Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Antioch Homeowners Choose Dvele Construction
Groundwork Construction Co. of Antioch provides independent construction, repair and remodeling service for Dvele homes in Antioch, California – kitchens, bathrooms, roofing and finish work on panelized and modular houses that were built in a factory and finished on site. What makes our Dvele work different is that we plan around how these homes were assembled: we know where panel seams fall, how the mechanical chases run, and why factory-set openings don’t always match what the slab delivered. We are an independent contractor. We are not affiliated with, authorized by, or endorsed by Dvele. Call (888) 419-3650 and a live person answers, any hour.
Antioch has its own reasons to care about this. Here on the Delta, at the foot of the East Bay hills, we work with expansive Bay Area soils, a high water table along the San Joaquin River waterfront, and a housing mix that runs from 1950s to 1970s ranch tract homes on the flats to 1980s to 2000s hill subdivisions. Dvele homes sit in that same context, and the movement and moisture that work on the older flats show up differently in a home with factory tolerances held to a millimeter. We also service KraftMaid, Cambria, Silestone and Kohler products inside these homes, and the rest of our Antioch clients come to us for those same brands in stick-built houses.
Why Trust Groundwork Construction Co. of Antioch for Your Dvele Construction?
Our technicians have up to 12 years of experience, and the ones who work on Dvele homes have learned the specific habits of panelized construction – not drywall and framing as usual. That matters because Dvele builds to tight factory tolerances. Panels arrive square; sites don’t. The reconciliation happens in the field, and it’s the part of the job that goes wrong most often when a contractor treats a Dvele home like a conventional one.
We keep a working knowledge of the Dvele lines: the fully prefabricated panelized home with factory-set structural openings, the volumetric modular home with factory-installed mechanical chases, the net-zero-ready package with pre-wired solar conduit and battery provisions, and the modular ADU. When we open a wall, we know what we’re likely to find behind it. We also work warranty-safe. We don’t cut into structural panels without a plan, we don’t seal over penetrations in ways that trap moisture, and we don’t substitute parts that would give Dvele a reason to deny a claim on a component we touched.
Every project is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. Pricing is upfront, the number you see is the number you pay, and we pull permits and pass inspections. Calls come in to a live person 24/7. Our technicians are background-checked and arrive in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Antioch
These are the failures we actually see on Dvele homes in Antioch. They come from the meeting point between factory precision and site conditions, and each one has a recognizable cause.
- Hairline cracking at panel joints. Drywall seams where two factory modules meet and then connect to site-built work move as the house goes through its first hot Antioch summer and cool fog-influenced winter. The seam itself is rarely the problem – the tape and finish system applied on site usually is. A flexible re-tape and re-finish holds; a rigid patch cracks again within a season.
- Roof penetration and eave leaks on low-slope and standing-seam assemblies. Dvele flashes these at the factory, but crane set and site stitching disturb them. We routinely find flashing that wasn’t lapped correctly after set, or a gutter line and eave closure that never got sealed. It usually shows first as water staining on a ceiling near a mechanical penetration.
- Cabinets and quartz counters that gap at the wall. Factory-set openings are plumb within one tolerance. The site slab or subfloor often isn’t. When a KraftMaid run and a Cambria or Silestone top get installed against an out-of-square wall, the full-height backsplash run opens a gap. The fix is scribe and filler work planned in advance, not a fat bead of caulk.
- Mechanical chase and plumbing stub misalignment. On modular Dvele homes, chases are installed in the factory. Once the shell is set, stub locations don’t always line up with the rough-in plan, which forces us to relocate a vanity wall, an island, or a shower valve wall before tile goes up. Catching it at layout saves the whole bathroom budget.
- Panel-set window and door seals that fail at the frame. Windows set into panels are sealed to factory spec, but site-side trim and backer work can bridge or stress the seal. We check frame-to-panel joints before any exterior finish goes on, especially on the wind-driven west and river-facing elevations where Delta dust pushes into every gap.
A Dvele owner typically notices a hairline crack running along a seam where two factory panels meet, or water staining at a roof penetration above a low-slope section. The usual cause is panel-joint movement combined with site-applied flashing that wasn’t lapped correctly after crane set. A qualified local pro will open the joint, re-tape and re-finish with a flexible system, then re-flash the roof penetration with compatible metal and sealant and check the gutter line and eave closure before closing anything up.
Dvele Parts & Our Repair-vs-Replace Approach
Dvele doesn’t sell consumer finish parts, and that shapes how we approach every job. Chasing proprietary components for a fixture or a trim piece is a losing game. The honest approach is to match the home’s specified fixtures and finishes with OEM-equivalent components from the brands actually named in the spec – KraftMaid cabinetry, Cambria or Silestone countertops, Kohler, Toto or Delta fixtures, and GAF or Owens Corning roofing. Those are the parts that were supposed to be there in the first place, and they’re the parts that hold up.
We don’t claim to stock Dvele parts locally, and we won’t pretend otherwise. Every job is sourced to the spec, and we tell you at the estimate where each component comes from.
On repair versus replace, our stance is simple. Flashing, joints and trim get repaired – those are fixable and re-flashing is reliable work when it’s done to the right lap detail. Replacement is the right call when panel-set windows or roof sections have failed seals that can’t be re-flashed with confidence. We’ll tell you which one you’re looking at, in writing, before any work starts. Call (888) 419-3650 for a free estimate and a straight answer on which path makes sense.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We open the area – a panel joint, a roof penetration, a cabinet run – and trace the symptom to its actual source. Hairline cracks, staining, and gapping counters each have more than one possible cause on a Dvele home, and guessing wastes money.
- 2
Scope and pricing. You get a written line-item estimate with the finish schedule named: which cabinet line, which countertop brand, which roofing assembly. Upfront pricing, no surprises.
- 3
Repair or install. Flashings are re-lapped to the correct detail. Panel joints are re-taped and finished with a flexible system. Cabinets and tops are scribed and fitted to the site reality, not forced to factory lines. Walk-in shower conversions get proper waterproofing behind the tile, which is the part most conversions skip.
- 4
Test. Roof penetrations get a water test before the ceiling goes back. Shower valves and pans get checked under pressure. Doors and windows get operated and checked for seal integrity.
- 5
Warranty and final walkthrough. We close the job with a walkthrough and put the 730-Day Done Right Promise behind the workmanship in writing.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Antioch
We handle Dvele panelized single-family homes, modular homes delivered as volumetric boxes with factory-installed chases, net-zero-ready packages with pre-wired solar conduit and battery provisions, and modular ADU packages. On those homes, our three deepest sub-services are full kitchen remodeling, roof repair, and walk-in showers and shower remodeling – the three areas where Dvele’s factory tolerances meet site conditions most often.
Kitchen work means reconciling cabinet runs and quartz tops against site slabs. Roof work means re-flashing crane-set penetrations and low-slope or standing-seam assemblies. Walk-in shower conversions mean relocating valves and re-waterproofing correctly inside a factory-formed wet wall. We do all three, and we do them knowing the brands installed behind the walls.
In Antioch specifically, that means accounting for fast-drying concrete pours in summer, wind-driven Delta dust on every exterior detail, and seasonal soil swelling and shrinkage that pushes against foundations and drainage. Work that ignores those conditions doesn’t hold up here. Work planned around them does.
We Also Service These Brands
Groundwork Construction Co. of Antioch isn’t a single-brand shop. We install and service KraftMaid cabinetry, Cambria and Silestone countertops, Kohler fixtures, and the other premium brands our clients already know. If your Dvele home has these inside it, they’re our trade. If your neighbor’s conventional house does too, we’re just as at home there.
FAQs – Dvele Construction Service in Antioch
Yes, in the details. Dvele roof assemblies include factory-flashed low-slope and standing-seam sections that get disturbed during crane set and site stitching, and a roofer who doesn’t know to check those lap details will leave leaks behind. We open and inspect every penetration and eave closure before we call the roof done. Call (888) 419-3650 for an estimate.
Because factory-set openings are plumb within one tolerance and the site slab or subfloor usually isn’t, so a KraftMaid run and a Cambria or Silestone top open a gap at the wall when they’re installed without scribing and filler planning. It’s fixable, and it’s fixable without tearing out the cabinets. Call (888) 419-3650 for a free estimate on the correction.
Yes. The work is mostly about relocating the valve and re-waterproofing inside a factory-formed wet wall, which is different from opening up a site-framed bathroom. We plan the rough-in against the actual chase locations before tile goes up, so the conversion doesn’t reopen later. Call (888) 419-3650 and we’ll walk your layout.
Usually not. They’re almost always the finish system applied at the site joint – tape and mud that didn’t flex with the first summer and winter cycle – rather than a structural failure in the panels themselves. We open the joint and check before we say which it is. Call (888) 419-3650 for a diagnosis.
Repair if the flashing can be reliably re-lapped; replace if the seal at a penetration or a panel-set roof section has failed beyond what re-flashing can hold. We tell you which one you’re facing in the written estimate before any work begins. Call (888) 419-3650 and we’ll take a look.
It depends on the work, and our Antioch ranges are documented line by line. Below is what these jobs run. Call (888) 419-3650 for an exact quote – estimates are free.
| Service | Antioch Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Standing Seam Metal Roof | $15,000 – $40,000 |
The 730-Day Done Right Promise covers workmanship on all of it. Pricing is upfront, permits are pulled, and the offer stands: $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult.
Book Your Dvele Service in Antioch, CA
If your Dvele home has a crack, a leak, a gap or a bathroom you want reworked, call Groundwork Construction Co. of Antioch at (888) 419-3650. A live person answers 24/7. Estimates are free, pricing is upfront, and every job carries the 730-Day Done Right Promise. From foundation to finish line – built to last, backed in writing.
Written by the team at Groundwork Construction Co.