Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Kitchen Remodeling: The Antioch Owner’s Guide
We install IKO-compatible kitchen remodeling packages in Antioch, and most full kitchen projects here land between $14,000 and $45,000 depending on cabinet layout, countertop material and whether the room stays in its current footprint. We don’t do same-day kitchen remodels, and no honest contractor should promise you one; a real kitchen takes planning, permits where required, and a build schedule you can hold us to. What you get from us is a written line-item quote, upfront pricing with no change-order surprises, and the 730-Day Done Right Promise on the work.
Owners usually call us when a renovation other hands left something failing: a cabinet run that no longer closes cleanly because the wall behind it wasn’t straightened, a countertop seam that lifted on a hot Antioch afternoon, or an under-sink cabinet bottom that swelled after a slow drip. If an IKO-branded cabinet or system in your kitchen is the failing piece and you need it matched, priced and replaced, that’s exactly the call this page is built for.
A note on who we are: Groundwork Construction Co. of Antioch is an independent service provider. We’re not affiliated with IKO, we hold no IKO inventory, and we don’t carry parts on a truck. We source what your kitchen needs and install it.
Which IKO Models This Applies To
IKO builds kitchen cabinetry and related systems across several lines, and the fit problems aren’t the same from one to the next. The differences that matter most are box depth, drawer-glide and hinge boring pattern, and the cabinet series’ standard widths. A 12-inch-deep wall cabinet from one line won’t swap into a 24-inch-deep run without filler panels and a reworked face frame, and a hinge bore that’s drilled to a different pattern won’t take a replacement door without re-machining the panel. Get those three specs right and the match is straightforward.
The reliable way to identify what you have is the spec label on the inside of a cabinet door or the back panel of a drawer box. Photograph it, then measure the actual box yourself: exterior width, height, depth, and the center-to-center distance on the hinge screws. Those measurements carry more weight than any model name on a sticker, because IKO has revised lines over the years and a series name alone won’t tell you which revision you own.
On the OEM-versus-aftermarket decision: for anything visible and load-bearing, match the original IKO spec if you can source it, because color lot and finish sheen drift between runs and a mismatched door against an eight-year-old run reads as a repair. For hinges, drawer glides and internal hardware, a quality aftermarket equivalent at the same bore and load rating is a reasonable call and often faster to get in Antioch. We’ll tell you which side of that line each part sits on before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Kitchen Remodeling Is Failing
Failing cabinetry rarely announces itself. These are the symptoms Antioch owners describe to us, and what’s usually behind each one.
- Doors that swing open on their own or sag at the outer corner. That’s hinge fatigue or hinge screws backing out of particleboard that’s lost its bite, and re-driving the same screws into the old holes won’t hold for long.
- Drawers that scrape or jam through the middle of the travel. A glide has worn past tolerance or a side-mount runner has dropped, often because the box has been overloaded with cast iron and baking gear for years.
- A soft or spongy cabinet bottom under the sink. Slow drips from the supply line or the disposal flange soak the panel, and by the time it feels soft the substrate has already failed.
- Seams or edges lifting on a countertop joint. Inland Contra Costa summers swing the room temperature hard, and a joint that wasn’t bedded properly will telegraph that movement.
- Doors that no longer sit flush along a run. A wall that was never flattened before the cabinets went up, or a cabinet that’s pulling loose from framing, will show as a stair-step line across the face.
One more reality specific to this region: Antioch sits in a hot, dry summer pocket with colder winter nights, and that day-to-night swing works on cabinet joints, caulk lines and countertop seams year after year. A kitchen installed without allowance for that movement will show it faster here than in a coastal climate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what this kind of work runs in Antioch. Every figure is an installed range, meaning materials plus labor, not a parts-only number. A full kitchen remodel runs $14,000 – $45,000, and a smaller kitchen goes $9,000 – $20,000.
| Scope | Installed range in Antioch |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel | $14,000 – $45,000 |
What moves the number: cabinet grade and box counts, whether the layout changes (which pulls in plumbing or electrical), countertop material, and whether the wall behind the cabinets needs flattening first. Our quotes are line-item and upfront, so the number you see is the number you pay. Every job carries the 730-Day Done Right Promise, and right now you can take $1,000 off projects over $10,000 or use 0% financing for 18 months. We also work in KraftMaid, Cambria and Silestone when you want to change materials while the kitchen is open.
DIY or Call Us?
There’s a safe half and an unsafe half to this. You can photograph the spec label, measure the box, check the hinge bore pattern, and tighten exposed hinge screws. That’s genuine diagnostic work and it saves us time on the estimate.
Where it goes wrong: cutting a replacement door or drawer front to a bore that doesn’t match, swapping a glide for a lookalike with a different load rating, or trying to chase a soft cabinet bottom without finding the leak that caused it. Finish matching and color lot are the other trap; a part that measures right but reads a shade off looks worse than the failing piece did. Replacing a cabinet run also means disconnecting water and sometimes working around wiring, and that’s not work to improvise. Most single-part swaps are done in a single visit. Call (888) 419-3650 for a free estimate and we’ll tell you what’s actually failing before you buy anything.
FAQs
Expect 15 to 20 years from a well-installed cabinet in this climate, with hardware like hinges and glides wearing out sooner, often in the 7-to-12-year range. Antioch’s hot summers and dry air age joints and finishes faster than a coastal climate, so the box usually outlives the moving parts. If yours is in that window and the doors are misbehaving, call (888) 419-3650 for a free estimate.
Often yes, if the box itself is sound. Hinge replacement, glide swaps and re-securing a run to the framing are real repairs and usually the right first move. Once the substrate is water-damaged or the face frame is split, replacing that unit is the honest answer. We’ll tell you which case you’re in, and estimates are free: (888) 419-3650.
A single cabinet or door-and-drawer-front replacement is typically a single-visit job. A full cabinet run or a kitchen that includes countertop and backsplash work runs multiple days and we schedule it in writing. You’ll know the timeline before the first tool comes out. Call (888) 419-3650 for a free estimate.
We source to your measured spec rather than from shelf stock. That means matching your box dimensions, hinge bore and finish against OEM or a quality aftermarket equivalent and ordering it to the job. Being independent of IKO is exactly why we can match the right part instead of whatever’s on hand: (888) 419-3650.
Key takeaways: most Antioch kitchen projects run $14,000 – $45,000 installed; cabinet work alone is $4,000 – $13,000. Match by measurement, not by series name. Hardware fails before the box does. And the 730-Day Done Right Promise covers the work either way.
Ready to stop guessing which part failed? Call Groundwork Construction Co. of Antioch at (888) 419-3650 for a free estimate and design consult. A live person answers, day or night. We’ll measure your IKO kitchen, quote it line by line, and stand behind the work in writing.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.