Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Antioch Owner’s Guide
If you have a Mr-Glass kitchen product that’s failing, we install and repair Mr-Glass-compatible kitchen components across Antioch, and full kitchen remodeling here runs $14,000 – $45,000 installed. A targeted component swap (a door, hinge, countertop section, or backsplash repair) sits far below that. Most Antioch owners find us the same way: a cabinet door that won’t sit flush, a drawer that drags, a countertop edge that’s chipped or separating, or a glass panel that’s fogged or cracked after a seasonal shift. One morning it worked. Then it didn’t.
Which Mr-Glass Models This Applies To
Mr-Glass kitchen lines cover cabinet door and drawer fronts, glass inserts, and several countertop and backsplash assemblies, and the part you need depends entirely on which line you own. Before we order anything, we identify your exact model three ways: the label inside the cabinet door or on the back of a drawer box, the printed spec sheet tucked under a shelf or in the sink base, and physical measurements (door width, height, thickness, hinge-bore spacing, glass panel dimensions). Guessing from a photo gets people the wrong part more often than not.
Here’s the compatibility gotcha that bites Antioch owners: Mr-Glass changed hinge-bore spacing and glass-panel thickness across production runs, so a door that looks identical to yours may not accept your existing hinges or fit the same frame opening. Measure the bore spacing, not just the door size. On the OEM-versus-aftermarket question, we source genuine Mr-Glass parts when they’re available and specify a matched aftermarket equivalent when they aren’t, and we tell you which one you’re getting and why before we order. KraftMaid, Cambria, and Silestone components follow the same identification process if your kitchen mixes brands, which many do after a partial remodel.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Door won’t stay aligned or sits proud of the frame. Usually worn hinges or a hinge plate that’s pulled loose from the cabinet box; the door itself is often fine.
- Drawer drags or binds halfway out. Failing drawer slides, or a slide that’s been overloaded and bent. Continued use wears the cabinet mounting holes.
- Glass panel is fogged, cracked, or rattling. Seal failure or a frame that’s shifted with humidity and temperature swings. Rattling means the panel has come loose from its seating.
- Countertop edge is chipped, separating, or lifting. Adhesive failure or impact damage at the edge; a lifting seam can let moisture into the substrate.
- Backsplash tile or panel is loose or grout is cracking. Movement behind the panel or failed adhesive, common in kitchens that see heavy steam and heat cycling.
In Antioch, we regularly see seal and adhesive failures on glass and countertop components after a dry, hot summer followed by cooler, damper fall weather. That seasonal swing works the joints harder than most homeowners expect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Component-level work in Antioch prices out like this, installed, parts and labor included:
| Item | Installed Range (Antioch) |
|---|---|
| Backsplash install or repair | $800 – $2,500 |
| Countertop install or replacement | $2,000 – $6,500 |
| Cabinet install or refacing | $4,000 – $13,000 |
| Kitchen island install | $3,000 – $10,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Full kitchen remodel | $14,000 – $45,000 |
What moves the number: part availability (genuine Mr-Glass parts can carry a lead time and a premium), whether the cabinet box or frame needs repair behind the part, and the finish or material you choose. You get one written, line-item quote before we start, and the number we quote is the number you pay. Every job is covered by our 730-Day Done Right Promise, so if a part we installed fails within that window, we make it right.
DIY or Call Us?
You can safely check a few things yourself: whether a door is out of alignment, whether a drawer slide is bent, and whether the model label is legible. Take those measurements and call. Where DIY goes wrong on Mr-Glass kitchen components is during installation. Cabinet doors and drawer boxes rarely fail alone; a misaligned hinge or a frame that’s shifted usually signals a cabinet box problem underneath, and bolting a new door onto a damaged box just moves the failure. Countertop and glass panel swaps involve weight, sharp edges, and adhesive work that has to be seated flat the first time. We’re an independent service provider, not affiliated with Mr-Glass, and our technicians have up to 12 years of experience matching the right part to the right model. Call (888) 419-3650 to schedule your free estimate.
FAQs
Most Mr-Glass kitchen components are built to last well over a decade with normal use, but hinges, drawer slides, and glass seals wear faster in a kitchen that runs hot and steamy. If your part failed early, the cause is usually a matching issue or an underlying cabinet problem, and we check both.
Often yes. A door can be re-hung, a slide re-seated, a chipped countertop edge refinished, and a fogged glass panel re-sealed. We tell you honestly whether a repair will hold or whether replacement is the smarter spend.
A single door, drawer, or backsplash section is usually a same-visit job. Countertop and larger cabinet work typically runs one to three days, and we confirm the schedule in your written quote before anything is ordered.
We identify your model from the label and measurements, then source genuine Mr-Glass parts when available or a matched aftermarket equivalent when they aren’t. You’ll know exactly what’s being ordered and the price before we proceed. Call (888) 419-3650 for an exact quote, and estimates are free.
Whether you’re looking at one failing cabinet door or planning a fuller kitchen update, the first step is a free estimate with no pressure and no surprises in the pricing. Reach us at (888) 419-3650, where a live person answers any hour of the day, and we’ll get the right part matched to your Mr-Glass kitchen.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.