Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Bathroom Remodeling: The Antioch Owner’s Guide
We install Owens Corning-compatible bathroom remodeling systems in Antioch, and most full bathroom remodels here run $9,000 – $28,000 installed. Small bathrooms fall in the $5,000 – $12,000 range, and tub-to-shower conversions land around $3,500 – $10,000. Owens Corning’s role in a bathroom is the envelope and moisture-control layer, not the vanity or tile, so when a piece fails you usually discover it through a soft spot near the shower pan, a bubbling paint line on the shared wall, or a tub surround that feels spongy underfoot weeks after you noticed a hairline crack in the caulk joint.
Which Owens Corning Models This Applies To
Owens Corning bathroom products sit in two groups: the FOAMULAR rigid foam insulation boards used behind tub surrounds, on exterior bathroom walls, and in wet-wall assemblies; and the PINK fiberglass batts and acoustic panels used in interior partitions and ceilings. FOAMULAR comes in XPS grades labeled by compressive strength (the 250, 400, 600 and 1000 series) and thickness from 1/2 inch to 2 inches, and the number on the board is your compatibility key: a 1-inch 250 board won’t substitute cleanly where a 1/2-inch 400 board was spec’d without changing the wall depth and the way the cement board sits. If your existing board faces a shower, confirm the label reads “moisture-resistant” and check whether a foil or plastic facer is present, because mixed facers change how vapor moves through Antioch’s summer-dry, winter-wet cycle.
The OEM-vs-aftermarket decision is different here than with a mechanical part. For Owens Corning branded goods, we source the exact product class the spec calls for, because substituting a generic XPS board of the same thickness but different compressive rating is the single most common cause of a surround that flexes and cracks at the seams within two seasons. Groundwork Construction Co. of Antioch is an independent service provider, not affiliated with Owens Corning; we install and repair these systems and match them to your existing assembly. Bring us the label photo, the board thickness, and a measurement across the wet wall, and we’ll identify what belongs there. We also handle KraftMaid, Cambria and Silestone when the bathroom scope reaches cabinetry and counters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Bathroom Remodeling Is Failing
- Spongy floor or wall near the shower. Water has reached the substrate past a failed caulk joint or a gap in the moisture barrier, and the board has taken on water. Softness under a bare foot is the earliest sign, and it shows up months before visible damage.
- Bubbling or peeling paint on the shared wall. Vapor is moving through the assembly the wrong way. In Antioch, the winter wet season loads the exterior wall, and if the facer is missing or reversed, the paint on the interior side blisters.
- Hairline cracks at the cement board seams. A board that’s too thin for the span, or one installed over a flexing substrate, lets the seams open. Grout cracking that returns after every repair points back to the board.
- A musty smell that won’t clear. Trapped moisture behind the surround or insulation has no path out. Running the exhaust fan longer won’t fix an assembly with the wrong vapor profile, and the smell tends to come back every spring.
- Cold spots or condensation on an interior wall. Insulation has settled, compressed or was cut short around a plumbing penetration. Bare gaps around pipes in a wall that shares space with a wet area show up as condensation first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full bathroom remodels in Antioch run $9,000 – $28,000. What drives the number is the extent of the moisture repair behind the finish: swapping a compromised wet wall adds labor and board, while a layout change that moves plumbing pushes toward the top of the range. A small bathroom sits at $5,000 – $12,000, a shower replacement is $3,000 – $8,500, a walk-in shower installation is $4,500 – $12,000, and a vanity installation runs $800 – $3,000.
Our quotes are line-item and upfront, so you see the material cost and the labor separately, and the number you sign is the number you pay. Every job is covered by the 730-Day Done Right Promise, and we pull the permits your scope requires. Finishing and tile trades are part of the same quote, not a surprise line later.
DIY or Call Us?
You can safely pull a loose piece of trim, photograph the board label through an access panel, run the exhaust fan, and check the caulk joints around the tub with your hand. We encourage that, because it tells us exactly what we’re walking into. What goes wrong is the next step: cutting open a wet wall to “see how bad it is” before you know whether it’s load-bearing, cutting into a wall that hides a plumbing stack or wiring run, or sealing a moisture problem behind new cement board without correcting the vapor profile. That last one traps water and turns a small repair into a full gut. If a wall is soft or the smell won’t clear, stop and call us at (888) 419-3650. A free estimate costs you nothing and tells you whether you’re looking at a repair or a rebuild.
FAQs
Expect 20 to 30 years from a correctly installed FOAMULAR-backed wet wall with intact facers and a properly vented exhaust. Antioch’s dry summers and wet winters are hard on assemblies that aren’t vapor-detailed, and we regularly see failures at the 10 to 15 year mark where the board faced the wrong way. Call (888) 419-3650 for an exact quote on your bathroom, and estimates are free.
Often yes, if the damage is confined to a seam, a caulk joint or a small section of board. Repair is worth it when the substrate is still firm and the facer is intact; replacement is the honest answer when the board is soft across more than a few square feet. We’ll tell you which one you’re facing before any work starts.
A localized board or seam repair is typically a one to two day job, while a full wet wall rebuild runs several days depending on drying time and finish work. We schedule the inspection first, then give you a firm timeline in writing.
We match the exact Owens Corning product class by label, thickness and compressive rating, then order it to the spec your assembly calls for. We don’t stock parts or carry board on a truck, so the right material arrives for your job rather than a near-match. Call (888) 419-3650 to start with a free estimate.
Whether you’re repairing one wall or planning a full gut, the first call gets you a real number and a real plan instead of a guess. Call Groundwork Construction Co. of Antioch at (888) 419-3650 for your free estimate. A live person answers around the clock, every technician is background-checked and arrives in uniform, and we back the work with our 730-Day Done Right Promise. Ask about our 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.