Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Antioch Owner’s Guide
We install IKO-compatible windows and doors throughout Antioch, with most full window replacement projects running $4,500 – $15,000 and impact-rated installs running $8,000 – $25,000. Most single window or door swaps are completed in a single visit.
Here’s how Antioch owners usually find us. A window that used to close with a firm click now needs a shoulder behind it. The frame on the sunny side of the house has started to chalk and warp after a few summers of 100°F Contra Costa heat. Or the seal fails on a double-pane unit and you get that cloudy fog between the glass that no amount of cleaning will touch. Sometimes it’s simpler: a broken sash lock, a snapped hinge on a sliding patio door, a weatherstrip that’s dried out and letting in the Delta wind. Whatever the symptom, the conversation is the same. The part failed, and you want it matched to your IKO unit, priced honestly, and installed by someone who’ll stand behind the work.
Which IKO Models This Applies To
IKO is best known for roofing, but their window and door lines cover vinyl and aluminum-framed units in double-hung, slider, casement, and fixed configurations, plus hinged and sliding patio doors. The first job on any parts call is identifying exactly what you have, because IKO has revised frame profiles, sash balances, and hardware over the years, and a part that fits one production run won’t necessarily fit the next.
Start with the manufacturer’s label. It’s usually on the top or side of the sash, sometimes behind the screen track, occasionally inside the head jamb. The label carries the model or series number and, often, the original glass unit date. If the label is gone or unreadable, we measure instead: sash width and height, frame depth, glass thickness (usually 3/4 inch or 1 inch overall), and the balance or hinge type. That measurement set tells us which generation of IKO unit we’re dealing with.
The OEM-versus-aftermarket call matters here. Original IKO parts give you an exact fit, but lead times on older profiles can stretch. Quality aftermarket balances, locks, rollers, and weatherstrip are widely available and often the smarter choice for a 15-year-old unit, provided the specs match. We’re an independent service provider and not affiliated with IKO, so we have no reason to push one path over the other. We quote both and tell you which holds up better for the money.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
- Fogging or condensation between panes. The sealed glass unit has lost its argon and its desiccant has given out. That’s a seal failure, and it can’t be cleaned or resealed in place. The glass unit gets replaced.
- Sash won’t stay up, or drops on its own. The channel balance or spiral balance has lost tension, usually from worn springs inside the balance tube. In Antioch, the seasonal swing between hot summers and cool wet winters works balances harder than a mild coastal climate does.
- Drafts and water at the edges. Weatherstrip and glazing seals dry out and shrink with UV exposure. If you feel air or see staining at the frame, the seal has failed, and in a windy Delta neighborhood that shows up fast.
- Frame warping, sticking, or chalking. Vinyl and aluminum expand and contract with heat, and a frame that’s no longer square will bind a sash or door panel no matter how many times you adjust the hardware. This one tends to point to replacement rather than repair.
- Hardware that won’t latch or lock. Sash locks, rollers, hinges, and patio door handles take the wear of daily use. A worn roller or a misaligned lock is a genuine security issue, not just an annoyance, and it’s usually a straightforward part swap.
Replacement Cost & What’s Included
Here’s what these jobs run in Antioch, installed:
| Scope | Typical Installed Range |
|---|---|
| Single window part repair (hardware, balance, weatherstrip) | $150 – $450 |
| Full window replacement, several openings | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
| Patio door replacement (hinged or sliding) | $1,800 – $6,500 |
What drives the range: the number and size of openings, glass type (standard clear versus Low-E or impact-rated), frame material, and whether the job is a retrofit into existing openings or a full frame replacement. Part swaps sit at the low end. Whole-unit replacements sit at the top.
Parts and labor are quoted separately on every estimate so you can see what you’re paying for. Upfront pricing, no surprises. The number you see is the number you pay, and every install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s plenty an Antioch owner can check safely. Clean and inspect the weatherstrip, look for a readable label, test the balance by lifting the sash and letting it settle, and confirm the lock and latch line up. Swapping a sash lock or a handle on a patio door is within reach for a careful homeowner with the right part in hand.
Where DIY tends to go wrong: ordering a part off a model number without confirming the production run, forcing a sash balance and stripping the channel, or prying at a frame that’s already out of square. Glass unit replacement and any work on an out-of-square frame are jobs for a trained installer, because a bad fit leaks and you’ll be doing it twice. Our technicians have up to 12 years of experience with these units and work background-checked and in uniform.
Call (888) 419-3650 and we’ll walk you through what’s likely failing before anyone comes out. A live person answers, 24/7.
FAQs
A good quality IKO vinyl or aluminum window typically lasts 20 to 25 years, though hardware and weatherstripping wear out far sooner, often in 8 to 12. The heat on the sunny side of a house here shortens that. Sealed glass units tend to be the first thing to fail, especially in units that face west.
Often, yes. A balance, lock, roller, hinge, or weatherstrip failure is typically a straightforward part swap at $150 – $450 installed. Fogged glass units can sometimes be replaced without touching the frame. Warped frames and out-of-square openings generally mean the whole unit needs replacing. Call (888) 419-3650 and we’ll tell you which camp you’re in – estimates are free.
A single window part replacement usually takes under an hour and most jobs are completed in a single visit. A full window or patio door replacement runs a few hours per opening, and a multi-window job may span a couple of days depending on how many openings and whether any frame repair is needed.
We identify your model from the label or, if it’s gone, from measurements and hardware type, then source the part from suppliers who carry IKO-compatible components. That means original IKO parts where they’re available and quality aftermarket equivalents where they aren’t. We tell you which you’re getting and why on the estimate, and confirm the fit before anything gets ordered.
Get a Written Quote on IKO Windows & Doors in Antioch
Whether it’s a fogged glass unit, a patio door that won’t roll, or a full set of windows you’ve been putting off, we’ll give you a straight answer and a written quote. Windows and doors are one of our seven core services, alongside roofing, kitchens (we also work with KraftMaid, Cambria, and Silestone), baths, fencing, driveways, and additions. From foundation to finish line, built to last, backed in writing. Call (888) 419-3650 for a free project estimate and design consult, and ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.