Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Antioch Owner’s Guide
If you own a Jerith driveway or paver system in Antioch, we install and repair Jerith-compatible components here. Paver driveway installation in Antioch runs $7,000 – $18,000 installed, and paver patio work runs $3,500 – $11,000. We’re an independent contractor, not affiliated with Jerith, so we’ll tell you honestly whether an OEM part or a quality equivalent makes sense for your exact model.
Owners usually discover a failing component in stages. First come the loose pavers that wobble under a tire in the driveway. Then the sand joints start washing out after a winter rain. Then a paver cracks at the corner where a car parks, or the retaining edge lifts and the whole field starts shifting toward the street. Most people call us once the shifting reaches the garage apron.
Which Jerith Models This Applies To
Jerith paver systems come in interlocking profiles sold under different series names, and the geometry of each profile matters when you’re matching a replacement. The most common mix-up we see in Antioch: matching by color alone and ignoring the profile. Two pavers can look identical in a bin but differ in edge bevel, thickness, or interlock tab, and a mismatched piece won’t seat flush with its neighbors.
Before you order anything, find the part number. It’s usually stamped on the underside of a loose paver or printed on the corner of the original spec sheet. Measure the paver’s length, width, and thickness to the nearest millimeter, and note whether it has a spacer bar on the side. That thickness number is the gotcha: Jerith makes pavers at different gauges, and a 2-inch piece will not sit level against a 2-3/8-inch field. Your base course, bedding sand, and edge restraint all depend on matching the existing gauge exactly.
OEM vs. aftermarket for Jerith is a real decision. OEM gives you a guaranteed profile match and color continuity, but it can add lead time and cost. A quality equivalent works when the profile and gauge match precisely and the color is close enough for a repair that won’t be under direct lighting. For a small repair, the equivalent usually wins. For a large visible field, OEM keeps the finish consistent. We’ll quote both and show you where the savings and risks sit.
We also service KraftMaid, Cambria, and Silestone across our other trades, but for driveways and pavers, Jerith is the part we match here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
- Pavers rocking underfoot or under a tire. Loose pavers mean the bedding sand has shifted or eroded beneath them. This is the earliest warning, and it’s the cheapest stage to fix before the base starts failing.
- Sand washing out of the joints after rain. Missing joint sand lets water into the base, which leads to settlement and weed growth. Antioch’s winter rain and clay-heavy soil make this the most common early failure we see.
- Chipped or cracked paver corners. Usually caused by heavy point loads, a poor base, or a paver that was already compromised. One cracked corner can spread through the joint as the edge deteriorates.
- Edge restraint lifting or pulling away. The plastic or metal edge that holds the field in place is failing. Once that goes, the whole driveway can migrate toward the street over a season.
- Uneven settling and ponding water. Standing water after rain signals base failure, not just a sand problem. This one needs a deeper look, because patching sand over a failing base just delays the next repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Replacement of failing driveways and paver systems in Antioch falls into a few clear price bands. A paver driveway installation runs $7,000 – $18,000. A paver patio installation runs $3,500 – $11,000. Full driveway replacement runs $5,000 – $14,000, and if your base needs rework, that’s what drives the top of the range. Sealing and joint-sand restoration is a smaller job at $250 – $700.
What drives the price up: base excavation and re-compaction, the footage of new pavers, how much of the original field can be reused, and the grade work needed to correct ponding. What’s included in every quote from us: a written line-item breakdown, the pavers or parts sourced and matched to your existing gauge, base prep, compaction, edge restraint, joint sand, and cleanup.
Every job carries our 730-Day Done Right Promise. If the workmanship fails inside that window, we make it right. That’s the strongest warranty we offer, and it applies to driveway and paver work the same as everything else. Upfront pricing, no surprises: the number you see is the number you pay.
Call (888) 419-3650 for a free estimate and design consult.
DIY or Call Us?
You can safely do a few things yourself. Lift a loose paver and check the part number and thickness. Sweep a hose over the joints to find where water is pooling. Photograph the failing area and measure the damaged span. That information makes our quote faster and more accurate.
Where DIY goes wrong: resetting a paver over a failing base without fixing the base. It seats flat for a month, then rocks again. Edge restraint repairs also rarely hold without proper anchoring into the subgrade, and paver cutting on a curve needs a wet saw that most garages don’t have. One honest warning: if the base has failed or water is ponding against your foundation, that’s a structural issue, not a cosmetic one. Sand and patch won’t solve it, and it can damage your home’s drainage over a season. Don’t spend the weekend on a repair that fails again in a year.
Call (888) 419-3650 and we’ll tell you what’s actually wrong. Estimates are free, and most repairs get a same-week visit.
FAQs
A properly installed Jerith paver driveway typically lasts 20 – 30 years in Antioch’s climate, with joint-sand replenishment every 2 – 3 years and sealing every 3 – 5 years. The pavers themselves outlast the base and sand, which is what actually fails first. Antioch’s winter rain is the main enemy, and good drainage design during installation is what makes the long lifespan real. Call (888) 419-3650 to assess what stage yours is at.
Yes, individual pavers can be lifted and reset if the base beneath is still sound. A single loose paver takes an hour to fix. If several pavers in one area are rocking, the base has failed under the field and that section needs to be rebuilt, not just re-sanded. We inspect the base before quoting a repair, so you don’t pay for a patch that fails in a season. Call (888) 419-3650 for a free assessment.
A small repair, five or fewer pavers, is usually a single visit. A full driveway replacement in Antioch takes 2 – 4 days, depending on base work and paver quantities. Most jobs we run here finish in a single visit when the base is intact. We’ll give you a realistic timeline in writing with your quote. Call (888) 419-3650 to schedule yours.
We match by the part number stamped on your existing paver and by physical measurements: length, width, thickness, and profile. If the OEM part has a lead time, we’ll also price a quality equivalent that meets the same gauge and interlock spec, and you decide. We don’t guess on color or thickness, because a mismatch is visible and the base won’t sit right. Call (888) 419-3650 with your part number or a photo of a loose paver.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.