Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors: The Antioch Owner’s Guide
We install and service PGT windows and doors in Antioch, with most full window replacements running $4,500 – $15,000 and impact-rated installations running $8,000 – $25,000 depending on count, glazing, and frame type. When a PGT unit fails, it’s usually a part that lets go before the glass does: a balance, a sash lock, a roller, or a weather seal. Antioch owners tend to find us after a window that once slid with two fingers starts fighting back, or after the first hard Delta wind pushes water past a sweep that’s been quietly crumbling for two summers.
- Key Takeaways
- PGT parts are model-specific. The series number on the AAMA label inside the frame decides what fits.
- Failed balances, locks, rollers, and sweeps are all replaceable without replacing the whole window.
- Installed repair pricing in Antioch ranges from $150 – $650 for hardware and seals, more when glass or a full unit is involved.
- Our technicians have up to 12 years of experience, and every job carries our 730-Day Done Right Promise.
Which PGT Models This Applies To
PGT makes several distinct product families, and parts do not cross between them. The WinGuard line covers impact-rated aluminum and vinyl units. The Premium Vinyl and Vinyl Series lines cover standard single-hung, double-hung, slider, and casement windows. The Estate Collection covers wood interior aluminum clad. Then there are the door lines: sliding glass doors, French doors, and hinged patio doors, each with their own hardware sets. A balance from a Vinyl Series single-hung will not fit a WinGuard impact unit, even when the windows look identical from across the room.
The label inside the frame or on the sash edge carries the series designation and often the original size callout. If the label is gone, we measure the sash, the frame opening, and the balance channel depth instead, because PGT has changed channel profiles across production years and guessing from the glass size alone leads to the wrong part. On the OEM-versus-aftermarket question: for balances, rollers, and weather seals, quality aftermarket equivalents from window-hardware suppliers are honest matches at better prices, and we say so. For sash locks, hinge sets, and anything tied to impact certification, we source OEM or certified-equivalent parts, because an uncertified lock on a WinGuard unit can void the impact rating you paid for. We’re an independent service provider and not affiliated with PGT; we work with their parts, not for them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Windows & Doors Is Failing
- The sash won’t stay up. A window that slides down on its own has a broken balance spring or a snapped balance cord. On PGT single-hungs and double-hungs the balance is a coil or block-and-tackle assembly inside the jamb channel, and when one side fails the sash tilts and drags.
- The lock won’t catch or feels loose. Sash locks and keepers wear at the contact point, and on impact-rated doors a misaligned lock means the unit isn’t sealing to its rated pressure. That’s a wind-driven rain problem in Antioch, where summer Delta breezes hit 30 mph without warning.
- The door drags or grinds on the track. Sliding glass door rollers flat-spot and corrode. In Antioch’s dry summers and damp winters, the steel rollers PGT used on some older units pit fast, and once a roller seizes it chews the aluminum track.
- Water shows up inside the track or on the sill. Failed sweeps, pile weatherstrip, and corner seals let water past. By the time you see the puddle, the weep holes are usually clogged with grit and the sill pan is holding water against the frame.
- Fogging between the panes. That’s a seal failure in the insulated glass unit, not a hardware problem. The fix is a replacement IGU matched to the PGT frame, and on WinGuard units it has to be impact-rated glass, not standard glazing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what PGT parts and service typically run in Antioch, installed:
| Work | Installed Price Range |
|---|---|
| Single balance, roller, lock, or sweep replacement | $150 – $400 |
| Full hardware set (all balances plus locks on one window) | $300 – $650 |
| Sliding door roller and track service | $250 – $600 |
| Replacement insulated glass unit (IGU) | $350 – $900 |
| Impact-rated IGU replacement (WinGuard) | $600 – $1,400 |
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
The range is driven by series (impact units cost more in parts), glass size, how many units are involved, and whether the track or frame needs repair alongside the part. We quote upfront pricing before we touch anything, the number you see is the number you pay, and every repair carries the 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself. Confirm the series on the frame label. Clean the weep holes and track with a brush and a shop vac. Tighten a loose sash lock screw, and look at the roller with a flashlight to see if it’s flat-spotted or just dirty. What we don’t recommend is pulling a sash out of a double-hung to get at the balance, or taking apart a sliding door to swap rollers. Balances are under spring tension, and on impact-rated units the sash is heavy and awkward, so a slip means glass on your floor or a hand in the wrong place. That’s the point where a trained technician saves you money. Call (888) 419-3650 and we’ll schedule a free estimate.
Frequently Asked Questions
Plan on 20 to 30 years for the frame and glass on a well-maintained PGT unit, with hardware and seals needing service far sooner. Balances typically last 10 to 15 years, and sliding door rollers on older units often fail in 8 to 12 as Antioch’s dry-season grit works into the track. When a part does go, call (888) 419-3650 for a free estimate on the fix.
Yes, in most cases a failed balance, lock, roller, sweep, or even a fogged glass unit can be replaced without touching the frame. On WinGuard impact units, replacement glass must be impact-rated to keep the certification intact, and we source it accordingly. Call (888) 419-3650 and we’ll tell you honestly whether a repair is the right call or a full replacement makes more sense.
A single balance, roller, or lock swap usually takes under an hour, and a full hardware set on one window runs one to two hours. A replacement insulated glass unit takes longer because of the glazing and sealing work, often half a day per unit, and most jobs are completed in a single visit. Call (888) 419-3650 to book a time.
We start with the AAMA label inside the frame, then measure the sash and channel if the label is missing or worn. From there we source OEM parts for locks, hinges, and impact-related hardware, and quality equivalent parts for balances and rollers when they’re an honest match. Call (888) 419-3650 and we’ll confirm the part before we quote.
We also work with KraftMaid, Cambria, and Silestone on other parts of the home, so if your window project turns into a kitchen or bath conversation, we can handle it from foundation to finish line. Groundwork Construction Co. of Antioch answers every call with a live person, 24/7, and our technicians are background-checked and arrive in uniform. Call (888) 419-3650 for a free estimate on your PGT windows and doors.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.