tell you straight whether it’s a parts swap or a repair.
FAQs
Expect 15 to 25 years out of a quality window unit and 20-plus from a well-installed exterior door, but Antioch’s inland heat and summer dust push seal and weatherstrip failure faster than coastal climates. West-facing openings here often show seal failure a few years earlier than a shaded wall. Call (888) 419-3650 if yours is past that mark.
Sometimes, yes. Hardware, weatherstripping and exterior sealant joints are all repairable, and a door that’s merely out of adjustment can often be re-hung and re-aligned. Fogged glass and a failed sill pan are not repairable and need a replacement part. We’ll tell you which one you’re looking at on the estimate, free.
A single opening is usually a same-day job, and a full package of windows and doors on a Casita typically runs one to three days depending on how much frame prep the opening needs. Most jobs are completed in a single visit. Call (888) 419-3650 for a scheduling window.
We measure the opening as built, then spec either a factory-matched part or a quality aftermarket equivalent from a manufacturer like Andersen or Pella to those exact dimensions. You get both options quoted with the lead time and price for each. We don’t claim to stock parts or carry them on a truck; each part is ordered to your unit. Call (888) 419-3650 for an exact quote.
Whether your Boxabl needs one window or a full package, the first step is a free estimate with a written, line-item number and no surprises. We answer the phone with a live person 24/7, our technicians are background-checked and arrive in uniform, and every install is backed by the 730-Day Done Right Promise. We also service KraftMaid, Cambria and Silestone on other projects. Call Groundwork Construction Co. of Antioch at (888) 419-3650 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.