Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The Antioch Owner’s Guide
Therma-Tru windows and doors in Antioch are installed at $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated units, with Therma-Tru entry door systems quoted per opening. Most jobs run in a single visit once the correct part is matched to your model line. If you’re calling about a failed part rather than a full replacement, we can source and install it, and our technicians have up to 12 years of experience on doors and windows across the East Bay.
Owners in Antioch usually discover a failed Therma-Tru part in one of three moments: the door won’t latch without a shoulder shove, the multipoint hardware locks but won’t release, or a hinge starts dragging the slab against the frame as the season changes. All three point to worn components, not necessarily a failed door. Here’s how to identify what you have and what it will cost to put right.
Which Therma-Tru Models This Applies To
Therma-Tru’s residential lineup spans fiberglass and steel entry systems, including the Smooth-Star, Classic-Craft, and Fiber-Classic door families, plus a deep catalog of door slabs, sidelites, and hardware sets that fit them. The parts inside those systems are not universal. A multipoint lock from one series will not fit another, and hinge position, weatherstrip profile, and threshold height change between models and vintage years. That’s the compatibility gotcha that trips up most homeowners ordering online: the part looks right in a photo but the screw pattern and backset are wrong.
Start with the label. Therma-Tru stamps the model and series on the door slab edge or the top of the slab, and your window units carry a glazing label behind the sash or on the frame. Write down the series, the slab size, and measure the existing hardware center-to-center before you call. Those three facts let us match the right part the first time.
On the OEM-versus-aftermarket question: genuine Therma-Tru parts give you an exact fit and the factory finish, which matters on fiberglass doors where the hinge and lock hardware anchors into the stile. Quality aftermarket equivalents are a legitimate option for weatherstrip, sweep, and some hardware, and they cost less. We’ll tell you which is which for your specific door rather than steering you one way across the board.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Windows & Doors Part Is Failing
- The door won’t latch or locks unevenly. The strike or multipoint lock has worn or the slab has shifted on its hinges. In Antioch’s dry summers, wood components and even fiberglass slabs move slightly, so a lock that worked in spring can catch by August.
- A hinge drags or the door sags at the top corner. Hinge screws loosened or the hinge leaf has worn. Left alone, a dragging slab chews the weatherstrip and lets the wind in.
- You feel a draft or see daylight at the weatherstrip. The perimeter seal or door sweep has flattened. Our hot, dry inland summers bake the seal faster than a coastal climate would, so East Bay doors often need weatherstrip before they need anything else.
- The window won’t stay open, or slides too easily. The balance or sash hardware has worn out. A window that slams shut is a safety hazard, especially on upper floors.
- Fogging between the glass panes. The insulated glass seal has failed. This one is a glazing unit replacement, not a hardware fix, and it means the window has lost thermal performance.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Antioch homeowners, the honest ranges are these. A single failed part like a multipoint lock, hinge set, or weatherstrip typically runs from a modest service call up to a few hundred dollars installed, depending on the part and the door model. Full window replacement runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000. Entry door systems are quoted per opening based on slab size, hardware, and glass options.
What drives the range: the model line, whether the part is OEM or quality aftermarket, glass type, and how much of the frame we’re touching. We quote upfront, and the number you see is the number you pay. Every job is backed by our 730-Day Done Right Promise, so if the part or the install isn’t right, we make it right. We offer 0% financing for 18 months and $1,000 off projects over $10,000 to make larger replacements easier to budget.
DIY or Call Us?
Some things you can check safely yourself. Look at the door label to identify your series. Test the lock with the door open to see if the strike or the lock is the problem. Feel along the weatherstrip for gaps. Measure your hardware.
Where DIY goes wrong: replacing a multipoint lock or hinge set on a fiberglass door means the slab has to align exactly with the new hardware, and a misaligned hinge can crack the stile or leave you with a door that never seals right again. Glass swaps are worse, because a dropped pane or a cut hand is a real risk. For anything beyond a weatherstrip or a sweep, call us. We’ll diagnose it, quote it upfront, and if it’s a simple swap, most jobs are done in one visit. Reach us at (888) 419-3650.
FAQs
Weatherstrip and door sweeps typically last 5 – 10 years before they flatten and leak air, and hardware like locks and hinges lasts longer but takes a beating in the East Bay’s dry summer heat. Expect the seal to want attention before the glass does. Call (888) 419-3650 for an inspection and a straight answer on what’s due.
Often yes. A worn strike can be adjusted, a hinge set can be replaced without touching the slab, and weatherstrip swaps are quick. Fogged glass and cracked glazing units can’t be repaired, only replaced. We’ll tell you honestly which side of that line your door falls on so you’re not paying for a full replacement you don’t need. Estimates are free.
A single hardware or weatherstrip swap usually finishes in one visit, and a full door or window replacement runs longer depending on the opening and the model. We’ll give you a realistic timeline in the quote, not an optimistic one. Call (888) 419-3650 to schedule your free estimate.
We match it to the model and series from your door or window label plus your hardware measurements, then order the correct OEM part or a quality aftermarket equivalent when it’s the better call on cost. We don’t guess on fit. Bring us the label details and we’ll handle the rest.
If your Therma-Tru door or window has a part that’s failed, the fastest path to a fix is a conversation. Call (888) 419-3650 for a free estimate, upfront pricing with no surprises, and a plan that’s built to last and backed in writing. We also work with KraftMaid, Cambria, and Silestone on the wider remodel, so one trusted partner can handle the whole job from foundation to finish line. Groundwork Construction Co. of Antioch is an independent service provider, not affiliated with Therma-Tru. Our phones are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co. of Antioch, serving Antioch and nearby areas.