Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Windows & Doors: The Antioch Owner’s Guide
We install and repair CWS-compatible windows and doors for Antioch homeowners, and most partial replacement projects here land between $4,500 and $15,000 installed depending on how many units and whether framing is involved. Full impact-rated packages with CWS-spec glass run $8,000 to $25,000. CWS products are common in Antioch’s 1970s through 1990s subdivisions, and the failure pattern almost always starts the same way: a bedroom slider that suddenly needs two hands and a hip check to close, or a window crank that spins but doesn’t move the sash.
Which CWS Models This Applies To
CWS has made a wide range of aluminum and vinyl window and door lines over the years, and the model tag on your unit is the part number we work from. Look for a sticker in the top track of a sliding window or on the hinge side of a door jamb. If the sticker is gone or faded, we measure the rough opening and the glass thickness instead, since CWS aluminum sliders from the 1980s often use a thinner profile than the vinyl replacements sold today. That thickness difference is the compatibility gotcha: a standard big-box sash won’t seat in an older CWS frame without adapter hardware.
On the OEM-versus-aftermarket call, CWS-specific hardware is worth it when the frame is sound. Aftermarket rollers and rollers with adjustable height are fine for sliders, but panes, balances, and patio door handles should be matched to the original CWS profile. We order the right part rather than force-fitting a universal one, and we’re an independent service provider, not affiliated with CWS.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Windows & Doors Is Failing
- Sliding door drags or jumps the track. Worn steel rollers flatten over time and the door drops to the lower track edge. Republic-style guide blocks and roller assemblies are usually the culprit, not the frame.
- Window won’t stay up. On CWS double-hungs, the coil balance has failed or an operator arm has bent. You’ll notice the sash creeps down within seconds of release.
- Crank spins without moving the sash. The operator gear has stripped. Common on casement windows facing the afternoon sun, which gives them more expansion cycles over the years.
- Draft or condensation at the weatherstrip. The seal has compressed and pulled away from the jamb. In Antioch’s hot dry summers followed by wet winters, weatherstrip shrinks and cracks faster than in milder climates.
- Water staining at the sill or fog inside the glass. Either the sill gasket has failed or the insulated glass unit has lost its seal. Fogging means glass replacement, not a fix in place.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed window replacement in Antioch runs $4,500 to $15,000 for standard full-house jobs, and impact window installation runs $8,000 to $25,000. The range depends on unit count, whether the frame stays (insert) or gets rebuilt (full-frame), and glass spec. We price parts and labor separately so you see exactly what the hardware costs. Every job includes old-unit haul-away, resealing, and a walkthrough with us. The work is backed by our 730-Day Done Right Promise, so if a hinge or seal fails inside two years, we make it right at no charge to you.
DIY or Call Us?
Checking is safe and smart: you can look for the model sticker, test whether the sash moves freely, and wipe the track to see if a roller is cracked. Replacing a roller on a sliding door is doable if the door lifts out and you have a helper. What goes wrong is the trim and framing side – reseating a sash in a CWS aluminum frame without cracking the 30-year-old gasket, or replacing a balance coil without hurting the operator. And if your CWS door is a sliding glass door, it moves on hundreds of pounds of load – a dropped sash is a genuine injury risk. Call (888) 419-3650 for a free estimate, and we’ll tell you honestly whether it’s a part swap or a larger repair.
FAQs
Expect 20 to 30 years for the unit and 10 to 15 years for the hardware and weatherstrip in Antioch’s climate. Weatherstrip and rollers are the first to go because of dust and heat cycling. After that, fogged glass units start showing up. Call (888) 419-3650 for a free assessment.
Often, yes. A failed roller, balance, operator, or weatherstrip on a sound CWS frame is a repair, not a replacement. Glass replacement is the line – a fogged or cracked unit gets new glass or a new sash, and we’ll tell you which makes sense. Call us to schedule a free walkthrough.
A single roller or operator swap is typically one visit, often under two hours. Multi-unit jobs or full sash replacements usually run a half-day to a full day. We confirm timing on the estimate so there’s no surprise.
We match the part number on your unit’s tag to the correct CWS profile, then order from a supplier that handles that line. If the tag is gone, we measure and pull a sample part to confirm fit before ordering. We’re an independent service provider and not affiliated with CWS – we work from the hardware itself.
Antioch homeowners near the river and out toward the hills get the same treatment: we look first, quote the exact part and price, and put it in writing. If your CWS window or door is sticking, fogging, or won’t stay closed, call Groundwork Construction Co. at (888) 419-3650 for a free estimate. We also service KraftMaid, Cambria, and Silestone cabinets and counters if a project grows into the kitchen. No-hassle upfront pricing, live person on the phone 24/7, and the 730-Day Done Right Promise behind every install.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.