Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Fence Installation: The Antioch Owner’s Guide
For a full Oldcastle fence installation in Antioch, most homeowners spend $3,500 – $9,000, depending on linear footage, material line, and how much site prep the yard needs. That figure covers materials and labor together, not a parts-only ticket. We’re an independent installer, not affiliated with Oldcastle, and we handle the whole job from post layout to final gate swing. Call (888) 419-3650 for a free on-site estimate.
Owners in Antioch usually discover a fence problem the same way: a gate that quits latching cleanly, a post that starts leaning after a wet winter, or a run of pickets that sags along a property line. That first sag or gap is your cue to look closer, because a fence that’s starting to fail usually tells you well before it falls over.
Key Takeaways
- Typical installed Oldcastle fence range in Antioch: $3,500 – $9,000.
- Our technicians have up to 12 years of experience matching material lines to real yards.
- Every job is backed by the 730-Day Done Right Promise.
- Upfront pricing, no surprises: the estimate is the number.
Which Oldcastle Models This Applies To
Oldcastle covers a lot of ground in residential fencing, and the material line drives everything: post spacing, rail dimensions, panel widths, and how the fence handles wind and soil. The common residential categories we install and repair around Antioch include vinyl privacy runs, composite and wood-look systems, ornamental aluminum and steel, and the picket and panel lines that fall under those families. The first job on any estimate is confirming which line you actually have.
You can identify your material line yourself before we arrive. Check the inside face of a post or rail for a stamp, embossed logo, or part number, and write down the panel width (most residential privacy panels fall between 6 and 8 feet). Measure the actual post-to-post spacing, not the panel face, because that difference is where mismatched parts come from. Photograph the cap, the gate hardware, and the bottom rail where it meets the post.
Where the OEM-vs-aftermarket call matters most is on older runs. When a specific Oldcastle profile has been discontinued or the exact color is unavailable, a compatible aftermarket rail or picket in the same dimension can keep an existing run intact instead of tearing it out. We’ll tell you plainly which route fits your fence and which one costs less over the long run. If you’re also planning interior work down the road, we install KraftMaid, Cambria, and Silestone too, but today is about your fence line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Fence Installation Is Failing
- Posts leaning after rain. In Antioch’s clay-heavy soils, winter saturation swells the ground and pushes under-set posts out of plumb. A fence that leans in one direction after a wet stretch usually points to shallow footings, not the material itself.
- Gates that drag or won’t latch. Hinge sag and post movement are the usual culprits, and a gate out of alignment often signals a post that’s shifted at the base. Left alone, the gate weight keeps pulling the post further out.
- Loose, rattling rails or pickets. Fasteners backing out or a top rail that’s worked free of its bracket shows up as a wobble when you push on the run. That looseness lets water into the joints, which speeds up the next problem.
- Cracks, splitting, or color fading on vinyl and composite. UV exposure in the East Contra Costa sun is hard on any fence material, and hairline cracks at post caps or panel edges widen with each hot-cold swing. Fading alone is cosmetic; cracking at stress points is structural.
- Rust bleed or loose ornamental panels on metal. Powder coat nicks at ground level or at welded joints let moisture in, and rust creeping from the base means the footing isn’t draining. Loose aluminum panels usually trace back to a failed bracket or a post that’s settled.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Oldcastle fence installation in Antioch runs $3,500 – $9,000 installed for a typical residential yard. What pushes a job toward the top of that range: total linear footage, material line (ornamental aluminum and steel sit higher than standard vinyl), number of gates, and site conditions like slope, rocky soil, or an old fence that has to come out first. Post footings set to depth, hardware, and cleanup are all included in the number we quote.
We give you a written, line-item estimate before any work starts: materials, labor, and tear-out listed separately so you can see exactly what you’re paying for. Upfront pricing, no surprises. Parts and labor are quoted together because a fence is only as good as its install, and a great panel on a bad footing fails fast.
All fence work is covered by our 730-Day Done Right Promise. If something we installed isn’t right, we make it right. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available if you’d rather spread the cost.
DIY or Call Us?
Some of this you can safely check yourself: walk the line for lean, push on posts to test for movement, look for rust or cracks, and photograph any identifying stamps on the rails and posts. That homework makes the estimate faster and more accurate.
What we’d steer you away from is digging and re-setting posts, pulling and re-tensioning gate hardware on a run that’s already shifted, or trying to correct a leaning structural post on your own. A post that’s waterlogged and half out of the ground can shift suddenly when you start prying, and a fence panel under load can drop on you. It’s not a job worth a bad back or a smashed gate. That’s where a trained installer saves you money, not costs you.
If your Oldcastle fence is sagging, leaning, or simply past its run, call (888) 419-3650 and we’ll get eyes on it. A live person answers, and the estimate is free.
FAQs
A properly installed Oldcastle fence typically holds up 15 to 25 years depending on material line, with ornamental metal often outlasting vinyl in this climate. The install quality – footing depth and post spacing – matters as much as the material, which is why we set footings to spec for local soil.
Often yes. A single leaning post, a sagging gate, or a damaged panel can usually be corrected without tearing out the whole run. We’ll tell you honestly whether a repair holds or whether the footing is too far gone – call (888) 419-3650 for a straight answer.
Most residential fence installations wrap up in one to three days depending on linear footage and site conditions like slope or old-fence removal. We give you a realistic timeline in the estimate, not a guess on the day of.
We identify your material line from the on-site stamp and measurements, then source the matching or compatible panel, rail, and hardware for your run. If the exact OEM profile is discontinued, we’ll find a compatible equivalent in the same dimensions and tell you the tradeoffs before you commit.
Call (888) 419-3650 to schedule your free estimate. We answer around the clock, and the quote comes in writing.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.