Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Antioch Owner’s Guide
CGI bathroom remodeling in Antioch runs $9,000 to $28,000 installed, and that figure covers demolition, tile, vanity, fixtures, waterproofing and finish work done by our background-checked technicians. When a CGI component in your bathroom fails, you’ll usually spot it before you hear it: soft spots in the floor near the shower, a vanity that rocks when you lean on it, grout cracking along the same line every few months, or water staining on the ceiling below. Most Antioch owners call after living with one of those symptoms for a season or two, and by then the fix has grown.
Which CGI Models This Applies To
CGI isn’t a single product line. The name gets applied to everything from prefab shower surrounds and vanity cabinet systems to the fixtures and trim packages sold under that label, and parts are not interchangeable across those families. Before you order anything, read the sticker on the back of the unit or inside the cabinet door. You want the model number and the series line, because a vanity door hinge from one CGI series won’t seat on another, and shower panel trim from a discontinued run won’t match current stock.
If the label is gone, measure instead. CGI vanity systems are typically sized by cabinet width and door overlay, and prefab shower panels are specified by base dimensions plus drain location. Bring those numbers to us and we can match them against what’s available. On the OEM-versus-aftermarket question, CGI’s own replacement parts are the safer bet on anything structural or water-sealing: surrounds, pans, and cabinet boxes. For hinges, handles, trim and cosmetic pieces, a quality aftermarket equivalent works fine and often costs less. We source both, and we’ll tell you which side of that line a given part falls on.
We’re an independent service provider, not affiliated with CGI, so we don’t sell proprietary parts under the brand umbrella. We match them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
- Grout cracking along the same seam, repeatedly. That’s usually movement in the substrate, not bad grout. Regrouting without fixing the cause means the crack returns within a season.
- Soft or spongy floor near the shower or tub. Water has gotten past a failed seal or pan and into the subfloor. This is the one symptom that gets worse fast, and it’s common in Antioch homes where decades of hard water and seasonal ground movement work on older seals.
- A vanity that rocks or a cabinet door that won’t stay aligned. Either the cabinet wasn’t shimmed and anchored properly, or the wall behind it has moved. Hinge replacement alone won’t solve it.
- Staining or bubbling on the ceiling below the bathroom. Water is traveling. Find it before it reaches framing, because a $300 seal job and a $4,000 subfloor rebuild start from very different places.
- Mildew returning in the same corner after every cleaning. Persistent mildew points to a shower pan or surround joint that isn’t sealing, not to your cleaning habits.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CGI bathroom remodel in Antioch lands between $9,000 and $28,000. A smaller bath runs $5,000 to $12,000. If you’re replacing just one element, walk-in shower installation is $4,500 to $12,000, a tub-to-shower conversion is $3,500 to $10,000, shower replacement is $3,000 to $8,500, and a vanity installation is $800 to $3,000.
| Scope | Installed range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
| Tile repair for failed surround or pan | $600 – $2,500 |
| Subfloor repair (soft spots discovered) | $1,200 – $4,000 |
What moves you up the range: fixture grade, tile size and pattern, whether the substrate has to come out, and whether plumbing has to relocate. What doesn’t move it: surprises at the end. Upfront pricing, no change orders you didn’t approve, and every job covered by our 730-Day Done Right Promise. Calls are answered by a live person, 24/7.
DIY or Call Us?
You can safely do some of this. Reading the model sticker, measuring your cabinet opening, checking under the sink for active leaks, and photographing what you find, all helpful. Replacing a handle, a hinge, or a towel bar? Go ahead.
Where it goes sideways: water-sealing components. Replacing a shower pan or surround panel yourself means cutting out the old one, checking the substrate underneath, and re-flashing the joints correctly. Get that wrong and the leak moves into your framing, where it stays quiet for a year before showing up as a $6,000 repair. If the floor is soft, stop. Don’t step on it repeatedly to “see how bad it is” – that’s how a small fix becomes a structural one. Same caution applies to anything connected to your supply lines or drain: shut the water off and call a licensed professional.
We’re licensed and insured, and estimates are free. Call (888) 419-3650 to schedule one.
FAQs
A properly installed CGI vanity cabinet or shower surround typically lasts 15 to 25 years. Surfaces fail before structures do: caulk and grout go first, around year 8 to 12 in Antioch’s hard-water conditions, and that’s the seal that protects everything behind it. Call (888) 419-3650 for a free estimate if you’re past the decade mark and seeing cracking.
Sometimes, yes. A single cracked tile, a failed hinge, a worn handle or a re-caulk around a joint are all repair-category jobs. A soft subfloor, a pan that’s leaking, or a cabinet box that’s swollen from moisture are replacement-category jobs, because the damage has moved past the surface. We’ll tell you which one you’re looking at during the estimate, and we won’t push a replacement on a repair.
A single vanity or shower replacement typically takes one to two days on site. A full bathroom remodel in Antioch runs one to three weeks depending on tile work, substrate condition and permit requirements. We schedule the start date up front and hold it.
We look up the model and series against manufacturer and distributor availability, then confirm the spec matches your existing dimensions before ordering. If the exact CGI piece is discontinued, we identify the closest compatible replacement and show you both options, OEM and quality aftermarket, before you commit. You see the part number and the price before we order anything.
No, not on the scope we quoted. If we open a wall and find something we couldn’t see during the estimate, we stop and show you before doing anything that changes the number. That’s the whole point of upfront pricing: the number you see is the number you pay. Call (888) 419-3650 for a free estimate and a written line-item quote.
Yes, for any bathroom work that requires one, which in Antioch typically means plumbing or electrical relocation and full remodels. We pull the permits and we pass the inspections. You get the signed-off documentation, and the work is backed in writing under our 730-Day Done Right Promise.
Ready to get it priced? Call (888) 419-3650 for your free estimate and design consult. We take $1,000 off projects over $10,000, and 0% financing for 18 months is available. From foundation to finish line, one contractor, one number, and a live person on the other end of it. We also work with KraftMaid, Cambria and Silestone on bath cabinetry and surfaces.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.