Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Antioch Owner’s Guide
Tamko fence installation in Antioch typically runs $3,500 to $9,000 installed, depending on linear footage, material, and site conditions, and we can usually schedule a free on-site estimate within a few days. Most Antioch owners discover a fencing problem the same way: a gate that drags, a post that leans after the first winter rain, or boards that warp and pull loose faster than they expected. Tamko makes asphalt roofing shingles out of its Texas plants, and it does not manufacture fencing; if a product label or a sales sheet pointed you toward “Tamko fencing,” the material you actually have is a fence system from another maker, and we’ll help you identify what’s really on your property. We install Tamko-compatible fence systems and match materials to what’s already standing, and every fence we build is covered by our 730-Day Done Right Promise. Call (888) 419-3650 and a live person answers, day or night.
Which Tamko Models This Applies To
Here’s the honest part, and it’s the piece most homeowners never get told. Tamko’s product catalog is asphalt roofing shingles, roofing cements, and related roof accessories. There is no Tamko fence line, so there’s no model number to match and no OEM part to order. What you have is one of three things: a fence built or repaired by a crew that also happened to be a Tamko roofing contractor, a homeowner or installer who called any asphalt-shingle-derived product “Tamko” out of habit, or a mislabeled material from a reseller. Fence materials you’ll actually find in Antioch homes are Western red cedar, pressure-treated pine, redwood, vinyl, aluminum, and chain link. To identify yours, check the posts and rails directly: cedar and redwood read warm and reddish, pressure-treated pine has a greenish or brownish tint and visible mill stamping, and vinyl is smooth and non-grained. A mill stamp usually spells out the species and grade, which matters more than any brand name. Once we know the species and dimension, we spec the replacement to match: a 4×4 post is not a 4×4 post across species, and cedar takes a different fastener and stain schedule than treated pine. From there it’s OEM-grade or better-equivalent material to what’s standing, never a mystery board pulled off a shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Fence Installation Is Failing
A fence tells you it’s failing well before it falls over. These are the symptoms we see most in Antioch:
- Posts leaning after rain. Antioch’s clay-heavy soil swells when wet and shrinks when dry, and a post set in shallow concrete or bare dirt will rock and tilt within a season or two. The fix is a deeper, properly belled footing, not a shim.
- Boards warping and pulling loose. Cupping and twisting usually means the material wasn’t sealed on all sides or the fasteners are undersized, so the board moves with every temperature swing and backs the nails out.
- Gates that drag or sag. A sagging gate is almost always a hinge or post problem, not a gate problem. A post that has absorbed moisture and lost its anchor will pull the whole gate out of square.
- Gray, splintering, or checking wood. Sun-bleached grain and deep cracks in the board faces are what untreated or unsealed wood does after a few dry Contra Costa summers. Once the wood checks deeply, it holds water and rots from the inside.
- Rust streaks and loose posts at the base. Rusted fasteners and posts that wobble in their holes signal water getting in and the footing failing, which is a stability and safety concern, not just cosmetic.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Antioch runs $3,500 to $9,000 for a typical residential run, and here’s what moves the number: linear footage, material choice (vinyl sits lower in the range, cedar and redwood higher), post spacing, gate count, and how much old fencing has to come out and go to the dump. A basic vinyl or treated-pine run on flat ground with a couple of gates lands near the bottom of that range; a long cedar run with tricky grading, multiple gates, and demolition of an existing fence climbs toward the top. Every quote is upfront and line-itemed: we show the material, the footage, the labor, and the haul-away separately, so you see exactly where the money goes, and the number you see is the number you pay. Every fence we install is backed by the 730-Day Done Right Promise, and if it’s not done right, we make it right. If you’re planning a larger project, we also offer 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
Some fence work is genuinely owner-friendly. You can walk the line and flag loose posts, check gate hardware and re-tighten hinges, and spot rot by probing the base of each post with a screwdriver. What you shouldn’t tackle is setting new posts in Antioch’s clay soil, resetting a failed footing, or pulling and re-hanging a heavy gate. Fence posts are load-bearing, and a footing that wasn’t dug deep enough or belled at the bottom will fail again, often within a season, and a leaning post or a gate that drops on someone is a real injury risk. We handle the digging, the footings, the materials, and the cleanup. Call (888) 419-3650 for a free estimate; technicians arrive background-checked and in uniform, and a real person picks up around the clock. We also work in kitchens and baths with brands like KraftMaid, Cambria, and Silestone if your project goes beyond the fence line.
FAQs
Vinyl and aluminum fences typically last 20 to 30 years in Antioch’s climate, while wood fences usually run 10 to 15 years before posts and boards need attention, and treated pine on a properly footed install holds up longer than untreated. The single biggest factor is the footing and drainage, not the material. Sun and dry summers wear the surface; clay soil and winter rain attack the base. Call (888) 419-3650 for an honest read on whether your fence is worth repairing or replacing.
Yes, often just a section or a specific failure point can be repaired, and that’s usually the smart first move if the damage is localized and the posts are still solid. We assess whether it’s a post, a gate, a run of boards, or a broader footer issue before recommending anything. If a repair will outlast a full replacement for a fraction of the cost, we’ll tell you that. Call (888) 419-3650 and we’ll take a look.
Most residential fence runs in Antioch are completed in a few days, and smaller projects can wrap up in a single visit, while longer runs with multiple gates and demolition of an existing fence take longer. Weather and footing conditions are the two biggest variables. We give you a realistic timeline upfront so there are no surprises. Call (888) 419-3650 to schedule your free estimate.
We source fence materials from verified suppliers and match the species, dimension, and grade to what’s already on your property, so a repaired or extended run looks and performs like the original. Since Tamko doesn’t manufacture fencing, there’s no proprietary part to chase; we determine what material is actually in place and spec a quality match. Every install is covered by the 730-Day Done Right Promise. Call (888) 419-3650 and we’ll walk you through the options.
Ready to put a fence in that stays level, holds its posts, and comes with a warranty you can actually read? Call Groundwork Construction Co. of Antioch at (888) 419-3650 for a free estimate and design consult. A live person answers every call, around the clock, and we’ll give you clean, upfront pricing before any work begins, with $1,000 off projects over $10,000 and 0% financing for 18 months available.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.