Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The Antioch Owner’s Guide
If you’ve got a Schluter system in a driveway or paver assembly and a part has failed, we install Schluter-compatible driveway and paver components across Antioch, and a typical repair or re-set runs within our standard driveway and paver pricing, with a full driveway build in the $7,000 – $18,000 range depending on square footage and base condition. Same-day service isn’t something we promise on planned hardscape work; we schedule around your estimate and materials, and we quote the work in writing before anyone touches the job.
Most Antioch owners don’t discover a failed Schluter component until something shows at the surface. Water pools where it never used to. A paver edges breaks loose after a wet winter. A trim channel lifts and the joint behind it darkens. Our technicians have up to 12 years of experience with these assemblies and know the difference between a surface problem and a failure happening underneath.
Groundwork Construction Co. of Antioch is an independent service provider and isn’t affiliated with Schluter. We work with the system, not for the manufacturer.
Key Takeaways
- Schluter-compatible driveway and paver repairs are priced within our standard hardscape ranges for Antioch, quoted upfront.
- Adhesion failures and drainage failures look similar at the surface but are fixed very differently.
- Every project is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space.
- Our team handles material sourcing so you’re not guessing at compatibility.
Which Schluter Models This Applies To
Schluter builds several families of products that end up in hardscape and paver work, and the right part depends on which one is in your assembly. Their tile and stone edge profiles (the Schiene, Quadec, and Jolly lines) are common on porch edges, driveway aprons, and step nosings. Their uncoupling and waterproofing membranes are typically under tile or stone surfaces at entryways and step landings. And their drainage and trim components show up at transitions where a paved surface meets a structure or a planted bed.
The compatibility gotcha: profile sizes are specified by the thickness of the tile or paver they edge, measured in millimeters. A profile spec’d for 3/8 inch material won’t seat correctly on a 3/4 inch paver, and the labeling on older stock doesn’t always match the metric spec stamped on the profile flange. Pull the piece and measure the reveal depth and the flange width before you call anyone. Bring a photo of the profile cross-section and a measurement of your paver thickness.
On OEM versus aftermarket: Schluter’s own replacement profiles are your best bet for a seamless match in color, finish, and dimension, especially on anodized and brushed finishes that need to match an existing run. A quality aftermarket equivalent can work fine on non-visible trim and on hidden membranes, where dimensional tolerances matter more than finish. The visible edge is where we usually recommend staying OEM. We don’t carry parts and don’t stock Schluter components; we source what’s needed against your specific assembly after measuring it in person.
If you’re also coordinating other premium finishes while we’re on site, we install KraftMaid cabinetry, Cambria quartz, and Silestone countertops through the same estimating process.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
- Efflorescence or white staining along the edge. That white powder is mineral salts pushed up as moisture moves through the assembly. It usually points to water getting under the membrane or into the base, not to the profile itself being defective.
- A lifted or rocking profile on steps or aprons. When an edge profile rocks under foot, the bond line has broken and water is driving into the joint on every rain. In Antioch’s clay-heavy soils, a base that shifts over a dry summer is the usual cause, and the profile is just the messenger.
- Darkened joints or damp-looking stone long after rain. This is a drainage failure. The membrane or the pitch of the assembly is no longer shedding water, and the Schluter component at the transition is the first place it shows.
- A popped or delaminated surface at a driveway-to-walkway transition. The stone or tile has lost its bond and comes up in one piece. It’s most common on surfaces that see full sun and traffic, and it typically means the uncoupling layer is compromised.
- Loose trim channels or gaps opening at a threshold. An opening gap at the trim is an entry point for water into the wall or curb. Left alone through a couple of wet seasons, it turns a trim replacement into a base repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers look for Antioch. These are installed ranges, not parts alone, because the labor is where the cost lives on this kind of work.
| Work | Installed Price Range |
|---|---|
| Targeted profile or trim replacement at steps, aprons, entries | Sized within your driveway and paver scope; quoted per job |
| Sealing / joint stabilization after a repair | $250 – $700 |
| Paver driveway installation (full assembly, including edge profiles) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (when the base has failed under the assembly) | $5,000 – $14,000 |
What drives the range: how much of the assembly has to come up to reach the failed layer, whether the base is sound, and whether the visible finish needs an exact OEM match. Our estimates are upfront and line-item, so you see the material, the labor, and the prep as separate lines. The number you see is the number you pay. Every project is covered by the 730-Day Done Right Promise.
Call (888) 419-3650 for a free estimate. It’s a live person on the line, 24 hours a day.
DIY or Call Us?
There’s a safe half and a risky half to this work, so here’s the honest split. On the safe side, you can photograph the profile, measure the paver and tile thickness in millimeters, note where water is pooling, and check for movement at the step nosing with your hand. That information alone makes a quote accurate.
Where owners get in trouble is in the removal and the re-set. Pulling a profile from a bonded edge often cracks the adjacent stone or paver, and once that piece is out, the hidden failure underneath is now open to the weather. Resetting a paver or step-edge assembly on a compromised base makes it look fixed while water keeps working underneath. It’s also where a heavy paver can come down on a hand or a foot, and where a mis-pitched re-set redirects water into a foundation. On anything involving a step, a curb, or a driveway apron, we recommend having a trained technician do the work. Our technicians are background-checked and arrive in uniform.
Have photos and measurements ready? Call (888) 419-3650 and we’ll get you a written estimate.
FAQs
Schluter components themselves are typically rated for the life of the assembly, and the failure is almost never the product. In Antioch, the limiting factor is the base. Our clay soils expand and contract with our wet-winter, dry-summer cycle, so a base that wasn’t built for movement will push a profile loose well before a quality Schluter piece wears out. A properly built base under a paver driveway lasts decades. Call (888) 419-3650 for an exact quote on a repair – estimates are free.
Often, yes. A single lifted profile, a loose trim channel, or a popped stone at a transition can be re-set and re-bonded on its own, provided the base below it is sound. What we can’t do is band-aid a base failure, and we’ll tell you which situation you’re in before you commit to any work. Call (888) 419-3650 and we’ll walk you through what’s repairable and what isn’t.
A targeted profile or trim replacement at a step or an apron is typically a one-visit job. If the base or the membrane underneath has failed, expect the schedule to stretch out across days for access, prep, cure, and reset. Most jobs are completed in a single visit; the multi-visit cases are base and drainage repairs, and we lay out the timeline in your written estimate before we start. Call (888) 419-3650 to schedule your free estimate.
We measure the assembly in person, match the profile thickness, reveal, and finish to the existing spec, and order the exact piece. On visible anodized or brushed trim we go OEM for a real match. On hidden membranes and non-visible trim, we evaluate quality aftermarket equivalents where they make sense for cost. We don’t stock parts, so every part is ordered to your job. Call (888) 419-3650 for a free estimate and we’ll handle sourcing from there.
When you’re ready, call (888) 419-3650. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.