A Groundwork company - serving Antioch, CA

CGI Kitchen Remodeling in Antioch, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Kitchen Remodeling: The Antioch Owner’s Guide

Kitchen remodeling built with CGI cabinets and components in Antioch typically runs $14,000 to $45,000 installed, depending on layout, cabinet count, and countertop choice. We source CGI-compatible cabinet lines, install them, and stand behind the work with our 730-Day Done Right Promise. Most kitchen projects here aren’t a single-day job, and a scheduler will walk you through a realistic timeline when you call for your free estimate.

Call (888) 419-3650

Owners usually figure out something is wrong the same way: a door that no longer lines up with the frame, a drawer that drags against the box, or a hinge that has quietly lost its spring tension over a hot Contra Costa summer. Sometimes it’s a finish that has started to peel near the cooktop. The point is you’re not guessing. You’re pricing. Call (888) 419-3650 and we’ll get you a written, line-item estimate.

Which CGI Models This Applies To

CGI’s residential cabinet lines span framed and frameless construction, and that distinction is the first thing we check on any Antioch kitchen. Framed boxes use a face frame and hinge into the stile; frameless units mount hinges directly into the side panel. Ordering the wrong hardware or a replacement door built for the wrong construction is the single most common mistake we see from a homeowner who tried to source it alone.

To identify your exact CGI model, look for the manufacturer label inside the door or on the back of the drawer box, then measure the opening, the overlay, and the hinge bore diameter. Those three numbers matter more than the model name. If the label is missing, a photo of the hinge and a tape measurement is enough for us to match it.

On the OEM-versus-aftermarket decision: for a door or drawer face where the finish must match the rest of the run, stick close to the original line. For internal hardware, a quality aftermarket soft-close hinge or slide often outperforms the OEM part at a lower cost. We’re an independent installer and not affiliated with CGI, so we’ll tell you honestly which route saves you money on your specific cabinets. Groundwork Construction Co. of Antioch also installs KraftMaid, Cambria, and Silestone alongside CGI work, so nothing about the rest of your kitchen has to be matched to a stranger.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Kitchen Remodeling Is Failing

  • Sagging cabinet doors. A hinge that has lost its adjustment or a stile that has swelled from humidity. In Antioch’s dry-summer, wet-winter pattern, wood moves more than homeowners expect, and a door that only sags in spring is usually a moisture issue, not a broken hinge.
  • Drawers that stick or come off track. Usually a worn slide or a box that has racked out of square. If the drawer only drags at the back, the rail is the suspect; if it drags along one full side, the box itself is the problem.
  • Peeling or chipping finish near the range. Heat and steam degrade lower-grade finishes faster than the manufacturer’s spec sheet suggests. A localized repair is possible, but a full door replacement is the honest fix when the peeling has spread past a hand-sized area.
  • Water staining under the sink. A leak you didn’t catch has soaked the cabinet floor and, in bad cases, the subfloor. This one isn’t cosmetic. The cabinet base often has to be cut out and replaced before new parts go in.
  • Soft-close hardware that slams. The damping mechanism is the first thing to wear on any soft-close hinge or slide, usually after a few years of daily use. It’s a cheap part to swap, and it’s worth fixing early before the slamming shock damages the door or box.

Replacement Cost & What’s Included

Here’s what CGI kitchen work runs in Antioch, installed:

Item Installed Range
Full kitchen remodel (CGI cabinets) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the number is cabinet count, whether the layout changes, countertop material, and whether any plumbing or electrical has to move. Our pricing is upfront: the number you see is the number you pay, no change orders slipping in mid-job. Every job is backed by the 730-Day Done Right Promise, so if something isn’t right, we make it right.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

There’s a safe middle ground. You can check hinges, measure openings, and clean out a stuck drawer track without risk. What you shouldn’t do yourself is move a gas line to reposition a range, pull a permit-level electrical change, or tear out a cabinet run that hides water damage you can’t see yet. Those are where weekend projects turn into a wall opened up and a crew called in anyway.

Live person answers the phone 24/7 at (888) 419-3650. Every technician who shows up is background-checked and in uniform, and the estimate is free. There’s also $1,000 off projects over $10,000 and 0% financing for 18 months if the scope ends up larger than a single part.

FAQs

Schedule Your Free Estimate in Antioch

If your CGI kitchen parts are failing or you’re ready to remodel, call (888) 419-3650 for a free project estimate and design consult. We’ll walk the kitchen, tell you exactly what needs replacing, and put an upfront price in writing. From foundation to finish line, Groundwork Construction Co. of Antioch handles the job with brand partners like KraftMaid, Cambria, and Silestone available when you want to expand the scope. Call today and talk to a live person, any hour.

Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 419-3650
Local Service Coverage

Request a Free Estimate in Antioch

Tell us what you need - Groundwork Construction Co. of Antioch responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch