Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Roofing: The Antioch Owner’s Guide
If your Schluter roof system has a failed trim, profile, or flashing component, we install Schluter-compatible replacements and the price for the work typically runs $400 to $1,800 for a targeted repair and $8,000 to $20,000 for a full roof replacement. Most simple profile and trim swaps are handled in a single visit once the correct part is on hand. Owners usually discover the problem after a hard Antioch rain, when water starts tracking behind a Schluter profile at a valley, chimney, or wall junction, or when they spot a loose or brittle trim edge from the ground.
Which Schluter Models This Applies To
Schluter makes roofing-related profiles and transition components that show up around roof edges, valleys, and waterproofing junctions, and the part that fails is almost always tied to a specific profile series rather than the whole roof. The first step is identifying what you have. Look for the stamp or label on the exposed edge of the profile, measure the profile height and the length of the leg, and note where it sits on the roof.
For Schluter specifically, the OEM-versus-aftermarket call matters more than it does for commodity flashing. Schluter profiles are engineered to a specific leg height and drainage geometry, and a generic aftermarket substitute that looks close often sits a few millimeters off, which is enough to let water wick behind it. When the original is discontinued or the label is gone, we match by measurement and roof detail rather than by guesswork. We don’t claim to stock Schluter parts or carry them on a truck. What we do is source the correct replacement and install it right. Groundwork Construction Co. of Antioch is an independent service provider and is not affiliated with Schluter. We also work with KraftMaid, Cambria, and Silestone on the interior side of the same homes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Roofing Is Failing
The symptoms are usually quiet at first and obvious after a storm. Here’s what we actually see on Antioch roofs:
- Water staining or damp sheathing near a roof edge or valley. The profile has lifted or separated and water is tracking behind it instead of shedding off.
- A loose or lifted trim edge you can see from the ground. Fasteners have backed out or the substrate has swelled, and the profile no longer sits flat.
- Brittle, cracked, or chalky profile material. Years of Contra Costa County sun and heat cycling break down the material, and it fails at the bend points first.
- Peeling paint or a rust streak below the roofline. Water is sitting behind the profile and bleeding down the fascia or wall, which means the failure has been active for a while.
- Granule loss and exposed felt along the same run of roof. When the profile fails it usually takes the adjacent underlayment with it, so the surrounding roof shows wear too.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing for this work in Antioch depends on how much roof the failed part touches. A single profile or trim section that lifts cleanly is on the low end. When the failure has let water into sheathing, fascia, or underlayment, the repair grows into carpentry.
- Targeted profile or trim repair: $400 to $1,800 installed, including removal, substrate check, and replacement.
- Roof repair where water has reached sheathing or fascia: $400 to $1,800, moving toward the top of that range when carpentry is involved.
- Roof replacement when the failure is systemic: $8,000 to $20,000, depending on roof size, pitch, and material.
What drives the range is access, roof pitch, how much surrounding material has to come up to reach sound substrate, and whether the correct part has to be sourced. You get upfront pricing with no surprises and a written line-item quote before we start. All work carries the 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things without getting on the roof: look for water stains from inside the attic, photograph the profile from the ground, and note the label or measurements if it’s visible. That information helps us quote faster.
Where DIY goes wrong on roofing profiles is at height and at the waterproofing layer. Getting on a pitched roof to pry up a profile is how homeowners end up in the ER, and prying the wrong way tears the underlayment and turns a $400 repair into a $1,800 one. If you’re not comfortable on a ladder or the failure is at a valley or wall junction, leave it to a trained crew. Our technicians have up to 12 years of experience, and they’re background-checked and uniformed. Call (888) 419-3650 and we’ll get you an honest read on what’s actually failed.
FAQs
Expect 10 to 20 years for a properly installed profile, with the shorter end more likely on west- and south-facing runs where Antioch’s summer heat and UV exposure are hardest on the material. Sun exposure and how well the profile drains determine where you land in that range. Call (888) 419-3650 for an exact look at yours.
Yes, in most cases a single failed profile or trim section can be repaired without touching the rest of the roof. Repair is the right call when the failure is isolated and the substrate underneath is dry. If water has reached sheathing or the same detail is failing in several places, replacement makes more sense. Call (888) 419-3650 and we’ll tell you which you’re looking at.
Most single-profile replacements are completed in a single visit once the correct part is on hand. Larger repairs that involve carpentry or multiple sections can run longer, and we’ll give you the timeline in the written quote before we start. Call (888) 419-3650 to schedule your free estimate.
We identify the profile by stamp, measurement, and roof detail, then source the correct replacement from suppliers who carry Schluter-compatible components. We don’t stock parts or carry them on a truck, so sourcing is part of the job and built into the quote. Call (888) 419-3650 and we’ll start the match.
If you’re in Antioch and your Schluter roofing has a failed profile or trim, the fastest path to a real answer is a call. We answer live, 24/7, at (888) 419-3650. You’ll get a free estimate, a written line-item quote, and upfront pricing with no surprises. Backed by the 730-Day Done Right Promise, because the part may be small but the water damage behind it isn’t.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.