Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Antioch Homeowners Choose PGT Construction
We provide independent PGT window and door installation and repair in Antioch, and what sets our PGT work apart is focus: we know the WinGuard and Aluminum series line by line, including the failure points that show up in East Bay wind and weather. PGT builds serious impact-rated products, and we service them without cutting corners on parts or fit. One note up front, because it matters: Groundwork Construction Co. of Antioch is an independent PGT service provider. We’re not affiliated with, sponsored by, or authorized by PGT. Our technicians have up to 12 years of experience, and every job is covered by our 730-Day Done Right Promise. Call (888) 419-3650 and a live person answers, day or night.
Why Trust Groundwork Construction Co. of Antioch for Your PGT Construction?
PGT products have particular tolerances. WinGuard impact windows carry a laminated glass build that sits differently in the frame than standard dual-pane, and the aluminum series uses specific gasket and weep systems that determine whether the unit drains or holds water. Technicians who don’t work on PGT regularly tend to force-fit aftermarket parts into these channels, which is where leaks start. Our technicians know the difference between a WinGuard vinyl frame and a WinGuard aluminum frame by sight, and they know which fastener and sealant combinations keep the assembly weather-tight.
We source OEM-compatible parts and match the original profile whenever we can, which keeps your warranty intact and your fit correct. Where a line is older or discontinued, we tell you honestly and present the options. Warranty-safe service means we don’t modify a unit in ways that void coverage, and we document what we replaced and why. From foundation to finish line, one contractor handles the whole job, and it’s built to last, backed in writing. Estimates are free and priced upfront, with no surprises once work begins.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Antioch
Antioch sits on the Delta at the foot of the East Bay hills. That geography drives most of the PGT failures we see here: hot, dry summers with persistent afternoon winds off the river, fog-influenced winters, and driving rain that finds every gap in a weathered frame. These are the recurring problems:
- Degraded weatherstripping on WinGuard windows. The gasket compresses over years of thermal cycling, and once it flattens, wind-driven rain pushes past the sash. Homeowners usually notice it as a draft first, then as water staining on the interior drywall near the frame. A typical job starts with new weatherstripping, cleared weep holes, and a resealed frame perimeter. The Delta wind makes this worse on west- and south-facing walls, where the weather side takes the most abuse.
- Aluminum frame and hardware corrosion. Antioch’s marine-influenced air carries salt and moisture off the river, and aluminum frames and the hardware inside them oxidize faster than inland installations. We see pitted tracks, stiff latches, and rollers that bind. Cleaning alone doesn’t fix it. The hardware has to be replaced with corrosion-resistant components, and the track has to be re-treated so it doesn’t seize again the next winter.
- Misaligned or derailed sliding glass door rollers on the Aluminum Series. These doors are heavy, and the rollers carry the whole panel. Over time, a roller wears flat or a track fills with grit, and the door drops and drags. That misalignment stresses the frame and eventually breaks the seal. We adjust or replace the rollers and rebuild the track rather than assuming the door needs replacing.
- Fogging and seal failure in insulated glass units. When the seal around an IGU fails, moisture gets between the panes and the unit clouds. On PGT windows, this often shows as a milky band along one edge first, then spreads. It’s a sign the spacer and sealant have given out, and it costs you both visibility and energy performance.
- Frame and sill damage from clogged weep holes. A small problem with a real consequence. When weep holes fill with dust and debris, water that should drain out sits in the sill channel instead. Left through a couple of rainy seasons, that standing water rots the sealant, stains drywall, and can corrode the frame.
PGT Parts & Our Repair-vs-Replace Approach
Parts strategy drives the outcome on every PGT job. We source OEM parts when they’re available, which preserves the original fit and keeps you within the manufacturer’s warranty terms. On older or discontinued lines where OEM is scarce, we use quality aftermarket components that hold up over the long term, and we tell you when that’s the choice and why. We don’t claim to stock PGT parts locally; parts are ordered to fit the specific unit, not pulled from a shelf.
The honest call between repair and replacement depends on age, condition, and how widespread the failure is. A single failed IGU on an otherwise sound window is usually a repair. Frame damage or glass seal failure across several units is where replacement starts to make sense. We give you that assessment straight, backed by a written line-item quote. If you’re weighing the options, call (888) 419-3650 for a free estimate.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit at the frame, the sash, the gaskets, and the glass. On WinGuard units we check the weatherstripping compression and the weep holes; on Aluminum Series doors we check the rollers and track for wear and misalignment.
- 2
Repair or install. For a repair, we replace the failed component with an OEM or quality-matched part and reseal the perimeter. For an installation, we set the unit to the correct profile and tolerance so the frame sits square and the seals engage.
- 3
Test. We open and close the window or door through its full range, check that it latches cleanly, and water-test the perimeter seals and drain paths to confirm the unit is weather-tight.
- 4
Warranty and hand-off. We document what was replaced and why, hand over the paperwork, and confirm your coverage. The work is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Antioch
We work across the PGT lines that Antioch homes actually have. That includes PGT WinGuard Aluminum Impact Windows and PGT WinGuard Vinyl Impact Windows, both of which turn up heavily in this area; PGT Aluminum Series Sliding Glass Doors, a common candidate for roller and track work; and PGT Vinyl Series Single-Hung Windows, which we see in older neighborhoods. Beyond the window and door work, we also handle roof repair for the water damage bad window seals and clogged weep holes leave behind. If your unit is PGT, we know it, and if it isn’t, we’ve got a process for that too.
We Also Service These Brands
PGT is a big part of what we do, but it isn’t all of it. We also service other window and door brands, and our kitchen and bath work covers KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. One contractor, one point of contact, across every trade.
FAQs – PGT Construction Service in Antioch
No. We are an independent service provider, not authorized, sponsored, or affiliated with PGT. Our expertise comes from focused work on PGT products, not from any manufacturer agreement. That independence is why we can give you a straight repair-versus-replace answer.
We use OEM parts whenever they’re available, which preserves fit and warranty compliance. For older or discontinued PGT lines where OEM is scarce, we use quality aftermarket parts and tell you what we’re using and why. Parts are ordered to fit your specific unit. Call (888) 419-3650 and we’ll walk through the options for your product line.
Most repairs can be completed in a single visit once the parts arrive. A weatherstripping and reseal job is often done the same day, while roller and track replacements or IGU swaps depend on the part order. Installations take longer and depend on the scope. We’ll give you a clear timeline with your written quote. Call (888) 419-3650 for a free estimate.
We service and install PGT WinGuard Aluminum Impact Windows, WinGuard Vinyl Impact Windows, Aluminum Series Sliding Glass Doors, and Vinyl Series Single-Hung Windows. If you’re not sure which series you have, we identify it during the inspection.
Warranty-safe service does not void your coverage. We avoid modifications that void it, use OEM parts when available, and document what we replaced. Anything that could affect your coverage we flag before we start. Call (888) 419-3650 and we’ll explain what applies to your unit.
In Antioch, PGT impact window installation runs $8,000 – $25,000, and window replacement runs $4,500 – $15,000. Repairs like weatherstripping, roller replacement, or IGU work cost less and are quoted line by line. Those ranges reflect real Antoch-area pricing, and we quote upfront with no surprises once work begins. Call (888) 419-3650 for an exact quote; estimates are free.
| PGT Service | Typical Cost in Antioch |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
Book Your PGT Service in Antioch, CA
If you’re dealing with a fogged WinGuard unit, a dragging sliding door, or a window that leaks in the rain, we can help. Call Groundwork Construction Co. of Antioch at (888) 419-3650 for a free estimate. A live person answers 24/7, our technicians arrive in uniform and background-checked, and all work is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Antioch.