Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Antioch Homeowners Choose Therma-Tru Construction
Groundwork Construction Co. of Antioch provides independent Therma-Tru installation, repair and service for entry and patio door systems across Antioch, CA. What sets our Therma-Tru work apart is process: we read the brand’s installation manuals, match sills, hinges and weatherstrip to the exact series on your door, and correct the framing and threshold mistakes that cause most early failures. Being independent means our recommendation follows what your door actually needs, not what a manufacturer program rewards.
We’re an independent Therma-Tru service provider, not an authorized or affiliated dealer, and we say so plainly. Our technicians have up to 12 years of experience. We work on Smooth-Star, Classic-Craft, Fiber-Classic, Benchmark and Advantage systems throughout Antioch, and every job is backed by our 730-Day Done Right Promise. Calls come in to a live person 24/7. Reach us at (888) 419-3650.
Why Trust Groundwork Construction Co. of Antioch for Your Therma-Tru Construction?
Therma-Tru doors are engineered systems, not slabs bolted into a hole. The slab, the frame, the adjustable sill and the glass lite are matched at the factory to a specific series. Our technicians have handled these systems long enough to know the difference between a Smooth-Star sill assembly and the heavier Classic-Craft entry profile, and they’ll catch when a part on the shelf isn’t the right one for the door in front of them.
That matters when it comes to your warranty. Overdriven screws, cut frames and forced shims can all give Therma-Tru grounds to deny a claim. We follow the manufacturer’s clearances and attachment points, keep openings flashed and drained the way the installation instructions call for, and use OEM-compatible parts whenever the frame is sound. This is warranty-safe practice, not a shortcut. We carry the same discipline into the wider project, whether a full kitchen remodeling or a bathroom remodeling opens up the wall around the door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Antioch
Antioch’s layout sits at the foot of the East Bay hills along the Delta, where expansive clay soils, a high water table near the riverfront, and a housing mix split between aging mid-century tract homes on the flats and newer hill subdivisions all shape how door systems age. Each of these issues shows up regularly in Antioch homes.
- Sill and threshold leaks on Fiber-Classic and Smooth-Star entries. When the adjustable sill is set too high or the sill pan was skipped during install, water wicks into the subfloor and buckles interior flooring. It’s the most common failure we see, and it usually shows after a wet winter in the older flats along the river-adjacent blocks, where the water table runs high and the ground stays saturated longer than it does up the hills. That leftover moisture has nowhere to go but under the door frame if the sill isn’t shedding it correctly.
- Fiberglass slab spidering at the lock bore and hinge-side stile. Overdriven screws and a slab hung without the specified clearance crack the fiberglass at its stress points. The damage often grows quietly until the lock can’t hold a straight line or the hinge pulls loose from the stile.
- Warped or sagging slabs and sticking latches on Classic-Craft entries. The usual cause is a three-point frame anchored out of plumb into a wall that was never shimmed square. The slab tracks against the jamb, the latch binds and the door fights you every time you close it. Antioch’s seasonal soil swelling and shrinkage aggravates this in homes where the frame was anchored to a settling wall in the first place.
- Failed weatherstrip, corner seals and glass lite seals on Simulated Divided Lite doors. These read as daylight gaps, whistling drafts and fogged insulated glass units. The persistent afternoon Delta winds and wind-driven dust push against every gap in the system, so a worn seal that might have been a minor draft in a sheltered location turns into a genuine air leak here.
- Hardware and multi-point lock wear on Benchmark and Advantage systems. Handlesets, deadbolts and multi-point mechanisms wear through years of daily use, and the smaller Benchmark profile suffers first. Sticky hardware on these systems is usually mechanical wear, not a slab problem.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use Therma-Tru OEM sills, weatherstrip, hinges, sweeps and glass lites whenever the door frame is sound. These parts are matched to the specific series and slab thickness, and a generic replacement that almost fits will fail sooner, usually at the bottom corner where the water starts. Where an OEM part has been discontinued, we source quality aftermarket hardware and tell you exactly what we’re installing and why.
We don’t claim to stock Therma-Tru parts locally. Each job gets its parts sourced to the series on the door, which is why we ask for the model and serial before we schedule. On repair versus replacement, the call is usually clear: if the slab is cracked at the lock bore or the frame is rotted at the sill, honest advice is replacement, because patching a compromised entry costs more within a few seasons. If the frame is solid, we repair. Call (888) 419-3650 to start with an inspection.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We walk the opening, check the sill height and pan, test the slab for square and plumb, and inspect the rough opening for rot and flashing. Model and serial come off the door so parts match the series.
- 2
Repair or install. We pull and reset sills, add pans where they’re missing, re-shim and re-secure out-of-plumb jambs, replace weatherstrip and corner seals, or set a new prehung system per Therma-Tru’s installation instructions with the specified clearances.
- 3
Test. We open and close the door through a full cycle, check the latch catches cleanly, run a water test at the sill and confirm there’s no daylight through the perimeter.
- 4
Warranty. Every job is covered by the 730-Day Done Right Promise. If something isn’t right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Antioch
We service and install the full Therma-Tru range: Smooth-Star fiberglass door slabs and entry systems, Classic-Craft American Style and Rustic Collection fiberglass entries, Fiber-Classic and entry systems with Simulated Divided Lite glass, and Benchmark and Advantage series fiberglass doors. That covers single entry doors, sidelight and transom configurations, and patio systems. We don’t claim to keep any of these lines in stock; we specify to your opening and order to the job. If you’re unsure which series you have, we’ll identify it on site.
We Also Service These Brands
Groundwork Construction Co. of Antioch isn’t tied to one brand. We work across KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures alongside Therma-Tru doors, so an Antioch remodel that touches the entry, the kitchen and the bath can run through one contractor instead of three. From foundation to finish line, you get one point of accountability and one written scope.
FAQs – Therma-Tru Construction Service in Antioch
No. We’re an independent Therma-Tru installer and repair provider, not authorized, affiliated or sponsored by the manufacturer. We work to Therma-Tru’s published installation standards because that’s what protects your door and your warranty, and we’ll tell you honestly when a manufacturer claim may apply.
Yes. We use Therma-Tru OEM sills, weatherstrip, hinges, sweeps and glass lites whenever the frame is sound, because these parts are matched to the exact series and slab thickness. Where an OEM part is discontinued, we source quality aftermarket hardware and explain the trade-off before we install it.
Most Therma-Tru service calls in Antioch finish in a single visit when we’re working on weatherstrip, hardware or a sill reset. A full removal and reset, or an entry replacement where the rough opening needs rot repair and new flashing, typically takes longer and gets scheduled once we’ve seen the opening.
We cover Smooth-Star, Classic-Craft American Style and Rustic Collection, Fiber-Classic with Simulated Divided Lite glass, and Benchmark and Advantage fiberglass entries, including sidelight and transom configurations and patio systems. If you don’t know your series, the model and serial on the door frame tell us.
Not if the work follows Therma-Tru’s installation instructions. Overdriven screws, cut frames and missing flashing are what put a manufacturer claim at risk, and those are exactly the mistakes we avoid. We document what we find and what we install so there’s a paper trail if a claim ever comes up.
Usually yes, when the slab and frame are structurally sound. A failed glass lite, worn weatherstrip or bad corner seals on a Therma-Tru door can be replaced on their own, and that’s the budget-smart call if the frame is solid and the sill pan is intact. If the slab is cracked at the lock bore or the frame is rotted at the sill, replacement is the honest answer. Call (888) 419-3650 for an inspection – estimates are free.
Repair work on a Therma-Tru entry typically runs a few hundred dollars, while a full door replacement depends on the series and opening. Kitchen and bath projects that share the same framing often carry the bigger line items: full kitchen remodeling runs $14,000 – $45,000, full bathroom remodeling $9,000 – $28,000, window replacement $4,500 – $15,000, and roof repair $400 – $1,800. Call (888) 419-3650 for an exact quote – estimates are free.
| Service | Typical Cost in Antioch |
|---|---|
| Roof Repair | $400 – $1,800 |
| Window Replacement | $4,500 – $15,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
Book Your Therma-Tru Service in Antioch, CA
If your Therma-Tru entry is leaking at the sill, sticking at the latch or letting in daylight, we’ll tell you what’s wrong and what it takes to fix it. Call (888) 419-3650 for a free estimate in Antioch. Upfront pricing, no surprises, and the 730-Day Done Right Promise behind every job.
Written by the team at Groundwork Construction Co. of Antioch.